Hikvision DS-PDEB2-EG2-WE — AX PRO wireless two-button emergency button, IP66
The DS-PDEB2-EG2-WE is the fixed panic button for an AX PRO wireless alarm. Screwed to the wall beside a bed, a bath or a shop counter, a press raises an emergency alarm on the hub and, through Hik-Connect, on the phones of everyone monitoring the system. Its IP66 rating is unusual for a panic button and is what allows it in a bathroom or a care-home wet room. Hikvision's specification lists two buttons; how they are assigned is set in the AX PRO hub's configuration — ask us for the options on your hub firmware. It enrols by QR code and runs up to three years on a coin cell.
Hikvision's AX PRO wireless peripherals use the Tri-X 868 MHz two-way radio and enrol to an AX PRO hub; wired detectors connect to any panel zone input. This item sits in our Hikvision AX PRO range.
Radio
Hikvision Tri-X two-way RF on 868 MHz with AES-128 encryption and frequency hopping; 1.2 km range in free space. Enrolment by power-up, remote ID or QR code. Environment-temperature and signal-strength indications help placement and maintenance.
Battery and rating
One CR2450 3 V cell with a standby life of up to three years. IP66 sealing; -10 °C to 55 °C, 10–90% humidity; listed for indoor and especially humid environments. Front and rear tamper protection.
Size and mounting
63.8 × 63.8 × 19 mm, wall mounted — small enough for a bedside or bathroom position.
DS-PDEB2-EG2-WE technical specification
| Detection |
| Button | 2 |
| Tamper Protection | Front;Rear |
| Environment Temperature Indicator | Support |
| Signal Strength Indicator | Support |
| Transmission & interface |
| Transmission Method | Two-Way RF Wireless |
| Transmission Technology | Tri-X Wireless |
| Transmission Frequency | 868MHz |
| Transmission Security | AES-128 Encryption |
| Transmission Range(Free Space) | 1.2Km |
| Frequency Hopping | Support |
| Enrolling Method | Power up;Remote ID;QR Code |
| LED Indicator | Blue (alarm) |
| Electrical |
| Power Supply | Battery powered |
| Typical Voltage | 3V |
| Standard Battery Life | Up to 3 years (standby time) |
| Battery Type | CR2450 x 1 |
| General |
| Operation Temperature | -10°C to 55°C (14°F to 131°F) |
| Storage Temperature | -20°C to 60°C (-4°F to 140°F) |
| Operation Humidity | 10% to 90% |
| IP Rate | IP66 |
| Dimension(WxHxD) | 63.8 mm × 63.8 mm × 19 mm |
| Mounting Method | Wall |
| Application Scenario | Indoor, Humid environment especially |
| Model | DS-PDEB2-EG2-WE(B) |
What you'll need with it
- An AX PRO hub (Tri-X 868 MHz)
- Wall fixings; a replacement CR2450 in due course
Frequently asked questions
Can the DS-PDEB2-EG2-WE go in a bathroom?
Yes — IP66 and listed for humid environments.
What do the two buttons do?
Hikvision's specification lists the button count only; their assignment is set in the AX PRO hub's configuration — ask us for the options on your hub firmware.
How long does the battery last?
Up to three years standby on one CR2450.
What is the range?
1.2 km in free space on Tri-X 868 MHz; indoors depends on construction.
Which hubs does it work with?
Hikvision AX PRO hubs using the Tri-X 868 MHz radio.
Trade pricing
Zenith Security Co is an authorised Hikvision partner supplying genuine UK-specification stock. Prices shown are for trade account holders — contact us for account terms and stock, call 01902 902251, or collect from our Wolverhampton trade counter. Browse our Hikvision AX PRO range, the wider intruder alarm range, or the full Hikvision range.