Hikvision DS-1280ZJ-DE7 - Junction Box for Dome Camera

The Hikvision DS-1280ZJ-DE7 is a genuine Hikvision junction box, mounting between a dome camera and the surface so all cabling is enclosed and weatherproofed.

Who is it for?

Surface-run installations, which is most retro-fit work on brick and render. The box hides the cable tails and connectors, keeps water off the joints, and gives you somewhere to coil the slack that always ends up left over. It also lifts the camera clear of textured surfaces where a flush base would sit unevenly.

On a tidy install it is the difference between a professional finish and a loop of cable taped to the wall.

What you'll need with it

• A matching camera. Junction boxes are model-specific — the mounting holes and diameter must line up with the camera base. Send us the camera model and we will confirm before you order.
• Fixings for the substrate, rated for the camera's weight since the box carries it.
• Sealant for the cable entry on any external installation.

Frequently asked questions

Will it fit my camera?

Only the matching models. Tell us what you have and we will check before you buy.

Do I actually need a junction box?

Not if the cable comes up through the camera base from inside. For surface-run cable outdoors it is strongly recommended — it is what keeps the connections dry.

Is it weatherproof?

Yes, when fitted correctly with the supplied gasket and the cable entry sealed.

Browse all CCTV accessories and brackets or the IP camera range. Not sure what you need? Contact us, call 01902 902251, or visit the Wolverhampton trade counter.