Fike 604-0002 - TwinflexPro2 2-Zone Fire Alarm Boxed Kit

Fike 604-0002 TwinflexPro2 2-Zone Fire Alarm Boxed Kit

The Fike 604-0002 is a 2-zone contractor kit for UK buildings, based on the TwinflexPro2 2-wire fire alarm system. The control panel, Multipoint detectors with sounders, manual call points and a head removal tool all come together in one box.

On a Twinflex 2-wire system the detectors, call points and sounders on a zone all share the same pair of wires. That cuts cable, labour and disruption compared with a conventional system that needs separate sounder circuits. Each Multipoint detector can run as either a smoke or a heat detector, chosen with switches on its rear, so a single detector type covers both roles.

What's in the box

• 1 x Fike 505-0002 TwinflexPro2 2-zone control panel
• 7 x Fike 204-0001 Twinflex Multipoint ASD detector with sounder
• 2 x Fike 402-0006 Twinflex manual call point
• 1 x Fike 25-0046-201 detector head removal tool

Batteries are not included: the panel needs 2 x 12V 3.2Ah sealed lead acid batteries.

Key features

• One pair of wires per zone carries detectors, call points and sounders
• 4-line x 20-character LCD display
• Tells call point alarms apart from detector alarms
• Checkpoint alarm verification
• Highlighted selection menu
• Event log of up to 500 events
• 3 enhanced test modes
• End-of-line (EOL) built into every device
• Up to 32 devices per zone
• Multipoint detectors switch between smoke and heat detection, with 7 detection modes

Specifications

Compatible with

• Fike 204-0003 Twinflex Multipoint ASD detector (extra detection)
• Fike 204-0012 Twinflex Multipoint ASD with sounder strobe
• Fike 802-0006 Twinflex input/output module
• Fike 25-0083-303 manual call point protective cover

Need a different size? See the Fike 604-0004 4-zone kit or the Fike 604-0008 8-zone kit.

Fire alarm systems should be designed, installed and commissioned by a competent person.