Hikvision DS-1273ZJ-140/BLACK - Black Wall Mounting Bracket for Dome Camera

The Hikvision DS-1273ZJ-140/BLACK - Black Wall Mounting Bracket for Dome Camera is a genuine Hikvision wall mounting bracket in black, holding the camera off the wall and out at an angle so it can look down and across the area you want covered. It is the same bracket as the standard DS-1273ZJ-140, finished in black to match Hikvision's black camera range.

When you need a wall bracket

Dome and turret cameras are designed to mount flat to a ceiling or soffit. A wall bracket lets you fit one to a vertical surface instead and still aim it properly — essential on a house wall, a gable end, a shop frontage or the side of a unit where there is no overhang to fix to.

It also carries the cable internally, so the run is enclosed from the wall to the camera base. That keeps water off the connections and gives a much tidier finish than surface cable and a flush base.

Who is it for?

Installers fitting a black Hikvision dome or turret camera to a wall. Zenith stock the white DS-1273ZJ-140 as well — pick this version when the camera is black so the bracket and camera match rather than drawing attention to the install.

What you'll need with it

• A compatible black dome or turret camera — the fixing pattern and neck diameter must line up with the camera base
• Suitable wall fixings for the substrate (brick, block, timber or cladding)
• Exterior-grade sealant for the wall entry

Choosing the right bracket

• The bracket must match the camera. Hikvision brackets are model-specific. Send us your camera model and we will confirm which bracket is correct before you order.
• Wall or pendant? A wall bracket comes out horizontally from a vertical surface. A pendant mount drops down from a ceiling or soffit. Pole and corner mounts adapt those to round posts and building corners.
• Colour. /BLACK is black, (G) or /G is grey, plain is white — match the camera for a deliberate-looking install.
• Genuine parts. Hikvision originals have the correct threads and seals. Generic brackets often fit loosely and let water track down into the camera.

Frequently asked questions

Will this fit my camera?

Only the matching models. Tell us the camera model and we will check before you buy.

Is this different to the standard DS-1273ZJ-140?

Only the finish. Dimensions, fixings and cable routing are identical — this one is black instead of white.

Do I need a junction box as well?

Usually not — most wall brackets have a cavity for the cable and connections. Junction boxes are for flush-mounted cameras with surface-run cable.

Is it suitable outdoors?

Yes. These are made for external use; seal the wall entry properly on installation.

Technical Specification

Browse all CCTV brackets and accessories or the IP camera range. Need help matching a bracket? Contact us, call 01902 902251, or visit the Wolverhampton trade counter.