HIKVISION - DS-K1107AM - Mifare Card Reader, IP65, RS-485 / Wiegand

Hikvision DS-K1107AM — Mifare card reader for K27 controllers, IP65

The DS-K1107AM is the everyday reader for a Hikvision access-control system. It reads 13.56 MHz Mifare credentials — cards or DS-K7M102-M fobs — and passes them to the controller over RS-485 or Wiegand, chosen with a DIP switch, so it works on the DS-K2702X and DS-K2M002X as well as on the DS-K2210 lift controller or any third-party panel with Wiegand input. The DS-K1107AMK adds a 12-key PIN pad. At 115 × 44 mm it fits a door mullion; IP65 covers a sheltered outdoor door, and for fully exposed positions or EM fobs the IP66 DS-K1105EMB is the alternative.

Hikvision readers connect to an access controller over RS-485 or Wiegand; the controller holds the credentials and drives the lock. They pair with the DS-K27 controllers and DS-K2M002X modules listed on this site, and with third-party controllers that accept Wiegand 26/34. Tell us your controller and card type and we will confirm the match.

Reading and output

13.56 MHz with a read distance of up to 50 mm. Output is RS-485 or Wiegand, selected by DIP switch; a tamper switch reports removal and a buzzer confirms reads.

Rating and fitting

IP65, -20 °C to 65 °C, 10–90% humidity non-condensing. 12 VDC at 2 W or less. Wall mounting with screws at 115 × 44 × 22 mm — the datasheet notes it does not fit a gang box.

DS-K1107AM technical specification

What you'll need with it

• An access controller with RS-485 or Wiegand reader ports — DS-K2702X / DS-K2M002X
• 12 VDC from the controller or a local supply
• Cards or fobs to match the reader (see card type)

Frequently asked questions

Which cards does the DS-K1107AM read?

13.56 MHz Mifare credentials, read at up to 50 mm.

RS-485 or Wiegand?

Both — selected with the on-board DIP switch.

Is there a keypad version?

Yes — the DS-K1107AMK.

Is it outdoor rated?

IP65, -20 °C to 65 °C. For a fully exposed gate the IP66 DS-K1105EMB / EMKB is the tougher choice.

Does it fit a standard back box?

No — the datasheet states wall mounting with screws and no gang-box support.

Trade pricing

Zenith Security Co is an authorised Hikvision partner supplying genuine UK-specification stock. Prices shown are for trade account holders — contact us for account terms and stock, call 01902 902251, or collect from our Wolverhampton trade counter. Browse all intercoms, the wider access control range, or the full Hikvision range.

Hikvision Authorised Distributor: Zenith Security Co is verified by Hikvision UK as an Authorised Distributor/Wholesaler (check us with the "Verify a Wholesaler" tool on Hikvision UK's wholesaler page), so this is genuine UK-supplied Hikvision equipment. See our full Hikvision range.