The Uniview NSW3000-25GT1GP1GC-IN is a cloud managed gigabit Ethernet switch with 25 gigabit RJ45 ports, one gigabit SFP port and one gigabit combo port. The datasheet lists no PoE ports or budget, so plan PoE for cameras separately.
The NSW3000-25GT1GP1GC-IN is a Uniview cloud managed Gigabit Ethernet switch for linking network devices. It offers 25 gigabit RJ45 ports plus a gigabit SFP port and a gigabit combo port, with 54 Gbps switching capacity.
This switch suits a CCTV or general network where you need many gigabit connections, for example joining recorders, PoE switches and other network video devices. Its software can discover connected video devices and generate a network topology, and show information for up to 64 video devices.
It supports up to 32 VLANs in access and trunk modes, port isolation on downlink ports, port rate limiting, broadcast storm control and N:1 port mirroring. Maximum power draw is 18 W. The datasheet lists no PoE ports or budget, so treat it as a non-PoE switch and provide camera PoE from elsewhere.
| Hardware Specification | |
| Ports Type | 24 x 10/100/1000Mbps port (RJ45) ; 1 x 10/100/1000Mbps port (RJ45) ; 1 x Gigabit SFP ; 1 x Gigabit Combo |
| Switching capacity | 54Gbps |
| Forwarding performance | 40.176Mpps |
| Packet Buffer | 4 M bit |
| MAC Address Table Size | 8K |
| Weight | 1.85kg |
| Dimensions (W×D×H) | 440mm x 189.8mm x 44mm |
| Power Supply | AC: 100 to 240V, 50/60Hz |
| Max.Power | 18W |
| Cooling Fans | 1 |
| Operating Humidity | 5% to 90% RH, noncondensing |
| Operating Temperature | 0°C to 45°C |
| Indicator | Power:; Off: Abnormal power input.; Green: Normal power input.; Link/Act:; Off: Disconnected to the port; On: Connected to the port; Blinking: Transmitting data |
| Software Specification | |
| Ethernet | Supports full duplex, half duplex, and auto-negotiation working modes.; Supports port auto-negotiation rate.; Supports port priority flow control. ; Supports a link aggregation group (consist of two uplink ports) ; Supports port flow statistics ; Supports enabling/disabling ports |
| VLAN | Supports both access and trunk modes; allows up to 32 VLANs with IDs from 1 to 4094 |
| MAC Address Table Size | Support (up to 8K) .; Supports clearing the dynamic MAC address |
| Loop Detection | Loop Detection |
| QoS | Supports port rate limitation.; Supports broadcast storm control. |
| Security | Supports port isolation (only for the downlink ports); Supports locking login IP address, up to 64 addresses can be locked |
| Maintenance | Supports N: 1 port mirroring; Supports unified software configuration, management, and search; Supports discovering the connected video devices and generating a network topology on the software.; Supports device upgrade, factory settings restoration, configuration import, configuration export, logs export, and device restart on the software. |
| System | Allows to view the device name, device model, serial number, current version, IP address, MAC address, DNS, operation time, etc.; Allows to edit and manage the IP address and device name; Supports single-user management, user authentication, and password modification; Allows to view other switches information on the same network, up to 32 switches; Allows to view the connected video devices information, up to 64 devices |
| Compliance | |
| NDAA Compliant | Support |
You need a mains supply of 100 V to 240 V AC, 50/60 Hz, and network cable for each link. Because the datasheet gives no PoE budget, use a PoE switch or a recorder's PoE ports for any PoE cameras. An SFP module is needed to use the SFP port. See network switches and network cable.
We are a supplier, not an installer. We will go through the NSW3000-25GT1GP1GC-IN with you before you buy — whether you need PoE elsewhere in the system, and how the SFP and combo ports will be used — and depending on your requirements and your area we can recommend a qualified trade installer. We have been operating since 2012 and you can visit our trade counter in Wolverhampton.
The datasheet lists no PoE ports or PoE budget, and maximum power is 18 W. Treat it as a non-PoE switch, and ask us if you would like this checked before ordering.
It has 24 10/100/1000 Mbps RJ45 ports and one further RJ45 port, plus one gigabit SFP port and one gigabit combo port.
Switching capacity is 54 Gbps and forwarding performance 40.176 Mpps, with an 8K MAC address table.
The datasheet lists NDAA Compliant as supported.
Yes. Uniview products are supplied at trade prices to approved trade customers, so the price is shown once you are logged in to a trade account. Call 01902 902251 or see our trade customer page to open an account.
Delivery is within 1–3 working days to England, Scotland and Wales. We do not ship to Northern Ireland.
Yes. Our trade counter is at Unit 3, Park View Centre, 243 Dudley Road, Wolverhampton WV2 3JU. Call first so we can confirm the item is there for you.
Questions on specification or compatibility: call 01902 902251, see our FAQ and support pages, or contact us. Trade accounts are available — see trade customers. Browse the full Uniview range.
| Product Code | NSW3000-25GT1GP1GC-IN |
|---|---|
| Manufacturer | Uniview |
| Colour | Black |
| Device Port Speed | 10/100/1000 Mbps |
| Device Ports | 24 |
| Managed | Yes |
| PoE Ports | 0 |
| Uplink Port Speed | 10/100/1000 Mbps |
| Uplink Ports | 2 |
We provide tailored support for you and your CCTV system.
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
As cheap as £10, we will deliver your order 3 to 5 working days!
