TP-LINK OMADA - ES210GP - 10-Port Gigabit Easy Managed Switch with 8-Port PoE+, 63W

ES210GP — TP-Link Omada 10-Port Gigabit Easy Managed Switch with 8-Port PoE+, 63W

The TP-Link Omada ES210GP is an easy managed switch with 10 Gigabit RJ45 ports, 8 of them PoE (63 W budget), plus one Gigabit SFP/RJ45 combo port, in a desktop steel case that can also be wall mounted. It can be set up on its own through a web interface or adopted into an Omada SDN controller for central management.

What the ES210GP is for

The ES210GP is a PoE switch for powering and connecting IP cameras, Wi-Fi access points and VoIP phones over a single network cable. TP-Link list a PoE budget of 63 W shared across its 8 PoE ports, using 802.3af/at PoE+, with up to 30 W on any one port.

For CCTV, a typical fixed IP camera draws around 7 W or less, so the ES210GP can power roughly 8 cameras at once (check each camera's datasheet; PTZ and heated cameras draw more). TP-Link's Extend Mode allows PoE and data up to 250 m on the supported ports, at reduced speed, for cameras beyond the normal 100 m limit. For larger runs, see our full range of network switches.

Key features

• 10 Gigabit RJ45 ports, 8 of them PoE (63 W budget), plus one Gigabit SFP/RJ45 combo port
• 802.3af/at PoE+ with a 63 W total budget and up to 30 W per port
• Easy managed: VLAN, IGMP snooping, QoS, link aggregation, port mirroring and loop prevention
• Central management, Omada app and cloud access when adopted by an Omada controller
• PoE Auto Recovery restarts unresponsive powered devices
• Fast PoE and Perpetual PoE keep devices powered through switch reboots
• 20 Gbps switching capacity

Full specification

What you will need

You need network cable for each device. Total PoE draw of all connected devices must stay within the 63 W budget. SFP modules for fibre uplinks are sold separately. For central management you need an Omada controller (hardware, software or cloud-based); it is not needed for standalone use.

Buying from Zenith Security Co.

We are a supplier, not an installer. We will go through the ES210GP with you before you buy — the port count and speed against your devices and the PoE budget against your cameras or access points — and depending on your requirements and your area we can recommend a qualified trade installer. We have been operating since 2012 and you can visit our trade counter in Wolverhampton.

What is the PoE budget of the ES210GP and how many IP cameras can it power?

TP-Link list a 63 W PoE budget across 8 PoE ports, up to 30 W per port. At around 7 W per typical fixed IP camera that is roughly 8 cameras; higher-draw PTZ or heated cameras reduce that number.

Which PoE standard does the ES210GP support?

The PoE ports are 802.3af/at compliant, so they power standard PoE (15.4 W) and PoE+ (30 W) devices. They will not power 24 V passive PoE devices.

Is the ES210GP managed or unmanaged?

It is an easy managed (smart) switch. It works out of the box, and through its web interface you can set VLANs, QoS, IGMP snooping, link aggregation and port mirroring. It sits between an unmanaged switch and TP-Link's fully managed Omada SG range.

Is the ES210GP Omada compatible and does it need a controller?

Yes, it is part of the TP-Link Omada range. It does not need a controller to work, but adopting it into an Omada hardware, software or cloud-based controller adds central management, the Omada app and cloud access alongside your Omada access points and gateways.

Does the ES210GP have SFP or uplink ports?

Yes: one Gigabit SFP/RJ45 combo port.

Can the ES210GP be rack mounted?

No. It is a desktop steel case that can also be wall mounted, not a rack unit.

What is the difference between the ES210GP and the ES210GMP?

The ES210GP has 10 Gigabit RJ45 ports, 8 of them PoE (63 W budget), plus one Gigabit SFP/RJ45 combo port. The ES210GMP has 10 Gigabit RJ45 ports, 8 of them PoE (123 W budget), plus one Gigabit SFP/RJ45 combo port.

How quickly can I get it?

We ship nationally from our multi-million pound warehouse, with orders leaving daily. Orders placed before 2:30pm are normally dispatched for delivery within 1–2 working days to England, Scotland and Wales. You can also collect in store from our trade counter — call first so we can confirm your order is ready. We do not ship to Northern Ireland.

Can I collect or see one before buying?

Yes. Our trade counter is at Unit 3, Park View Centre, 243 Dudley Road, Wolverhampton WV2 3JU. Call first so we can confirm the item is there for you.

Questions on specification or compatibility: call 01902 902251, see our FAQ and support pages, or contact us. Trade accounts are available — see trade customers. Browse the full TP-Link range.

Official TP-Link VAR Partner: Zenith Security Co is listed on TP-Link's UK where-to-buy page as a VAR Partner, so this is genuine UK-supplied TP-Link equipment. See our full TP-Link range.