HIKVISION - DS-KH7300EY-TE2/White - 7" Touch Screen 2-Wire HD Video Intercom Indoor Station, White
Product Features
7-inch touch-screen indoor station for Hikvision's 2-wire HD (EY series) door entry. Answers the door with live video and two-way audio, releases the lock from the screen, and stores call snapshots to microSD. Only 20 mm deep. Powered over the two-wire bus from a DS-KAD7060EY distributor or DS-KAD7061EY splitter — no network cable, no Wi-Fi.
- 7-inch colour TFT capacitive touch screen, 1024 × 600
- Two-way audio with noise suppression and echo cancellation
- Three touch buttons (Answer, Unlock, Hang up); 1 alarm input
- microSD (TF) card slot to 128 GB; 200 call snapshots
- Two-wire in and out ports for daisy-chaining; up to 3 linked extensions
- 190.2 × 138.2 × 20 mm; ≤ 4 W
Hikvision DS-KH7300EY-TE2 — 7-inch 2-wire HD indoor station — white
DS-KH7300EY-TE2/White is the white version of the DS-KH7300EY-TE2. The specification below is Hikvision's datasheet for the DS-KH7300EY-TE2, which the finish does not change. Hikvision publishes one product image for the family, showing the black unit.
The DS-KH7300EY-TE2 is the wired indoor monitor for Hikvision's 2-wire HD (EY series) intercom. A 7-inch capacitive touch screen at 1024 × 600, two-way audio and a microSD slot in a panel just 20 mm deep, fed with power and video over a single two-core cable from the DS-KAD7060EY distributor or a DS-KAD7061EY splitter. It has no Wi-Fi: for a station that also joins the home network, choose the DS-KH7300EY-WTE2.
Hikvision's current 2-wire range comes in two families that use different buses: the 2-wire IP (Y) series and the 2-wire HD (EY) series. Distributors, door stations and indoor stations are designed to be used within their own family. If you are extending an existing 2-wire system, tell us what is installed and we will confirm what fits.
What the resident gets
A press at the door station wakes the screen with live video and rings the built-in speaker. The resident answers with the touch button, talks to the visitor and releases the door with a second touch. Missed calls leave a snapshot — up to 200 on a fitted TF card. Three indicators (power, mute, in use) and a physical reset button complete the front.
Slim, wired, simple
At 190.2 × 138.2 × 20 mm it sits almost flush to the wall on its surface mount. The two-wire interface has an input and an output, so stations in the same flat can be daisy-chained rather than home-run, and up to three indoor extensions can ring together. A single alarm input takes a door contact or panic button. There is also a 12 V DC input on the unit.
Power and consumption
The datasheet specifies power at 48 V from the DS-KAD7060EY distributor or the DS-KAD7061EY splitter, drawing ≤ 4 W in use and ≤ 1 W on standby — the low standby figure matters when several stations share one distributor channel.
TE2 or WTE2?
Same screen, same audio, same bus. The WTE2 adds 2.4 GHz Wi-Fi so the station can reach the router for Hik-Connect app forwarding; this TE2 stays purely on the two-wire bus, which suits blocks where residents' Wi-Fi is not part of the system. The standard-finish unit is listed as the DS-KH7300EY-TE2.
DS-KH7300EY-TE2 technical specification
| Display | |
|---|---|
| Screen | 7-inch colour TFT, capacitive touch |
| Resolution | 1024 × 600 |
| Audio | |
| Audio | 1 built-in omnidirectional microphone, 1 built-in loudspeaker; G.711 U/A at 64 Kbps; noise suppression and echo cancellation; adjustable volume |
| Capacity | |
| Event capacity | 200 captured pictures (with TF card) |
| Linked indoor extensions | 3 |
| Network | |
| Protocols | TCP/IP, RTSP |
| Wired network | 10/100 Mbps self-adaptive through the 2-wire interface |
| Wi-Fi | None |
| Two-wire IP interface | 2 (1 input, 1 output) |
| Interfaces | |
| Alarm input | 1 |
| TF card | Up to 128 GB (SD 2.0 or lower) |
| Power supply input | 12 V DC |
| Buttons | 3 touch buttons (Answer, Unlock, Hang up) + 1 physical reset button |
| Indicators | 3 (Power, Mute, In use) |
| General | |
| Power | 48 V, powered by DS-KAD7060EY or DS-KAD7061EY |
| Power consumption | ≤ 4 W (standby ≤ 1 W) |
| Installation | Surface mounting |
| Working temperature | -10 °C to 50 °C |
| Working humidity | 10% to 90% (non-condensing) |
| Dimensions | 190.2 × 138.2 × 20 mm |
| System | Embedded Linux; 32 MB ROM, 128 MB RAM |
| Application | Indoor |
| Model | DS-KH7300EY-TE2/White(O-STD) |
What you'll need with it
- A DS-KAD7060EY distributor (or a DS-KAD7061EY splitter off one of its channels) to power it
- An EY-series door station — the DS-KD7003EY-IME2
- Two-core cable to the station position
- A microSD card if snapshots are to be kept on the unit
For a single dwelling the DS-KIS704EY kit bundles the EY components together.
Frequently asked questions
What is different about the /White version?
The finish only. It is the same DS-KH7300EY-TE2 indoor station with a white front. Hikvision's model code for it is DS-KH7300EY-TE2/White(O-STD).
Does it need a network cable or Wi-Fi?
Neither. It is powered and connected over the two-wire bus. It has no Wi-Fi radio — the DS-KH7300EY-WTE2 is the Wi-Fi version.
What powers it?
48 V over the two-wire bus from a DS-KAD7060EY distributor or DS-KAD7061EY splitter, per the datasheet. It also has a 12 V DC input. Consumption is ≤ 4 W.
Can it release the door?
Yes — the Unlock touch button releases the lock controlled by the door station.
How many stations can I have in one flat?
Up to three linked indoor extensions; the two-wire in/out ports let them be chained.
Trade pricing
Zenith Security Co is an authorised Hikvision partner supplying genuine UK-specification stock. Prices shown are for trade account holders — contact us for account terms and stock, call 01902 902251, or collect from our Wolverhampton trade counter. Read our Hikvision video intercom buying guide, browse all intercoms, the wider access control range, or the full Hikvision range.
| Product Code | DS-KH7300EY-TE2/White(O-STD) |
|---|---|
| Manufacturer | Hikvision |
| Audio I/O | Built-in omnidirectional microphone and loudspeaker; G.711 U/A |
| Alarm I/O | 1 alarm input |
| Interface | 2 two-wire IP interfaces (1 in, 1 out); 12 V DC input |
| Power | 48 V from DS-KAD7060EY or DS-KAD7061EY; ≤ 4 W (standby ≤ 1 W) |
| Operating Temperature | -10 °C to 50 °C |
| Humidity | 10% to 90% (non-condensing) |
RELATED PRODUCTS
TECHNICAL SUPPORT
We provide tailored support for you and your CCTV system.
3 YEAR WARRANTY
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
COME & VISIT US
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
FREE DELIVERY OVER £ 149.99
As cheap as £10, orders placed before 2:30pm are dispatched for delivery within 1–2 working days!
