The Fike 505-0004-B is the black version of the TwinflexPro2 4-zone control panel, Fike's intelligent 2-wire fire alarm panel for Twinflex devices. Multipoint ASD detectors (with or without built-in sounder and strobe), standalone sounders, sounder beacons and manual call points all share a single 2-core screened cable per zone, so there are fewer cable runs than with a conventional system that needs separate detection and sounder circuits.
The panel shows whether an alarm came from a smoke detector, a heat detector or a call point, and checks every zone for detector head removal, device faults, end-of-line faults and open or short circuits. With Checkpoint alarm confirmation, zones are set as dwelling or communal: a dwelling can give a local pre-alarm of 1 to 5 minutes while the cause is checked, and a communal area goes straight to full alarm. Up to 8 repeater panels can be connected over RS485, and the panel can be extended with the 505-0006 4-zone expansion card, or with the 505-0007 conventional zone card to accept conventional devices on zones 5 to 8.
| Manufacturer | Fike |
|---|---|
| Model / part number | 505-0004-B (TwinflexPro2 4-zone panel, black) |
| Product line | TwinflexPro2 (TWINFLEXpro) |
| System type | Intelligent 2-wire (Twinflex protocol, analogue non-addressable) |
| Detection zones | 4 |
| Devices per zone | Up to 32 Twinflex devices (subject to device loading units) |
| Device protocol | Twinflex V3 and TwinflexPro |
| Zone cable | 2-core 1.5 mm² screened fire-rated cable, up to 500 m per zone |
| Monitored sounder circuits | Up to 2 (250 mA) |
| Monitored relay circuits | Up to 2 (250 mA) |
| On-board relays | Volt-free common fire and common fault (1 A, 30 V max) |
| Inputs | 2 programmable latching/non-latching inputs, 1 monitored input |
| Repeater connection | RS485, up to 8 repeater panels |
| PC connection | USB-B |
| Auxiliary supply | 24-30 V DC, 250 mA |
| Display | 4 line x 20 character LCD |
| Event log | 500 events |
| Zone labels | 12 characters |
| Mains supply | 230 V AC +10% / -15%, 50/60 Hz |
| Standby batteries | 2 x 12 V 3.3 Ah (required) |
| Enclosure | V0-rated ABS |
| IP rating | IP30 |
| Cable entry | 13 x 20 mm knockouts, 1 x 50 x 50 mm pull-out tab |
| Dimensions (H x W x D) | 331 x 331 x 99 mm |
| Weight | 2.28 kg (excluding batteries) |
| Operating temperature | +5 to +40 °C |
| Standards | EN 54-2 and EN 54-4 |
| Colour | Black |
| Compliance | RoHS, WEEE |
| Warranty | 2-year limited |
Prefer the standard finish? See the Fike 505-0004 TwinflexPro2 4-zone control panel, or the Fike 505-0008 8-zone panel for larger sites.
Fire alarm systems should be designed, installed and commissioned by a competent person.
| Product Code | 505-0004-B |
|---|---|
| Manufacturer | Fike |
| Product Type | Intruder & Smoke Alarm |
| Technology | 2-wire (Twinflex) |
| Device Type | fire alarm panel |
| Zones Onboard | 4 |
| Logged Events | 500 |
| Devices Per Zone | 32 |
| Protection Level, Ingress Protection | IP30 |
| Colour | Black |
We provide tailored support for you and your CCTV system.
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
As cheap as £10, orders placed before 2:30pm are dispatched for delivery within 1–2 working days!
