The Hikvision iDS-9632NXI-M8/X is a 32-channel DeepinMind network video recorder in a 2U chassis, with eight SATA bays, full RAID support, two AI engines and 8K output.
Why the 9600 series rather than the 7700
Same DeepinMind analytics platform, but three things change at this level:
- RAID 0, 1, 5, 6 and 10 across eight bays — a failed disk no longer means lost footage. On a system carrying face-match evidence, that is the difference between a maintenance job and a serious problem.
- Face capture library doubles to 10,000,000 pictures, across up to 32 libraries rather than 16.
- Dual VGA alongside dual HDMI, so two full monitor pairs can run — a control room arrangement rather than a single screen.
It also brings 16 alarm inputs and 9 outputs with a controllable 12 VDC supply, and a keyboard port for a dedicated PTZ controller.
Be realistic about whether you need DeepinMind
Most sites do not. If you want fewer false alarms and quick searching, the DS-9632NI-M8 gives you the same eight-bay RAID chassis without the AI, and a VPro model gives you AcuSeek for far less. DeepinMind at this level earns its cost where face matching against a large watch list is an operational requirement, and where someone will administer the libraries properly.
Note there is no PoE — cameras are powered by switches, which is normal at this scale.
Specification
- Channels: 32-ch IP video input, up to 32 MP (up to 8-ch at 32/24 MP)
- Bandwidth: 320 Mbps incoming / 400 Mbps outgoing
- AI engines: 2, each able to run an intelligent algorithm; engine mode adjustable
- AcuSearch: up to 691,200 targets/day
- Face libraries: up to 32 libraries — 100,000 in list, 10,000 stranger, 10,000,000 face captures
- Face comparison: 32-ch, 48 pictures per second
- Video structuralisation: up to 12-ch at 2 MP, 8-ch at 4 MP or 4-ch at 8 MP
- Perimeter protection: 24-ch at 2 MP, 16-ch at 4 MP or 8-ch at 8 MP without Large Model; all channels with it
- ANPR: all channels with compatible cameras
- Storage: 8 SATA bays (3.5-inch), up to 16 TB per disk (128 TB), plus 1 eSATA. Drives are not included.
- RAID: RAID 0, 1, 5, 6 and 10
- PoE: none — cameras powered separately
- Compression: H.265+/H.265/H.264+/H.264
- Video out: HDMI 1 up to 8K/30 Hz with VGA 1 simultaneous; HDMI 2 up to 4K/60 Hz with VGA 2 simultaneous; plus CVBS. Note: with HDMI 1 at 8K, HDMI 2 is limited to 1080p
- Decoding: 2-ch@32MP, 4-ch@16MP, 8-ch@8MP, 16-ch@4MP or 32-ch@2MP (30 fps)
- Playback: 16-ch synchronous
- Audio: 2-ch RCA out, 1-ch two-way audio
- Alarm I/O: 16 in / 9 out, plus controllable 12 VDC 1 A output
- Serial: 1 × RS-232, 1 × RS-485 full-duplex, 1 keyboard port
- Network: 2 × RJ-45 gigabit, 128 remote connections, ONVIF profile S/G, SDK, ISAPI
- USB: 2 × USB 2.0 front, 1 × USB 3.0 rear
- Power: 100 to 240 VAC 50–60 Hz, ≤50 W without drives
- Chassis: 2U, 445 × 465 × 93 mm
- Certification: CE, FCC, UKCA, CB, UL, KC, RoHS, REACH, WEEE, RCM, LOA, BIS
What you'll need with it
- Hard drives — none are supplied. Eight 3.5-inch bays at up to 16 TB. Remember RAID 5 costs one disk to parity and RAID 6 costs two. Size it with our CCTV storage calculator.
- PoE switches — this recorder does not power cameras.
- Cameras specified for the analytics. Face recognition depends on position, angle and pixel density on the face far more than megapixels. Talk to us before ordering.
- 2U of rack space with proper airflow — eight spinning disks generate real heat.
Frequently asked questions
Which RAID level should I use?
RAID 5 for most sites; RAID 6 where retention is long, since a rebuild across large disks takes days and RAID 6 survives a second failure during it. Never RAID 0 where the footage is evidence.
How does it compare to the iDS-7732NXI-M4/16P/X?
Same channels and bandwidth. This adds RAID, eight bays instead of four, double the face capture library, dual VGA and a keyboard port — but has no PoE.
Does it power my cameras?
No. Use switches.
Does it come with hard drives?
No. Eight 3.5-inch SATA drives up to 16 TB each, supplied separately — surveillance-rated, not desktop.
Browse the full NVR range, IP cameras, PoE switches or surveillance hard drives. Specifying a system around facial recognition or ANPR? Contact us, call 01902 902251, or visit the Wolverhampton trade counter.