Hikvision DS-1270ZJ-DE7 - Wall Mount Bracket for Dome Camera

The Hikvision DS-1270ZJ-DE7 is a genuine Hikvision wall mounting bracket for dome cameras, holding the camera off the wall so it can look down and across the area you want covered.

Who is it for?

Any dome camera going on a vertical surface rather than a ceiling. Domes are designed to mount flat overhead, so fixed straight to a wall they end up aimed at the ground immediately below. The bracket puts the camera out and angled, which is what makes the view usable.

The cable runs internally through the arm, so the run is enclosed from the wall to the camera base — drier connections and a far tidier finish than surface cable into a flush base.

What you'll need with it

• A matching camera. Hikvision brackets are model-specific — the fixing pattern and neck diameter have to line up. Send us your camera model and we will confirm before you order.
• Fixings for the substrate — brick, block, render and timber each want a different plug and screw.
• Sealant for the wall entry, which is what actually keeps water out of the cable run.

Frequently asked questions

Will it fit my camera?

Only the matching models. Tell us the camera model and we will check before you buy.

Do I need a junction box as well?

Usually not — the bracket has a cavity for the cable and connections. Junction boxes are for flush-mounted cameras with surface-run cable.

Is it suitable outdoors?

Yes. Seal the wall entry properly on installation.

Browse all CCTV brackets and accessories or the IP camera range. Need help matching a bracket? Contact us, call 01902 902251, or visit the Wolverhampton trade counter.