Fike 205-0003-B - Sita Multipoint ASD Addressable Detector, Black

Fike 205-0003-B Sita Multipoint ASD Addressable Detector, Black

The Fike 205-0003-B is the black version of the Sita Multipoint ASD addressable detector, supplied with a matching black mounting base for ceilings and interiors where a white detector would stand out. It is used with Fike's CIE-A-200, CIE-A-400, Duonet and Quadnet fire alarm control panels.

One microprocessor-controlled device provides smoke, heat or combined smoke/heat detection. The detection mode is set on a DIL switch in the electronics module or through the commissioning software (or at the panel on Duonet and Quadnet) and can be changed later if the use of a room changes. Each detector has its own loop isolator and local input/output for control and switching. This model has no sounder; the black version with integral sounder is the Fike 205-0001-B.

Key features

• Up to 15 detection settings, as a single mode or a combination
• Built-in loop isolator and local I/O
• Self-calibrates every 6 hours and continuously monitors for dust contamination
• Head removes easily for maintenance at height
• Black mounting base included

Detection modes

• Smoke 1: fast response for high ceilings and free-burning fire risks, where ionisation detectors were traditionally used
• Smoke 2: optical-type setting for smouldering fire risks and escape routes
• Smoke 3: reduced sensitivity with a time delay for areas prone to nuisance alarms, such as hotel bedrooms with en-suite showers
• Heat 1: rate of rise
• Heat 2: standard fixed temperature, approx. 58°C (e.g. kitchens)
• Heat 3: high fixed temperature, approx. 90°C (e.g. commercial kitchens, boiler rooms)

Specifications

Compatible with

• Fike 25-0046-201 Multipoint ASD head removal tool
• Fike 23-0244-510 head removal key ring for ASD detectors

Looking for the white version? See the Fike 205-0003 Sita Multipoint ASD detector.

Fire alarm systems should be designed, installed and commissioned by a competent person.