The Uniview NSW2100-9GT1GP-POE-IN is a lite cloud managed gigabit PoE switch with eight PoE ports, one further gigabit RJ45 port and one gigabit SFP port. It has a 120 W PoE budget, with up to 30 W on any single port.
The NSW2100-9GT1GP-POE-IN is a Uniview lite cloud managed Gigabit Ethernet PoE switch. Eight of its RJ45 ports supply PoE to IEEE 802.3af and 802.3at, so PoE IP cameras can be powered and connected over a single network cable.
This switch suits smaller camera systems where several PoE IP cameras need to reach a recorder over one network. Each of the eight PoE ports can supply up to 30 W, and the switch shares a 120 W total across them, so add up your cameras' power draw and compare it with that figure.
The extra gigabit RJ45 port and the gigabit SFP port give you options for an uplink to a recorder or the wider network. PoE status can be viewed, and PoE power switched on or off, in the app. The switch also offers up to 10 VLANs, port isolation, loop detection and N:1 port mirroring.
| Hardware Specification | |
| Ports Type | 8x 10/100/1000Mbps PoE port (RJ45); 1 x 10/100/1000Mbps port (RJ45) ; 1 x Gigabit SFP |
| Switching capacity | 20Gbps |
| Forwarding performance | 14.88Mpps |
| Packet Buffer | 4 M bit |
| MAC Address Table Size | 8K |
| Dimensions (W×D×H) | 169*132*40mm |
| Power Supply | AC: 100V to 240V, 50/60Hz |
| PoE Standard | IEEE 802.3af, IEEE 802.3 at |
| PoE Mode | ModeA (1236),ModeB (4578) |
| Max.PoE Power | Max capacity: 120W; Maximum PoE power for single port: 30W |
| Max.Power | 125W |
| Cooling Fans | 0 |
| Weight | 0.85KG |
| Operating Temperature | 0°C to 45°C |
| Operating Humidity | 10% to 90% (noncondensing) |
| Indicator | Power:; Off: Abnormal power input.; Green: Normal power input.; Yellow: The total PoE power is higher than 85% of the total power of the device.; Link/Act:; Off: Disconnected to the port; On: Connected to the port.; Blinking: Transmitting data. |
| Software Specification | |
| Ethernet | Supports full duplex, half duplex, and auto-negotiation working modes ; Supports enabling/disabling ports; Supports port auto-negotiation rate; Supports port flow statistics ; Supports four link aggregation groups (up to eight ports). |
| VLAN | allows up to 10 VLANs with IDs from 1 to 4094 |
| MAC Address Table Size | Support static MAC, up to 32. |
| POE | Allows to view PoE status and enable/disable PoE power supply in the APP |
| Loop Detection | Loop Detection |
| Security | Supports port isolation |
| Maintenance | Supports N:1 port mirroring.; Supports device upgrade, factory settings restoration, configuration import, configuration export, and device restart on the software. |
| System | Allows to view the device name, current version, IP address, MAC address, DNS, etc.; Allows to edit and manage the IP address and device name. |
| Compliance | |
| NDAA Compliant | Support |
You need PoE or PoE+ (802.3af or 802.3at) devices for the eight PoE ports, network cable for each run, and a mains supply of 100 V to 240 V AC, 50/60 Hz. Check that your cameras' combined draw stays within the 120 W budget. See IP cameras and NVRs for what to connect, and network cable for the runs.
We are a supplier, not an installer. We will go through the NSW2100-9GT1GP-POE-IN with you before you buy — how many cameras the 120 W PoE budget will power, and where the gigabit SFP uplink fits — and depending on your requirements and your area we can recommend a qualified trade installer. We have been operating since 2012 and you can visit our trade counter in Wolverhampton.
The maximum PoE capacity is 120 W in total, with up to 30 W on a single port. It supports IEEE 802.3af and 802.3at.
Eight 10/100/1000 Mbps PoE RJ45 ports. It also has one further 10/100/1000 Mbps RJ45 port and one gigabit SFP port.
Yes, in the app you can view PoE status and enable or disable the PoE power supply. Uniview's own title for this switch is lite cloud managed.
It has no cooling fans. Operating temperature is 0°C to 45°C and humidity 10% to 90% non-condensing.
Yes. Uniview products are supplied at trade prices to approved trade customers, so the price is shown once you are logged in to a trade account. Call 01902 902251 or see our trade customer page to open an account.
Delivery is within 1–3 working days to England, Scotland and Wales. We do not ship to Northern Ireland.
Yes. Our trade counter is at Unit 3, Park View Centre, 243 Dudley Road, Wolverhampton WV2 3JU. Call first so we can confirm the item is there for you.
Questions on specification or compatibility: call 01902 902251, see our FAQ and support pages, or contact us. Trade accounts are available — see trade customers. Browse the full Uniview range.
| Product Code | NSW2100-9GT1GP-POE-IN |
|---|---|
| Manufacturer | Uniview |
| Colour | Black |
| Device Port Speed | 10/100/1000 Mbps |
| Device Ports | 8 |
| Managed | Yes |
| PoE Ports | 8 |
| Uplink Port Speed | 10/100/1000 Mbps |
| Uplink Ports | 2 |
We provide tailored support for you and your CCTV system.
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
As cheap as £10, we will deliver your order 3 to 5 working days!
