The Fike 505-0008-B is the black version of the 8-zone TwinflexPro2 control panel, Fike's intelligent two-wire fire alarm system. It is the same 8-zone panel as the standard 505-0008, finished in black for sites where a dark panel suits the interior better than white.
Each zone runs on a single pair of wires that carries detection and alarm devices together. Multipoint ASD detectors (with or without built-in sounder and strobe), standalone sounders, sounder beacons and manual call points all connect to the same circuit, which cuts cable runs and installation time compared with a conventional layout. The panel shows whether an alarm came from a smoke detector, a heat detector or a call point, and reports faults separately for each zone, including detector head removal and open or short circuit faults.
Checkpoint alarm confirmation lets each zone be set as a dwelling or a communal area. A dwelling zone can run a local pre-alarm of 1 to 5 minutes, sounding only in that dwelling while the cause is checked, while a communal zone goes straight to full alarm. Up to 8 TwinflexPro2 repeater panels can be linked over RS485, and with Fike's conventional zone card fitted, zones 5 to 8 can accept conventional devices.
| Manufacturer | Fike |
|---|---|
| Model / part number | 505-0008-B |
| Range | TwinflexPro2 |
| Product type | Fire alarm control panel |
| System | 2-wire (Twinflex), analogue non-addressable |
| Colour | Black |
| Zones | 8 |
| Devices per zone | Up to 32, subject to device loading units (DLUs) |
| Device protocol | Twinflex V3 and TwinflexPro |
| Zone cable | 2-core 1.5 mm² screened fire-rated cable, 500 m maximum per zone |
| Monitored sounder outputs | Up to 2 (200 mA) |
| Relays | Common fire and common fault, volt-free, 1 A 30 V max |
| Inputs | 1 monitored input, 2 programmable latching/non-latching inputs |
| Auxiliary supply | 24-30 V, 250 mA |
| Event log | 500 events |
| Zone labels | 12 characters |
| Repeater connection | RS485, up to 8 repeater panels |
| Programming | Keypad or PC-based OSP software (USB-B PC link) |
| Mains supply | 230 V AC +10% / -15%, 50/60 Hz |
| Standby batteries | Requires 2 x 12 V 3.3 Ah |
| Operating temperature | +5 to +40 °C |
| Construction | V0 rated ABS |
| IP rating | IP30 |
| Cable entry | 13 x 20 mm knockouts, 1 x 50 x 50 mm pull-out tab |
| Dimensions | 331 x 331 x 99 mm |
| Weight | 2.36 kg (excluding batteries) |
| Standards | BS EN54-2, BS EN54-4 |
| Compliance | RoHS, WEEE |
| Warranty | 2-year limited |
Fire alarm systems should be designed, installed and commissioned by a competent person.
| Product Code | 505-0008-B |
|---|---|
| Manufacturer | Fike |
| Product Type | Intruder & Smoke Alarm |
| Technology | 2-wire (Twinflex) |
| Device Type | fire alarm panel |
| Zones Onboard | 8 |
| Logged Events | 500 |
| Devices Per Zone | 32 |
| Protection Level, Ingress Protection | IP30 |
| Colour | Black |
We provide tailored support for you and your CCTV system.
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
As cheap as £10, orders placed before 2:30pm are dispatched for delivery within 1–2 working days!
