The Hikvision DS-7716NI-M4/16P is a 16-channel Ultra Series network video recorder in a 19-inch 1.5U rack chassis, with sixteen built-in PoE ports, four SATA bays and 256 Mbps of incoming bandwidth.
Who is it for?
Sixteen-camera systems that need serious storage and want the recorder to power the cameras. Sixteen PoE ports at a 200 W budget means one cable per camera and no separate switch; four drive bays plus eSATA means retention measured in months rather than weeks.
This is the version to choose on a standalone system. If the site already has a managed PoE switch — common on commercial networks where the IT team wants camera power under their control — the plain DS-7716NI-M4 is the same recorder without the PoE ports, and cheaper.
Specification
- Channels: 16-ch IP video input, up to 32 MP (up to 8-ch at 32/24/16 MP; all channels below 16 MP)
- Bandwidth: 256 Mbps incoming / 256 Mbps outgoing
- PoE: 16 ports, 10/100 Mbps, ≤200 W total budget, IEEE 802.3af/at
- Storage: 4 SATA bays, up to 16 TB per disk, plus 1 eSATA. Drives are not included.
- Compression: H.265+/H.265/H.264+/H.264
- Video out: HDMI 1 up to 8K (7680 × 4320)/30Hz, HDMI 2 up to 4K/60Hz, VGA 1080p, plus CVBS. HDMI 1 and VGA output simultaneously; HDMI 2 runs independently for a second screen
- Decoding: 2-ch@32MP, 4-ch@16MP, 10-ch@8MP or 16-ch@5MP (30 fps)
- Playback: 16-ch synchronous
- Cameras: Hikvision and third-party ONVIF 2.5
- Remote viewing: Hik-Connect and iVMS-4200, up to 128 connections
- Audio: 1-ch RCA out, 1-ch two-way audio
- Alarm I/O: 16 in / 9 out, plus controllable 12 VDC 1 A output
- Serial: 2 × RS-485 half-duplex, 1 × RS-232
- Network: 1 × RJ-45 10/100/1000 Mbps
- USB: 2 × USB 2.0 front, 1 × USB 3.0 rear
- Security: EN 303645, secure boot, signed firmware, AES128 stream encryption, IEEE 802.1X, HTTPS, IP/MAC filtering, brute-force delay protection
- Power: 100 to 240 VAC 50–60 Hz, ≤15 W without drives and PoE off
- Environment: −10 °C to 55 °C, 10% to 90% humidity
- Chassis: 19-inch rack-mounted 1.5U, 445 × 400 × 75 mm
What you'll need with it
- Hard drives — none are supplied. Four SATA bays, up to 16 TB each. Use surveillance-rated drives such as WD Purple; desktop drives are not built for continuous writing. Size them with our CCTV storage calculator.
- Cameras within the 200 W PoE budget. Fine for sixteen standard cameras, but PTZs, heaters and illuminators draw considerably more — send us your models and we will total it before you order.
- Rack space — this is a 1.5U 19-inch chassis, not a desktop box.
Frequently asked questions
How is this different from the plain DS-7716NI-M4?
This version has sixteen PoE ports built in and powers the cameras directly. The plain M4 has none and needs a separate PoE switch. Everything else — channels, bandwidth, drive bays, outputs — is identical.
Does it come with hard drives?
No. Four SATA drives up to 16 TB each, supplied separately.
Will 200 W run sixteen cameras?
Comfortably for standard fixed cameras, which typically draw 5–12 W each. PTZs with heaters can draw 30 W or more, so a mixed system needs the total checked — tell us your models.
Can I run two monitors?
Yes. HDMI 2 runs independently of HDMI 1 and VGA, so two screens can show different views.
Is it RAID capable?
No. Four independent disks. If you need RAID, ask us about the DS-96000 series.
Browse the full NVR range, IP cameras or surveillance hard drives. Need help specifying a system? Contact us, call 01902 902251, or visit the Wolverhampton trade counter.