HIKVISION - DS-K2M002X - 2-Door Access Module for K27 Controllers, RS-485, OSDP, Guide Rail

Hikvision DS-K2M002X — two-door access module for K27 controllers

The DS-K2M002X is how a K27 system grows. A DS-K2702X or DS-K2704X controller carries five RS-485 ports for access modules, each port supporting up to 16 modules, and every DS-K2M002X on that bus adds two fully equipped doors — relay, exit button, door contact, OSDP reader ports and Wiegand inputs — close to the doors themselves rather than back at the controller. Hikvision's own DS-K2708X eight-door cabinet is built from exactly this: a DS-K2704X(P) plus two of these modules.

Hikvision's K27 access controllers come two ways: the cabinet version (100–240 VAC mains input, battery charging, wall-mounted steel enclosure) and the (P) board version — the same controller PCB on a guide rail, powered from 12 VDC, for fitting inside your own enclosure or a larger Hikvision cabinet. The DS-K2708X 8-door cabinet, for example, contains a DS-K2704X(P) and two DS-K2M002X modules. Readers connect over RS-485 (OSDP) or Wiegand; doors can be extended with DS-K2M002X access modules. Configuration is by web browser, iVMS-4200 or HikCentral.

Per-door hardware

Two lock relays, two exit-button inputs, two door-contact inputs, four alarm inputs, two alarm outputs and a tamper switch. Four RS-485 ports — two for OSDP readers and two for the link to the access controller — and two Wiegand inputs (standard 26/34 with custom settings). The datasheet's linked capacity per module is two doors, four RS-485 (OSDP) readers and two Wiegand readers.

Functions

Configuration via web browser, multi-factor authentication, first person in and multi-door interlocking (32 groups of 32 doors) are all provided through the access controller the module is connected to.

Power and installation

12 ± 15% VDC with battery charge/discharge support, consumption ≤ 50 W. Guide-rail installation; six indicators (power, running, two communication, two door). -10 °C to 55 °C, 0–90% humidity. MCU-based.

DS-K2M002X technical specification

What you'll need with it

• A K27 access controller — DS-K2701X, DS-K2702X or DS-K2704X (cabinet or (P) board)
• A 12 VDC supply and enclosure with guide rail near the doors
• Readers — OSDP DS-K1T805MBWX or Wiegand DS-K1107AM — plus locks and exit buttons

Frequently asked questions

Does the DS-K2M002X work on its own?

No — it is an expansion module for K27 controllers; its functions are provided through the controller over RS-485.

How many doors does it add?

Two per module, each with a relay, exit button, door contact and OSDP/Wiegand reader ports.

How many modules can a controller take?

The K27 datasheets give five module ports on the controller, each supporting up to 16 modules, with extended capacity of 125–128 doors using 62 modules.

Does it support OSDP readers?

Yes — two of its four RS-485 ports are for OSDP readers; two Wiegand inputs are also provided.

How is it powered?

12 ± 15% VDC with battery charge/discharge; consumption up to 50 W.

Trade pricing

Zenith Security Co is an authorised Hikvision partner supplying genuine UK-specification stock. Prices shown are for trade account holders — contact us for account terms and stock, call 01902 902251, or collect from our Wolverhampton trade counter. Browse all intercoms, the wider access control range, or the full Hikvision range.

Hikvision Authorised Distributor: Zenith Security Co is verified by Hikvision UK as an Authorised Distributor/Wholesaler (check us with the "Verify a Wholesaler" tool on Hikvision UK's wholesaler page), so this is genuine UK-supplied Hikvision equipment. See our full Hikvision range.