Ruijie RG-S2915-10GT2MS-P-L is a 10-port gigabit Layer 2+ managed switch with PoE/PoE+ on ports 1 to 8, a 125 W PoE budget and two SFP uplink ports running at 1G or 2.5G. The SFP slots need modules to be used.
The RG-S2915-10GT2MS-P-L is a Layer 2+ managed switch from Ruijie with ten gigabit RJ45 ports, eight of them supplying PoE/PoE+, and two SFP ports that run at 1G or 2.5G for uplinks.
Ruijie lists the RG-S2915-10GT2MS-P-L for offices, hotels, retail stores, factories and schools. In practice it suits a small site that needs to power up to eight PoE devices, such as access points or IP cameras, from one managed switch, with two further gigabit ports for non-PoE equipment.
Each of ports 1 to 8 can supply up to 30 W (IEEE 802.3af/at), but the switch shares a total PoE budget of 125 W. Eight devices drawing 15.4 W each fit within that budget; eight 30 W devices would not. Ports 9 and 10 are gigabit RJ45 ports that the specification does not list as PoE.
As a Layer 2+ switch it offers 4,094 VLANs plus static routing, RIP, RIPng and OSPFv2, and can be managed by CLI, web interface or the MACC public cloud. The two SFP uplinks run at 1G or 2.5G, so they suit a link to another switch using SFP modules.
| Fixed Service Ports | 10 x 10/100/1000BASE-T ports (ports 1 to 8 support PoE/PoE+); 2 x 1GE/2.5GE SFP ports |
| Fixed management port | 1 x RJ45 console port |
| USB | 1 x USB port |
| Packet forwarding rate | 22.5 Mpps |
| Switching capacity | 30 Gbps |
| CPU | Built-in single-core CPU, with the clock speed of 1.2 GHz |
| Flash memory | 64 MB |
| Memory | 512 MB DDR4 |
| Switch buffer | 512 KB |
| Unit dimensions (W x D x H) | 297 mm x 170 mm x 44.5 mm (11.69 in. x 6.69 in. x 1.75 in.) |
| Rack height | 1 RU |
| Unit weight | 2.5 kg (5.51 lbs) |
| Power supply | 1 x fixed power supply |
| Power input | AC input: Rated input voltage: 100 V AC to 240 V AC, 50 Hz to 60 Hz; Maximum input voltage: 90 V AC to 264 V AC, 47 Hz to 63 Hz; Maximum input current: 3 A |
| Maximum power consumption | 16 W (non-PoE); 141 W (full PoE load) |
| PoE port | Ports 1-8 support PoE/PoE+ (IEEE802.3af/at) power supply |
| PoE power cable pairs | Mode A (1-2, 3-6 pairs) |
| PoE output power | Each PoE port provides up to 30 W of power.; The maximum power is 125 W |
| Energy saving | Energy Efficient Ethernet (EEE) |
| Temperature | Operating temperature: 0°C to 45°C (32°F to 113°F); Storage temperature: –40°C to +70°C (–40°F to +158°F) |
| Humidity | Operating humidity: 10% to 90% RH (non-condensing); Storage humidity: 5% to 95% RH (non-condensing) |
| Altitude | 0 m to 5,000 m (0 ft. to 16,404.20 ft.) |
| Mean time between failure (MTBF) | 200,000 hours (about 22 years) |
| Fan | 1 x fixed fan module |
| Heat dissipation | Forced air cooling |
| Acoustic noise | ≤ 37 dB |
| Cable hot swapping | Cable hot swapping for all ports |
| Fan monitoring | Fan speed control and fan failure alarming |
| ESD | Air discharge: 8 kV/15 kV; Contact discharge: 6 kV/8 kV |
| Surge protection | Power port: 6 kV/2 kV; Telecom port: 10 kV |
The table shows the hardware specification. Ruijie publish the full software feature list on the datasheet; ask us if you need a particular protocol or feature confirmed.
A mains supply (the power supply is fixed inside the unit), Cat5e or better network cable to each device, and PoE devices that draw no more than 30 W each and 125 W in total. The two SFP uplinks need SFP modules, which are bought separately; tell us what you want to link to and we will check.
We are a supplier, not an installer. We will go through the RG-S2915-10GT2MS-P-L with you before you buy — the PoE budget against the devices you plan to power, the SFP uplinks and how the switch will be managed — and depending on your requirements and your area we can recommend a qualified trade installer. We have been operating since 2012 and you can visit our trade counter in Wolverhampton.
Ports 1 to 8 supply PoE/PoE+ (IEEE 802.3af/at), up to 30 W each, within a total PoE budget of 125 W. Eight devices at 15.4 W each come to 123.2 W, so they fit; eight devices at 30 W would exceed the budget.
No. The two SFP ports run at 1GE or 2.5GE, so they will not run at 10G.
Yes, Ruijie describe it as Layer 2+ managed. It supports 4,094 VLANs, static routing, RIP, RIPng and OSPFv2, and can be managed by CLI over telnet or console, the web interface or the MACC public cloud.
Ruijie list PoE/PoE+ on ports 1 to 8 only. Ports 9 and 10 are 10/100/1000BASE-T ports for devices that do not need PoE.
Delivery is within 1–3 working days to England, Scotland and Wales. We do not ship to Northern Ireland.
Yes. Our trade counter is at Unit 3, Park View Centre, 243 Dudley Road, Wolverhampton WV2 3JU. Call first so we can confirm the item is there for you.
Questions on specification or compatibility: call 01902 902251, see our FAQ and support pages, or contact us. Trade accounts are available — see trade customers. Browse the full Ruijie Reyee range.
| Product Code | RG-S2915-10GT2MS-P-L |
|---|---|
| Dimensions | 297 mm x 170 mm x 44.5 mm |
| Manufacturer | Ruijie Reyee |
| Colour | Grey |
| Connection Type | Wired |
| Managed | Yes |
We provide tailored support for you and your CCTV system.
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
As cheap as £10, we will deliver your order 3 to 5 working days!
