HIKVISION - DS-K1109DKFB-QR - Fingerprint, Card, Keypad & QR Code Reader, M1/DESFire/Felica, IP65

Hikvision DS-K1109DKFB-QR — fingerprint, card, keypad and QR-code reader

The DS-K1109DKFB-QR is the reader to fit where a controller-based system needs to accept QR codes — visitor passes on a phone, printed contractor tickets, e-tickets — alongside staff credentials. It reads M1, DESFire and Felica cards, takes a PIN, reads fingerprints (5000 templates) and scans QR codes and seven barcode symbologies; the datasheet notes QR recognition works when the reader is connected over RS-485. It suits the DS-K2702X and DS-K2M002X and sits happily outdoors at IP65 and -40 °C. The DS-K1109DKB-QR is the same reader without fingerprint. For a standalone terminal with QR see the DS-K1T344MBWX-QRE1.

Hikvision readers connect to an access controller over RS-485 or Wiegand; the controller holds the credentials and drives the lock. They pair with the DS-K27 controllers and DS-K2M002X modules listed on this site, and with third-party controllers that accept Wiegand 26/34. Tell us your controller and card type and we will confirm the match.

Credentials

A fingerprint sensor with 5000-template capacity; M1, DESFire and Felica cards; a PIN keypad; and an optical scanner for QR codes (over RS-485) and barcodes in Code 128, Interleaved 2 of 5, Matrix 2 of 5, Code 39, Codabar, Code 9 and UCC/EAN-128 formats.

Connection, rating and power

RS-485 and Wiegand outputs with a tamper switch and buzzer. IP65, -40 °C to 65 °C, 0–90% humidity. 12 VDC; consumption up to 14 W with load, 4 W without. Wall mounting at 125 × 84.5 × 18 mm.

DS-K1109DKFB-QR technical specification

What you'll need with it

• A K27 controller or DS-K2M002X module with an RS-485 reader port (required for QR recognition)
• 12 VDC supply rated for 14 W
• Cards (M1/DESFire/Felica) and a means of issuing QR codes (HikCentral visitor module or your own system)

Frequently asked questions

Does the reader scan QR codes over Wiegand?

The datasheet states QR-code recognition is supported when connected by RS-485; use RS-485 to a K27 controller.

Which barcodes?

Code 128, Interleaved 2 of 5, Matrix 2 of 5, Code 39, Codabar, Code 9 and UCC/EAN-128.

Which cards?

M1, DESFire and Felica.

How many fingerprints?

5000.

Is it outdoor rated?

IP65, -40 °C to 65 °C.

Trade pricing

Zenith Security Co is an authorised Hikvision partner supplying genuine UK-specification stock. Prices shown are for trade account holders — contact us for account terms and stock, call 01902 902251, or collect from our Wolverhampton trade counter. Browse all intercoms, the wider access control range, or the full Hikvision range.

Hikvision Authorised Distributor: Zenith Security Co is verified by Hikvision UK as an Authorised Distributor/Wholesaler (check us with the "Verify a Wholesaler" tool on Hikvision UK's wholesaler page), so this is genuine UK-supplied Hikvision equipment. See our full Hikvision range.