Fike 17-0144 - SRM to UVO/DIVA Solenoid Lead with EOL Assembly

Fike 17-0144 SRM to UVO/DIVA Solenoid Lead with EOL Assembly

The Fike 17-0144 is the pre-terminated lead and end-of-line (EOL) circuit supervision assembly fitted between a Twinflex SRM solenoid releasing module and the solenoid coil of the valve actuator, such as a Fike UVO (universal valve operator) or DIVA. It is part of Fike's Twinflex SRP extinguishing release system.

Fike's SRM installation instructions call for this assembly on the SRM's solenoid output, whether the module drives a single 24 V solenoid or two 12 V solenoids. It lets the SRM watch the solenoid wiring for open and short circuit faults and report them to the SRP panel. The cable run between the solenoid and the SRM must be no longer than 3 metres.

Key features

• Genuine Fike EOL circuit supervision assembly for the Twinflex SRM
• Fits between the SRM solenoid output and the solenoid coil
• Monitors the solenoid wiring for open and short circuit faults
• Used on 12 V and 24 V solenoid connections
• Maximum solenoid to SRM cable length of 3 m

Specifications

Compatible with

• Fike 100-0010 Twinflex SRM solenoid releasing module
• Fike 100-0001 Twinflex SRP releasing panel

Fike advises that the solenoid valve is not fitted to the container while the SRM circuits are being wired and set up, to prevent an accidental discharge.

Fire alarm systems should be designed, installed and commissioned by a competent person.