HIKVISION - DS-K1107AMK - Mifare Card Reader with Keypad, IP65, RS-485 / Wiegand

Hikvision DS-K1107AMK — Mifare card reader with keypad, IP65

The DS-K1107AMK is the everyday reader for a Hikvision access-control system. It reads 13.56 MHz Mifare credentials — cards or DS-K7M102-M fobs — and passes them to the controller over RS-485 or Wiegand, chosen with a DIP switch, so it works on the DS-K2702X and DS-K2M002X as well as on the DS-K2210 lift controller or any third-party panel with Wiegand input. The keypad allows card-plus-PIN or PIN-only modes. At 115 × 44 mm it fits a door mullion; IP65 covers a sheltered outdoor door, and for fully exposed positions or EM fobs the IP66 DS-K1105EMB is the alternative.

Hikvision readers connect to an access controller over RS-485 or Wiegand; the controller holds the credentials and drives the lock. They pair with the DS-K27 controllers and DS-K2M002X modules listed on this site, and with third-party controllers that accept Wiegand 26/34. Tell us your controller and card type and we will confirm the match.

Reading and output

13.56 MHz with a read distance of up to 50 mm. Output is RS-485 or Wiegand, selected by DIP switch; a tamper switch reports removal and a buzzer confirms reads. The 12-key pad (0–9, *, #) supports PIN entry.

Rating and fitting

IP65, -20 °C to 65 °C, 10–90% humidity non-condensing. 12 VDC at 2 W or less. Wall mounting with screws at 115 × 44 × 22 mm — the datasheet notes it does not fit a gang box.

DS-K1107AMK technical specification

What you'll need with it

• An access controller with RS-485 or Wiegand reader ports — DS-K2702X / DS-K2M002X
• 12 VDC from the controller or a local supply
• Cards or fobs to match the reader (see card type)

Frequently asked questions

Which cards does the DS-K1107AMK read?

13.56 MHz Mifare credentials, read at up to 50 mm.

RS-485 or Wiegand?

Both — selected with the on-board DIP switch.

Can it be used PIN-only?

The keypad supports PIN entry; the mode is configured on the controller.

Is it outdoor rated?

IP65, -20 °C to 65 °C. For a fully exposed gate the IP66 DS-K1105EMB / EMKB is the tougher choice.

Does it fit a standard back box?

No — the datasheet states wall mounting with screws and no gang-box support.

Trade pricing

Zenith Security Co is an authorised Hikvision partner supplying genuine UK-specification stock. Prices shown are for trade account holders — contact us for account terms and stock, call 01902 902251, or collect from our Wolverhampton trade counter. Browse all intercoms, the wider access control range, or the full Hikvision range.