HIKVISION - DS-K2210 - Elevator Master Controller, TCP/IP, RS-485, Wiegand, 5 Relay Outputs, Guide Rail

Hikvision DS-K2210 — elevator master controller for floor access

The DS-K2210 brings lift floors into the access-control system. A reader in the car — a DS-K1107AM on Wiegand or an OSDP unit on RS-485 — identifies the passenger, and the controller's relay outputs enable only the floor buttons that person is permitted to use. Dedicated inputs put the lift into panic, fire-alarm or maintenance mode so the building's life-safety logic overrides access rules. It connects over TCP/IP and mounts on a guide rail in the lift machine room or car top.

Readers and outputs

Communication by TCP/IP, RS-485 and Wiegand; the datasheet allows up to two RS-485 card readers or two Wiegand card readers. Five relay outputs enable floor selections. Inputs for a panic button, a fire-alarm button and a maintenance button.

Status and timekeeping

An internal clock and RTC keep schedules running if the network drops. The indicator scheme shows power, running state, serial and network activity, relay state and arming — useful when fault-finding in a machine room.

Power and mounting

12 VDC ±15%; guide-rail installation at 167 × 105 × 30 mm; 0–90% humidity non-condensing, with a wide temperature range (the datasheet quotes -40 °F to 158 °F).

DS-K2210 technical specification

What you'll need with it

• A reader in the lift car — Wiegand DS-K1107AM or RS-485 DS-K1T805MBWX
• A 12 VDC supply and a guide rail in the machine room or car top
• Interface wiring from the five relay outputs to the lift's floor-button circuits (coordinate with the lift contractor)
• Cat5e/Cat6; iVMS-4200 / HikCentral

Frequently asked questions

What does the DS-K2210 do?

It controls which lift floors a cardholder can select, using a reader in the car and five relay outputs to the floor buttons.

How many readers can it take?

Up to two RS-485 or two Wiegand card readers.

How does it handle fire alarm?

A dedicated fire-alarm input, plus panic and maintenance inputs, override normal access logic.

How many floors can it control?

Five relay outputs are on this master controller; ask us about Hikvision's extension modules for taller buildings.

How is it powered and mounted?

12 VDC ±15%, on a guide rail, 167 × 105 × 30 mm.

Trade pricing

Zenith Security Co is an authorised Hikvision partner supplying genuine UK-specification stock. Prices shown are for trade account holders — contact us for account terms and stock, call 01902 902251, or collect from our Wolverhampton trade counter. Browse all intercoms, the wider access control range, or the full Hikvision range.

Hikvision Authorised Distributor: Zenith Security Co is verified by Hikvision UK as an Authorised Distributor/Wholesaler (check us with the "Verify a Wholesaler" tool on Hikvision UK's wholesaler page), so this is genuine UK-supplied Hikvision equipment. See our full Hikvision range.