A 24-port 1G SFP Layer 3 core or aggregation switch with eight 1G/10G SFP+ ports; ports 1 to 8 are combo ports that share their slot with an RJ45 port. Most ports need SFP or SFP+ modules, and at least one RG-PA150IB-F power module is needed.
The RG-CS85-24SFP/8GT8XS-D is a Layer 3 switch that Ruijie position as an aggregation switch for large-sized networks, or a core switch for small and medium-sized networks. It has 24 gigabit SFP ports (eight are RJ45 combo ports), eight 1G/10G SFP+ ports, an expansion slot and two power module slots.
Ruijie describe the RG-CS85-24SFP/8GT8XS-D as an aggregation switch for large-sized networks, or a core switch for small and medium-sized networks. It is built around SFP rather than copper: 24 x 1G SFP ports, of which ports 1 to 8 are 10/100/1000BASE-T combo ports. Each combo port shares its slot with an RJ45 port, so on those ports you use either the SFP or the RJ45, not both.
Ports 1 to 16 also run at 100 Mbps, while ports 17 to 24 do not. Eight more 1G/10G SFP+ ports, which Ruijie list as its 10GE uplinks, sit alongside them, and the expansion slot takes the CM85-4XS2CQ module with 4 x 1G/10G SFP+ and 2 x 40G/100G QSFP28 ports. Switching capacity is 688 Gbps at 512 Mpps.
As a Layer 3 switch it holds up to 24,000 IPv4 and 14,000 IPv6 unicast routes and 64,000 MAC address entries, and VSU supports up to 4 members. Two power module slots take RG-PA150IB-F modules, with 1+1 redundancy when both are fitted.
| Fixed service port | 24 x 1GE SFP ports (ports 1 to 8 are 10/100/1000BASE-T combo ports that share their slot with an RJ45 port; ports 1 to 16 support 100 Mbps, ports 17 to 24 do not); 8 x 1GE/10GE SFP+ ports |
| Module slot | 1 x expansion module slot; 2 x power module slots |
| Compatible expansion module | CM85-4XS2CQ |
| Compatible power module | RG-PA150IB-F |
| Ports on CM85-4XS2CQ expansion module (when fitted) | CM85-4XS2CQ: 4 x 1GE/10GE SFP+ ports; 2 x 40GE/100GE QSFP28 ports |
| Fixed management port | 1 x RJ45 console port; 1 x RJ45 MGMT port |
| USB | 1 x USB 3.0 port |
| Packet forwarding rate | 512 Mpps |
| Switching capacity | 688 Gbps |
| CPU | Dual-core CPU, each core with the clock speed of 1.2 GHz |
| Real-time clock (RTC) | Supported |
| BootROM | 16 MB (2 flash chips for 1+1 boot redundancy) |
| Flash Memory | 4 GB |
| Memory | 1 GB |
| Switch buffer | 4 MB |
| MAC address table size | 64,000 |
| ARP table size | 24,000 |
| Number of IPv4 unicast routes | 24,000 |
| Number of IPv4 multicast routes | 4,000 |
| Number of IPv6 unicast routes | 14,000 |
| Number of IPv6 multicast routes | 2,000 |
| Number of ACEs | Ingress: 7,000; Egress:1,500 |
| Number of VSU members | 4 |
| Unit dimensions (W x D x H) | 440 mm x 340 mm x 44 mm (17.32 in. x 13.39 in. x 1.73 in.) |
| Shipping dimensions (W x D x H) | 593 mm x 497 mm x 192 mm (23.35 in. x 14.57 in. x 7.56 in.) |
| Rack height | 1 RU |
| Unit weight | 4.4 kg (9.70 lbs) |
| Shipping weight | 6.20 kg (13.67 lbs) |
| Power supply | 2 x pluggable power module slots; power modules are not built in - purchase at least one RG-PA150IB-F separately |
| Power module redundancy | 1+1 power redundancy |
| Power module hot swapping | Supported |
| Power input | RG-PA150IB-F (AC input): Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz; Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz; Maximum input current: 3 A |
| Maximum output power | RG-PA150IB-F: 150 W |
| Maximum power consumption | 77 W (excluding expansion modules); 102 W (including expansion modules) |
| Temperature | Operating temperature: 0°C to 45°C (32°F to 113°F); Storage temperature: –40°C to +70°C (–40°F to +158°F) |
| Humidity | Operating humidity: 10% to 90% RH (non-condensing); Storage humidity: 5% to 95% RH (non-condensing) |
| Altitude | Operating altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.); Storage altitude: 0 m to 5,000 m (0 ft. to 16,404.20 ft.) |
| Mean time between failure (MTBF) | 823,000 hours (about 94 years) |
| Fan | 3 x fixed fan modules |
| Heat dissipation | Fan cooling, left-to-right airflow |
| Acoustic noise | 45°C (113°F): 56.2 dB |
| USB hot swapping | Supported |
| Cable hot swapping | Supported |
| Power supply monitoring | Monitoring of power supply model and status; Power supply failure alarming |
| Fan monitoring | Fan speed adjustment: 3 levels; Fan failure alarming |
| Temperature monitoring | Temperature monitoring, over-temperature alarming |
| ESD | ESD Contact/Air Discharge: 6kV/8kV; ESD Susceptibility Contact/Air Discharge: 8 kV/15kV |
| Surge protection | MGMT port: 4 kV; Service port: 10 kV; Power port: common mode 6 kV, differential mode 6 kV |
| Conformal coating | Protects circuits against moisture, salt spray, mold, electrical shock and leakage, and so on |
The table shows the hardware specification. Ruijie publish the full software feature list on the datasheet; ask us if you need a particular protocol or feature confirmed.
At least one RG-PA150IB-F power module, because Ruijie's ordering line says to purchase at least one; fit a second for 1+1 redundancy. Apart from the eight combo ports, which can use an RJ45 cable, every port needs an SFP or SFP+ module or cable, so plan the modules you need. A 1G SFP module will not run at 10G in an SFP+ port. Tell us the switches at the other end and we will check the modules.
We are a supplier, not an installer. We will go through the RG-CS85-24SFP/8GT8XS-D with you before you buy — how the combo ports and SFP modules will work in your setup, plus the power modules and uplinks — and depending on your requirements and your area we can recommend a qualified trade installer. We have been operating since 2012 and you can visit our trade counter in Wolverhampton.
Ports 1 to 8 are 10/100/1000BASE-T combo ports, so up to eight ports can be used with RJ45 cable. Each shares its slot with an SFP port, so on each one you use the RJ45 or the SFP, not both. The fixed ports total 32 (24 SFP plus 8 SFP+), not 40.
No. Ruijie state that ports 1 to 16 support 100 Mbps and ports 17 to 24 do not. All 24 are 1GE SFP ports.
Ruijie's ordering information says to purchase at least one RG-PA150IB-F module, so treat it as a separate item. The switch has two power module slots, and fitting both gives 1+1 redundancy. Ask us to confirm what comes with the switch before you order.
Its eight fixed SFP+ ports are listed as 1GE/10GE, so the module fitted sets the speed. A 1G SFP module will not run at 10G. Tell us the switch model at the other end and we will check the module.
Ruijie's RG-CS85 series includes the RG-CS85-24GT8XS-D with 24 RJ45 ports and the RG-CS85-48GT4XS-D with 48 RJ45 ports, both with SFP+ uplinks.
Delivery is within 1–3 working days to England, Scotland and Wales. We do not ship to Northern Ireland.
Yes. Our trade counter is at Unit 3, Park View Centre, 243 Dudley Road, Wolverhampton WV2 3JU. Call first so we can confirm the item is there for you.
Questions on specification or compatibility: call 01902 902251, see our FAQ and support pages, or contact us. Trade accounts are available — see trade customers. Browse the full Ruijie Reyee range.
| Product Code | RG-CS85-24SFP/8GT8XS-D |
|---|---|
| Dimensions | 440 mm x 340 mm x 44 mm |
| Manufacturer | Ruijie Reyee |
| Colour | Black |
| Connection Type | Wired |
| Managed | Yes |
We provide tailored support for you and your CCTV system.
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
As cheap as £10, we will deliver your order 3 to 5 working days!
