Yealink YPS20 - Partition Sensor for Divisible Meeting Rooms
Product Features
The Yealink YPS20 is a surface-mount infrared partition sensor for divisible meeting rooms. Connected to the GPIO interface of a Yealink AP08, it detects whether a movable partition is open or closed so Yealink Room Designer can switch the room setup automatically. It has a 1.5 m sensing range and a 10 m cable. Check before ordering: it needs a Yealink AP08.
Yealink YPS20 - Infrared Partition Sensor for Divisible Rooms
The Yealink YPS20 is a compact surface-mount sensor that uses an infrared (IR) beam to sense the position of a movable room partition. The beam strength is adjustable, with a maximum effective sensing distance of 1.5 m, and two LEDs show power, communication and partition detection status. It connects to the GPIO interface of the Yealink AP08, and Yealink Room Designer software uses its signal to set up a divisible meeting room automatically. A 10 m cable is included.
What the YPS20 is for
It suits meeting spaces that can be split into two rooms with a movable wall, where the audio and video setup should change when the partition opens or closes. It works with the Yealink AP08 and Yealink Room Controller. See our video conferencing range and the Yealink brand page.
Key features
- Infrared diffuse reflection sensing for high precision and low false detection
- Effective working distance of 1.5 m
- Adjustable sensitivity for different environments
- 10 m cable included for flexible installation
- Two-colour LED indicators
- Connects to the Yealink AP08 GPIO interface; works with Yealink Room Controller
- IP65 rated housing
Full specification
| General | |
| Brand | Yealink |
| Model | YPS20 |
| Manufacturer part number (MPN) | YPS20 |
| EAN | 6938818321175 |
| Type | Surface-mount infrared partition sensor |
| Material | ABS housing, PMMA lens |
| IP rating | IP65 (IEC) |
| Sensing | |
| Sensor type | Diffuse reflection |
| Detection distance | 1.5 m |
| Standard detection object | White drawing paper 300 x 300 mm |
| Return difference | 20% or less |
| Light source | Infrared LED (850 nm) |
| Response time | Less than 0.5 ms |
| Power and signal | |
| Supply voltage | DC 12-24 V, ±10% ripple (P-P) |
| Control output | NPN/PNP output, wiring switching |
| Current output | 100 mA |
| Current consumption | Less than 25 mA |
| Controls and indicators | |
| Action mode | Dark ON / Light ON, switched by knob |
| Switch | 270° knob |
| Sensitivity adjustment | Single knob |
| Indicators | Action (orange), stable (green) |
| Protection and environment | |
| Protection circuit | Power reverse, output short-circuit and output reverse protection |
| Insulation resistance | More than 20 MΩ (DC 500 V) |
| Withstand voltage | AC 1500 V 50/60 Hz for 1 min |
| Operating temperature | -35 to 55 °C |
| Storage temperature | -40 to 70 °C (no icing or condensation) |
| Operating humidity | 35-85% RH |
| Ambient light | Incandescent below 3000 lx; sunlight below 10000 lx |
What you will need
A Yealink AP08 audio processor to connect the sensor to (GPIO interface), and Yealink Room Designer software to set up the divisible room behaviour. Plan the cable route: the included cable is 10 m.
Buying from Zenith Security Co.
We are a UK supplier, not an installer, and we will go through the product with you before you buy. We have been operating since 2012 and our trade counter is at Unit 3, Park View Centre, 243 Dudley Road, Wolverhampton WV2 3JU. Trade accounts are available - see our trade customer page.
What does the YPS20 connect to?
The GPIO interface of the Yealink AP08. Yealink says it works with the AP08 and Yealink Room Controller for adaptive room settings.
How far can it sense?
Yealink lists an effective detection distance of 1.5 m, with adjustable sensitivity.
How long is the cable?
A 10 m cable is included.
Can it be used in a damp area?
Yealink lists an IP65 rating and an operating range of -35 to 55 °C.
How quickly can I get it?
Orders are dispatched for delivery within 1-3 working days to England, Scotland and Wales; we do not ship to Northern Ireland. You can also collect from our trade counter - please call first so we can confirm your order is ready.
Can I collect it from your trade counter?
Yes. Our trade counter is at Unit 3, Park View Centre, 243 Dudley Road, Wolverhampton WV2 3JU. Please call 01902 902251 first so we can confirm your order is ready.
Questions on specification or compatibility: call 01902 902251, see our FAQ and support pages, or contact us.
| Product Code | YPS20 |
|---|---|
| Dimensions | Surface-mount sensor; 10 m cable included |
| Manufacturer | Yealink |
| Power Features | DC 12-24 V (±10% ripple), current consumption under 25 mA |
| Connection Type | Wired |
| Product Type | video conferencing |
| Colour | Black |
RELATED PRODUCTS
TECHNICAL SUPPORT
We provide tailored support for you and your CCTV system.
3 YEAR WARRANTY
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
COME & VISIT US
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
FREE DELIVERY OVER £ 499
As cheap as £10, orders placed before 2:30pm are dispatched for delivery within 1–3 working days!
