UNIVIEW - NSW2020-8T2GT-LPOE-IN - Unmanaged Ethernet PoE Switch, 8 PoE Ports, 2 Gigabit

NSW2020-8T2GT-LPOE-IN — Unmanaged Ethernet PoE Switch, 8 PoE Ports, 2 Gigabit

The Uniview NSW2020-8T2GT-LPOE-IN is an unmanaged Ethernet PoE switch with eight 10/100Mbps PoE ports and two 10/100/1000Mbps ports. It supplies up to 65W of PoE in total and up to 30W on a single port.

What the NSW2020-8T2GT-LPOE-IN is for

The NSW2020-8T2GT-LPOE-IN suits a small set of PoE IP cameras where a switch with eight PoE ports and two faster ports is enough. The eight PoE ports run at 10/100Mbps and the two other ports at 10/100/1000Mbps; only the eight are listed as PoE.

The 65W budget is the limit that matters. Eight ports could not all deliver the 30W single-port maximum at once, so add up the actual draw of your cameras. IEEE 802.3af and 802.3at are listed, in PoE mode A (1236) and mode B (4578).

Default mode lets all ports communicate with each other. Extend (surveillance) mode gives transmission distance up to 250 metres, with downlink ports communicating only with uplink ports. The body is 169 x 132 x 40mm and has no cooling fan.

Key features

• Eight 10/100Mbps PoE ports (RJ45) and two 10/100/1000Mbps ports
• PoE budget of 65W in total, with up to 30W on a single port
• PoE standards IEEE 802.3af and 802.3at, in PoE mode A and mode B
• Switching capacity of 5.6 Gbps and forwarding performance of 4.17Mpps
• Compact 169 x 132 x 40mm body weighing 0.67KG, with no cooling fan
• Uniview lists NDAA compliance for this model

Full specification

What you will need

You need a mains supply (AC 100 to 240V, 50/60Hz), network cable to each device and PoE cameras whose combined draw stays within 65W. Use one of the 10/100/1000Mbps ports to link to your recorder or network. Tell us your camera models and we will check the power total. See our PoE switches, NVRs and network cable.

Buying from Zenith Security Co.

We are a supplier, not an installer. We will go through the NSW2020-8T2GT-LPOE-IN with you before you buy — how many PoE cameras fit the 65W budget and which port to use for the recorder link — and depending on your requirements and your area we can recommend a qualified trade installer. We have been operating since 2012 and you can visit our trade counter in Wolverhampton.

How much PoE power does the Uniview NSW2020-8T2GT-LPOE-IN supply?

Up to 65W in total and up to 30W on a single port. Eight cameras would need to average about 8W each to stay inside the total, so check your devices.

Which ports on the NSW2020-8T2GT-LPOE-IN are gigabit?

The two 10/100/1000Mbps ports. The eight PoE ports are 10/100Mbps.

Does the NSW2020-8T2GT-LPOE-IN need a separate PoE injector?

No, its eight PoE ports supply power to PoE devices directly, within the 65W budget. The switch itself runs from AC 100 to 240V mains.

Is the NSW2020-8T2GT-LPOE-IN managed?

Uniview's datasheet title calls it an unmanaged Ethernet PoE switch.

Is this a trade-price product?

Yes. Uniview products are supplied at trade prices to approved trade customers, so the price is shown once you are logged in to a trade account. Call 01902 902251 or see our trade customer page to open an account.

How quickly can I get it?

Delivery is within 1–3 working days to England, Scotland and Wales. We do not ship to Northern Ireland.

Can I collect or see one before buying?

Yes. Our trade counter is at Unit 3, Park View Centre, 243 Dudley Road, Wolverhampton WV2 3JU. Call first so we can confirm the item is there for you.

Questions on specification or compatibility: call 01902 902251, see our FAQ and support pages, or contact us. Trade accounts are available — see trade customers. Browse the full Uniview range.