The Fike 505-0008 is the 8-zone control panel in the TwinflexPro2 range, Fike's intelligent two-wire fire alarm system. Each zone needs only one pair of wires, and Multipoint ASD detectors (with or without built-in sounder and strobe), standalone sounders, sounder beacons and manual call points all connect to that same circuit. Fewer cable runs and fewer installation points make the system quicker to install, and with eight zones on board the panel suits larger sites without extra expansion cards.
The panel shows whether an alarm came from a smoke detector, a heat detector or a call point, and gives a separate fault indication for every zone. Checkpoint alarm confirmation lets each zone be set as a dwelling or a communal area: a dwelling zone can run a local pre-alarm of 1 to 5 minutes so the cause can be checked before the building is evacuated, while a communal zone goes straight to full alarm. Two conventional sounder circuits, volt-free fire and fault relays and a monitored input are also built in, and settings can be programmed from the keypad or with Fike's PC-based OSP software.
| Manufacturer | Fike |
|---|---|
| Model / part number | 505-0008 |
| Range | TwinflexPro2 (TWINFLEXpro two-wire fire alarm system) |
| Product type | Fire alarm control panel |
| System | 2-wire (Twinflex) |
| Zones | 8 |
| Devices per zone | Up to 32 (zone loading 27 SLU) |
| Maximum zone length | 500 m |
| Zone operating voltage | 29.9 V DC nominal |
| Maximum zone current | 250 mA |
| Event log | 500 events |
| Display | 4 line x 20 character LCD (non-touchscreen) |
| Zone labels | 12 characters |
| Repeater connection | RS485, up to 8 repeater panels |
| Inputs | 1 x resistance monitored input (3k3 EOL, 680R firing resistor), 2 x unmonitored inputs |
| Fire outputs | 1 x volt-free relay (30 V DC, 1 A max), 2 x 24 V conventional sounder circuits (10K EOL, 315 mA max) |
| Fault output | 1 x volt-free relay (30 V DC, 1 A max) |
| Mains supply | 230 V AC +10% / -15%, 50/60 Hz |
| Standby batteries | 2 x 12 V 3.3 Ah sealed lead acid |
| Operating temperature | +5 to +40 °C |
| Dimensions (H x W x D) | 331 x 331 x 99 mm |
| Approvals | EN54-2, EN54-4, LPCB, UKAS |
| Compliance | RoHS, WEEE |
| EAN | 5060855670020 |
Fire alarm systems should be designed, installed and commissioned by a competent person.
| Product Code | 505-0008 |
|---|---|
| Manufacturer | Fike |
| Product Type | Intruder & Smoke Alarm |
| Technology | 2-wire (Twinflex) |
| Device Type | fire alarm panel |
| Zones Onboard | 8 |
| Logged Events | 500 |
| Devices Per Zone | 32 |
| Colour | White |
We provide tailored support for you and your CCTV system.
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
As cheap as £10, orders placed before 2:30pm are dispatched for delivery within 1–2 working days!
