DS-2AE4215ITG — 2 MP, 15× Zoom, Turbo HD PTZ
The DS-2AE4215ITG is a Turbo HD PTZ speed dome: 2 MP at 15× optical zoom, running over coax to a DVR. If there is already cable in the ground, this is what saves you rewiring the site.
It pans 360° endless and tilts -15° to 90° (auto flip), holds 256 presets, and supports patrols and pattern scans so it can run a tour unattended. Built-in IR reaches up to 100 m. The video output is switchable between TVI, AHD, CVI and CVBS, so it will talk to most existing recorders.
Technical specification
| Resolution | 1920 × 1080 |
| Image sensor | 1/2.8" Progressive Scan CMOS |
| Optical zoom | 15 × optical, 16 × digital |
| Focal length | 4.8 mm to 72 mm, 15 × optical |
| Field of view | Horizontal FOV: 57.6° to 4° (wide to tele) Vertical FOV: 34.4° to 2.2° (wide to tele) Diagonal FOV: 64.5° to 4.6° (wide to tele) |
| Aperture | F1.6 to F3.5 |
| Minimum illumination | Color: 0.005 Lux @(F1.6, AGC ON), B/W: 0.001 Lux @(F1.6, AGC ON), 0 lux with IR |
| Wide dynamic range | ≥ 120 dB |
| Supplement light | Up to 100 m |
| Pan range | 360° endless |
| Tilt range | -15° to 90° (auto flip) |
| Pan speed | Pan manual speed: 0.1° to 80°/s Pan preset speed: 80°/s |
| Tilt speed | Tilt manual speed: 0.1° to 80°/s Tilt preset speed: 80°/s |
| Presets | 256 |
| Patrol / pattern | 10 patrols, up to 32 presets for each patrol; 5 patterns, record time over 10 minutes for each scan |
| Video output | Switchable TVI/AHD/CVI/CVBS video output, (NTSC or PAL composite, BNC) |
| Protocols | UTC protocol (or HIKVISION-C protocol in previous DVR) |
| RS-485 | Half-duplex mode Self-adaptive HIKVISION, Pelco-P, Pelco-D protocol |
| Power | 12 VDC, max. 20 W (IR: 7 W) |
| Dimensions | Ø 164.5 × 290.6 mm (Ø 6.47" × 11.45") |
| Operating conditions | -30° C to 65° C (-22° F to 149° F). Humidity 90% or less |
| Protection | IP66 (outdoor dome), TVS 4,000 V lightning protection, surge protection and voltage transient protection |
Specification taken from Hikvision's published data for this model. Appearance and parameters may vary; ask us if a particular figure matters for your project.
What you'll need
Frequently asked questions
Will this work with my existing DVR?
It outputs switchable TVI, AHD, CVI or CVBS over coax and takes PTZ control over the same cable (UTC) or RS-485, so it works with most Hikvision and many third-party DVRs. Tell us your recorder model and we will confirm before you order.
Can I use it on network cable instead?
No — this is the coax version. If you are running new cable, an IP PTZ over Cat6 is the better choice; see our Hikvision PTZ camera guide.
How far can it see at night?
Hikvision quotes IR to 100 m. That is the illumination range, not the identification range — you will recognise a person well before that distance and a vehicle further out.
Does it need a special power supply?
12 VDC, max. 20 W (IR: 7 W). Check this against your existing supply — the larger domes draw considerably more than a fixed camera, and an undersized PSU is the usual reason a PTZ resets when it moves.
Is this genuine UK stock, and how fast is delivery?
Yes. Zenith Security Co. is an authorised Hikvision partner and has been operating since 2012. Orders are delivered within 1–3 working days to addresses in England, Scotland and Wales, and warranty and technical support come direct from us.
Supplied by Zenith Security Co., an authorised Hikvision partner with a trade counter and live showroom in Wolverhampton. We are a supplier, not an installer: we go through the product with you before you buy, and depending on your requirements and area we may be able to recommend a qualified trade installer. Call 01902 902251 or contact us; installers can open a trade account for trade pricing. Compare the range in our Hikvision PTZ camera guide or browse all Hikvision products.