HIKVISION - DS-K7P03A - Touchless Exit Button, Stainless Steel Panel, NO/NC/COM, 12–24 VDC

Hikvision DS-K7P03A — touchless stainless-steel exit button

The DS-K7P03A is the exit button for doors where people should not have to touch anything — clinics, food production, clean areas, and any office that has kept its no-contact habits. A wave releases the lock through a NO/NC/COM contact wired to the controller's exit-button input or straight into the lock circuit of a maglock such as the DS-K4H250S. The plate is stainless steel at the standard 86 × 86 mm UK/EU size and only 25 mm deep, so it fits a narrow frame. Hikvision quotes a one-million-operation test.

Operation and output

Touchless triggering with a NO / NC / COM relay contact, so it can pull a controller's request-to-exit input low or break a fail-safe lock's supply directly. Power 12 to 24 VDC at 1 A.

Build and rating

Stainless-steel front panel, 86 × 86 × 25 mm, for all kinds of narrow door frames; passed a 1,000,000-cycle ageing test. -20 °C to 50 °C, 0–95% humidity non-condensing.

DS-K7P03A technical specification

What you'll need with it

• 12–24 VDC from the access-control supply
• A controller exit input (DS-K2702X / MinMoe terminal) or the lock circuit of a DS-K4H250S
• A back box or surface mounting to suit the 86 × 86 mm plate

Frequently asked questions

How does the DS-K7P03A work?

It senses a hand waved in front of the plate and switches its NO/NC/COM contact — no physical press.

Can it wire directly to a maglock?

Yes — the contact can break a fail-safe lock's supply, or drive a controller's exit-button input.

What voltage?

12 to 24 VDC at 1 A.

Is it weatherproof?

The datasheet gives an operating range of -20 °C to 50 °C and 0–95% humidity but no IP rating; use it indoors or under cover.

Does it fit a standard back box?

The plate is 86 × 86 mm — the standard single-gang size — 25 mm deep, designed for narrow frames.

Trade pricing

Zenith Security Co is an authorised Hikvision partner supplying genuine UK-specification stock. Prices shown are for trade account holders — contact us for account terms and stock, call 01902 902251, or collect from our Wolverhampton trade counter. Browse all intercoms, the wider access control range, or the full Hikvision range.

Hikvision Authorised Distributor: Zenith Security Co is verified by Hikvision UK as an Authorised Distributor/Wholesaler (check us with the "Verify a Wholesaler" tool on Hikvision UK's wholesaler page), so this is genuine UK-supplied Hikvision equipment. See our full Hikvision range.