Fike 604-0004 - TwinflexPro2 4-Zone Fire Alarm Boxed Kit

Fike 604-0004 TwinflexPro2 4-Zone Fire Alarm Boxed Kit

The Fike 604-0004 is a 4-zone contractor kit built around Fike's LPCB-approved TwinflexPro2 2-wire fire alarm panel. The control panel, Multipoint detectors with sounders, manual call points and a head removal tool all come together in one box.

On a Twinflex 2-wire system the detectors, call points and sounders on a zone all share the same pair of wires. That cuts cable, labour and disruption compared with a conventional system that needs separate sounder circuits. Each Multipoint detector can run as either a smoke or a heat detector, chosen with switches on its rear, so a single detector type covers both roles.

What's in the box

• 1 x Fike 505-0004 TwinflexPro2 4-zone control panel
• 7 x Fike 204-0001 Twinflex Multipoint ASD detector with sounder
• 2 x Twinflex manual call points with covers
• 1 x detector head removal tool

Batteries are not included: the panel needs 2 x 12V 3.2Ah sealed lead acid batteries.

Key features

• One pair of wires per zone carries detectors, call points and sounders
• 4-line x 20-character LCD display
• Tells call point alarms apart from detector alarms
• Checkpoint alarm verification
• Highlighted selection menu
• Event log of up to 500 events
• 3 enhanced test modes
• End-of-line (EOL) built into every device
• Up to 32 devices per zone
• Multipoint detectors switch between smoke and heat detection, with 7 detection modes
• Zones can be set to day/night detection mode
• LPCB-approved TwinflexPro2 panel

Specifications

Compatible with

• Fike 505-0006 expansion card (converts the 4-zone panel to 8 zones)
• Fike 204-0003 Twinflex Multipoint ASD detector (extra detection)
• Fike 204-0012 Twinflex Multipoint ASD with sounder strobe
• Fike 802-0006 Twinflex input/output module

Need a different size? See the Fike 604-0002 2-zone kit or the Fike 604-0008 8-zone kit.

Fire alarm systems should be designed, installed and commissioned by a competent person.