HiLook by Hikvision upto 8MP Full HD 4Ch IP Kit with 4 x 4MP IP Turret Cameras

Main Camera Features:

• 1/2.7" progressive scan CMOS
• 2560 × 1920@15fps
• 2.8 mm/4 mm/6 mm fixed lens
• H.265+, H.265, H.264+, H.264
• Dual stream
• 3D DNR (Digital Noise Reduction)
• Up to 30 m IR range
• PoE (Power over Ethernet)
• IP67

NVR Features

• Internet & Smart Phone compatible

• Video Input and Transmission

• Video Input and Transmission
• l Connectable to the third-party network cameras
• l Up to 8 network cameras can be connected
• Compression and Recording
• l H.265+/H.265 compression effectively reduces the storage space and costs
• l Full channel recording at up to 4 MP resolution
• HD Video Output
• l HDMI/VGA output at 1080p resolution
• Storage and Playback
• l 1-ch playback at 4 MP resolution or 2-ch at 1080p resolution  
• l 1 SATA hard disk can be connected with 6TB capacity
• Smart Function
• l Supports line crossing and intrusion detection
• l Smart search for the selected area in the video; and smart playback to improve the playback efficiency
• l One-key operation: automatically search, modify and add IP cameras after device is activated
• Network & Ethernet Access
• l HiLookVision or Hik-Connect for easy network management
• l 100 Mbps Ethernet network interface
• l 4/8 independent 100 Mbps built-in switch network interfaces

Who is this 4MP IP kit for?

The kit we recommend for most homes and small businesses: a 4K-capable PoE NVR with 4MP turret cameras. 4MP records roughly twice the detail of 1080p — enough to read a number plate at the end of a drive or recognise a face across a shop — and the NVR records up to 8MP per channel, so cameras added later won’t be held back. One Cat5e/Cat6 cable per camera; everything viewed on the HiLookVision or Hik-Connect app. Choose the camera count for the positions you need to cover — 4-channel kits take up to four cameras, 8-channel kits up to eight; buy 8-channel if there’s any chance you’ll add more. Night vision is 30m infrared. For colour at night, swap in or add ColorVu 3.0 turrets; for the budget option, the 2MP IP kits.

What you’ll need with it

• A surveillance-grade hard drive — choose one from the options and we fit and format it; 2TB for four cameras, 4TB for eight.
• Cat5e/Cat6 cable to each camera position (up to 100m per run) and a network cable from the NVR to your router.
• An HDMI screen for setup.

Frequently asked questions

Can I mix in ColorVu or 8MP cameras later?

Yes — the NVR records up to 8MP per channel, so any HiLook or Hikvision IP camera can be added up to the channel count.

Is there a monthly fee?

No — recording is local and the app is free.

Do I need a PoE switch?

Not unless cameras are more than 100m from the NVR or you exceed its ports — the NVR powers the kit cameras directly.

Further reading: Which HiLook NVR do I need? · Turret vs bullet vs dome · HiLook ColorVu 3.0 explained