Main unit of Hikvision's 2-wire IP (Y series) modular door station. 2 MP camera with a 146° horizontal view, H.265 video, IR to 3 m and WDR; two-way audio with echo cancellation; one call button, expandable with sub-modules over RS-485. Two lock relays, four alarm inputs, IP65, -40 °C to 60 °C. Powered over the two-wire bus from a DS-KAD706Y distributor.
The DS-KD8003Y-IME2 is the Y-series version of Hikvision's best-known modular door station. It keeps the 2 MP wide-angle camera, IR illumination, two-way audio and modular expansion of the IP original, but connects over a single two-core cable and is powered by a DS-KAD706Y (or KAD704Y) distributor — so an existing intercom cable can carry a modern IP door entry system.
Hikvision's current 2-wire range comes in two families that use different buses: the 2-wire IP (Y) series and the 2-wire HD (EY) series. Distributors, door stations and indoor stations are designed to be used within their own family. If you are extending an existing 2-wire system, tell us what is installed and we will confirm what fits.
A 146° horizontal field of view is wide even by door-station standards: it covers a visitor standing well to one side and the ground in front of the door. WDR handles backlighting, the IR light reaches 3 m after dark, and video is encoded in H.265, H.264 or MJPEG. The microphone and speaker are built in with noise suppression and echo cancellation, and the audio codec list (G.711, Opus, AAC-LD/LC, G.726, G.722.1) means clean sound to the indoor station and to the Hik-Connect app.
Two lock relays, each rated to 30 VDC 2 A, so the panel can control two doors or a door and a gate. Four alarm inputs are pre-assigned as two exit buttons and two door contacts, and a tamper switch reports removal. One RS-485 port carries Hikvision sub-modules — extra call buttons, a keypad, a card reader — off the single call button on the main unit.
Up to 500 linked indoor stations, 16 sub door stations and 2000 users cover a substantial block. Protocols are TCP/IP, RTSP, IPv6 and ONVIF, so the door camera can also be pulled into an NVR or VMS. The platform is embedded Linux with 256 MB RAM and 32 MB ROM and a 36-language interface.
IP65 rated, -40 °C to 60 °C, surface or flush mounting, 100 × 98 × 42 mm, and only ≤ 4 W drawn from the bus. There is no separate network port and no Wi-Fi: the two-wire interface carries everything.
We also list the original DS-KD8003-IME2. The Y marks the current 2-wire IP generation, matched to the DS-KAD706Y distributor and DS-KH6320Y indoor stations. If you are adding to an installed system, tell us which generation you have.
| Camera and video | |
|---|---|
| Camera | 2 MP, 1 lens |
| Field of view | Horizontal 146°, vertical 82° |
| WDR | Supported |
| Supplement light | IR light, up to 3 m |
| Video compression | H.264, H.265, MJPEG |
| Audio | |
| Audio | 1 built-in omnidirectional microphone, 1 built-in loudspeaker; G.711 U/A, Opus, AAC-LD, AAC-LC, G.726, G.722.1 at 64 Kbps; noise suppression and echo cancellation |
| Capacity | |
| User capacity | 2000 |
| Linked indoor stations | 500 |
| Sub door stations | 16 |
| Network | |
| Network protocols | TCP/IP, RTSP, IPv6, ONVIF |
| Two-wire IP interface | 1 |
| Interfaces | |
| Alarm inputs | 4 (2 exit buttons and 2 door contacts by default) |
| Tamper | 1 |
| Exit buttons | 2 (for lock control) |
| Door contact inputs | 2 |
| RS-485 | 1 (Hikvision sub-module communication) |
| Lock control | 2 relays, max 30 VDC, 2 A |
| Button | 1 |
| General | |
| Power | Powered by KAD704Y or KAD706Y series distributor |
| Power consumption | ≤ 4 W |
| Installation | Surface or flush mounting |
| Protection | IP65 |
| Working temperature | -40 °C to 60 °C |
| Working humidity | 10% to 90% |
| Dimensions (W × H × D) | 100 × 98 × 42 mm |
| System | Embedded Linux; 32 MB ROM, 256 MB RAM |
| Application | Outdoor |
| Model | DS-KD8003Y-IME2 |
Hikvision also offers a Y-series villa kit, the DS-KIS702Y — ask us for availability.
A KAD704Y or KAD706Y series distributor, per the datasheet — we list the DS-KAD706Y. It draws ≤ 4 W.
No. The DS-KD7003EY-IME2 is the 2-wire HD (EY series) door station on a 48 V bus. This DS-KD8003Y-IME2 is 2-wire IP (Y series). They use different distributors.
Yes — two lock relays, each rated to 30 VDC, 2 A.
Yes. The main unit has one button; additional buttons, a keypad or a card reader are added as Hikvision sub-modules over the RS-485 port.
The Y-series joins the IP network through the DS-KAD706Y's RJ45 port, which is what enables Hik-Connect app forwarding for the system.
Zenith Security Co is an authorised Hikvision partner supplying genuine UK-specification stock. Prices shown are for trade account holders — contact us for account terms and stock, call 01902 902251, or collect from our Wolverhampton trade counter. Browse all intercoms, the wider access control range, or the full Hikvision range.
| Product Code | DS-KD8003Y-IME2 |
|---|---|
| Manufacturer | Hikvision |
| Video Compression | H.264, H.265, MJPEG |
| Audio I/O | Built-in microphone and loudspeaker; G.711 U/A, Opus, AAC-LD, AAC-LC, G.726, G.722.1 |
| Alarm I/O | 4 alarm inputs (2 exit buttons, 2 door contacts); tamper |
| Interface | 1 two-wire IP interface; 1 × RS-485 |
| Protection Level, Ingress Protection | IP65 |
| Power | Powered by KAD704Y or KAD706Y series distributor; ≤ 4 W |
| Operating Temperature | -40 °C to 60 °C |
| Humidity | 10% to 90% |
We provide tailored support for you and your CCTV system.
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
As cheap as £10, we will deliver your order 3 to 5 working days!
