7-inch touch-screen indoor station for Hikvision's second-generation (Y-series) 2-wire IP video intercom. Runs over a single non-polarised two-core cable from the distributor — power and signal together — so it suits retrofits where the old intercom wiring is already in the wall. Adds Wi-Fi for app forwarding and local network access.
The DS-KH6320Y-WTE2 is the indoor monitor for Hikvision's Y-series 2-wire IP video intercom. Same 7-inch capacitive touch screen and two-way audio as the network-cabled KH6320 stations, but instead of an Ethernet run to each flat it connects to the system over a single two-core cable from a DS-KAD704Y or DS-KAD706Y distributor, which also supplies its power. A built-in Wi-Fi radio gives it a route onto the local network for Hik-Connect app forwarding.
Most older blocks and houses already have a two-core intercom cable in the wall. A 2-wire system reuses it. The door station and each indoor station connect to the distributor over that existing pair — no polarity to worry about, no Cat5 to pull, no PoE switch on the landing. For a refurbishment or a straight swap from an ageing analogue intercom, that is the difference between a half-day job and a rewire.
If the building does have structured network cabling, the standard IP stations are the simpler choice: see the wired DS-KH6320-TE1 or the Wi-Fi DS-KH6320-WTE1.
When the door station is pressed the screen wakes with live video and the call rings through the built-in speaker. The resident talks to the visitor, sees them on the 7-inch panel and releases the door with one press on screen. Missed calls leave a snapshot. Between calls the same screen can show up to 16 network cameras — a communal entrance or car-park camera, for instance — without a separate monitor.
Unlike the Ethernet KH6320 models, this unit carries its own relays: two lock relays (30 VDC, 0.3 A) and two alarm relay outputs, alongside eight alarm inputs and an RS-485 port. That lets the indoor station itself drive a local door strike or trigger a sounder, and take door contacts, PIRs or a panic button as inputs — useful where a flat door or internal door needs control from the handset rather than from the entrance panel.
| Display | |
|---|---|
| Screen | 7-inch colour TFT LCD, capacitive touch |
| Resolution | 1024 x 600 |
| Audio | |
| Microphone / speaker | Built-in omnidirectional microphone and loudspeaker |
| Audio compression | G.711 U, G.711 A, G.722.1 at 64 Kbps |
| Audio quality | Noise suppression and echo cancellation; adjustable volume |
| Connectivity | |
| 2-wire IP interface | 1 (to DS-KAD704Y / DS-KAD706Y distributor) |
| Wi-Fi | IEEE 802.11 b/g/n |
| Serial | 1 x RS-485 |
| Protocols | TCP/IP, SIP, RTSP |
| Bluetooth / cellular | None |
| Inputs and outputs | |
| Alarm inputs | 8 |
| Alarm outputs | 2 relays (30 V max) |
| Lock control | 2 relays, 30 VDC 0.3 A max |
| Local storage | TF (microSD) card, up to 128 GB (SD 2.0 or lower) |
| Capacity | |
| Door stations | Up to 17 |
| Indoor extensions | Up to 16 |
| Network cameras | Up to 16 |
| Records | 200 notices; 200 pictures and 200 alarm records with TF card |
| General | |
| Power | From the 2-wire bus via DS-KAD704Y / DS-KAD706Y distributor |
| Consumption | ≤ 4 W |
| Operating conditions | Indoor; -10 °C to 50 °C; 10–90% RH non-condensing |
| Mounting | Surface mount |
| Dimensions (W x H x D) | 200 x 140 x 23.6 mm |
| System | Embedded Linux; 128 MB RAM, 32 MB ROM; 35+ interface languages including English |
| Model | DS-KH6320Y-WTE2 |
The Y-series is Hikvision's current 2-wire generation and its stations, door panels and distributors are designed to be used together. We also stock the earlier 2-wire range — the DS-KD8003-IME2 door station and DS-KAD706 distributor — so if you are extending an existing 2-wire system, tell us which generation is installed and we will confirm what fits.
No. It connects and is powered over a single two-core cable from the distributor. The Wi-Fi is an extra for app forwarding and network access, not the main link.
The WTE1 is the standard IP version: Ethernet or Wi-Fi to the network, powered by PoE or 12 V. This Y-WTE2 is the 2-wire version, powered from the distributor, and adds two lock relays, two alarm outputs and an RS-485 port that the WTE1 does not have.
Yes — from the screen during a call via the door station, and it also has two lock relays of its own for a local door.
Yes. With the Wi-Fi connected to the site router, calls can be forwarded to the Hik-Connect app so a resident can answer from a phone.
Up to 17 door stations and 16 network cameras, with 16 indoor extensions ringing together.
Zenith Security Co is an authorised Hikvision partner supplying genuine UK-specification stock. Prices shown are for trade account holders — contact us for account terms and stock, call 01902 902251, or collect from our Wolverhampton trade counter. Read our Hikvision video intercom buying guide, browse all intercoms, the wider access control range, or the full Hikvision range.
| Product Code | DS-KH6320Y-WTE2 |
|---|---|
| Manufacturer | Hikvision |
| Audio I/O | Built-in omnidirectional microphone and loudspeaker; G.711 U/A, G.722.1 |
| Alarm I/O | 8 alarm inputs; 2 relay outputs (30 V max); 2 lock relays (30 VDC, 0.3 A) |
| Interface | 1 x 2-wire IP interface; 1 x RS-485; Wi-Fi 802.11 b/g/n |
| Power | Powered over the 2-wire bus from a DS-KAD704Y / DS-KAD706Y distributor; ≤4 W |
| Operating Temperature | -10 °C to 50 °C |
| Humidity | 10% to 90% RH, non-condensing |
We provide tailored support for you and your CCTV system.
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
As cheap as £10, orders placed before 2:30pm are dispatched for delivery within 1–2 working days!
