HIKVISION - DS-KAD7061EY - 2-Wire HD Indoor Station Splitter, 4 Way, Surface Mount

Hikvision DS-KAD7061EY — 4-way 2-wire HD splitter for indoor stations

The DS-KAD7061EY solves a common 2-wire problem: one channel from the distributor, several handsets wanted in the flat. It splits a single two-wire run into four indoor station connections, with two further cascade ports, in a box small enough (70.6 × 60 × 25 mm) to sit behind a station or in a back box. It draws under 2 W.

Hikvision's current 2-wire range comes in two families that use different buses: the 2-wire IP (Y) series and the 2-wire HD (EY) series. Distributors, door stations and indoor stations are designed to be used within their own family. If you are extending an existing 2-wire system, tell us what is installed and we will confirm what fits.

Typical use

A three-bedroom flat wants a handset in the hall, the kitchen and the main bedroom. Rather than use three distributor channels, one channel from the DS-KAD7060EY comes into the flat, lands on the DS-KAD7061EY, and three short two-wire runs go out to the three DS-KH7300EY-TE2 stations. All three ring on a call and any one can answer and release the door.

Small, passive, surface-mounted

Six indicators show which ports are live. It is surface-mounted and draws almost nothing — the datasheet gives ≤ 2 W — so it adds negligible load to the channel that feeds it. Note the distributor channel rating when planning how many stations sit downstream of one splitter.

DS-KAD7061EY technical specification

What you'll need with it

• A DS-KAD7060EY distributor upstream — the splitter is fed from one of its channels
• EY-series indoor stations — DS-KH7300EY-TE2 or DS-KH7300EY-WTE2
• Two-core cable from the splitter to each station position

Frequently asked questions

How many indoor stations can I hang off one splitter?

Four two-wire interfaces for indoor stations, plus two cascade interfaces for chaining.

Does it need its own power supply?

The datasheet lists no separate power input; consumption is ≤ 2 W. It is fed from the distributor channel.

Can I use it with the 2-wire IP (Y series) stations?

It is an EY (2-wire HD) family part. Keep it with EY distributors and stations.

Where do I mount it?

Surface mounting. At 70.6 × 60 × 25 mm it fits in a back box or behind a station.

Do all the connected stations ring together?

Stations on the same flat channel are extensions of one another — a call rings on all of them and any can answer. Configuration is done on the stations.

Trade pricing

Zenith Security Co is an authorised Hikvision partner supplying genuine UK-specification stock. Prices shown are for trade account holders — contact us for account terms and stock, call 01902 902251, or collect from our Wolverhampton trade counter. Browse all intercoms, the wider access control range, or the full Hikvision range.