RUIJIE - XG-SFP-LR-SM1310 - 10G LR SFP+ Module, 1310 nm, 10 km, Duplex LC, Single-Mode

XG-SFP-LR-SM1310 — 10G LR SFP+ Module, 1310 nm, 10 km, Duplex LC, Single-Mode

The XG-SFP-LR-SM1310 is a 10GBASE-LR module in SFP+ form factor with a 10.3125 Gbps data rate. It connects over single-mode fibre (SMF) with a duplex LC connector, and Ruijie rate its reach at 10 km.

What the XG-SFP-LR-SM1310 is for

Ruijie position this module for data centre and campus networks that need cost-effective, high-speed interconnection. With a 10 km reach at 1310 nm over single-mode fibre, it suits 10G links across a campus or between sites in data networking setups.

The module transmits with a DFB transmitter and uses a PIN receiver. It is data diagnosis-capable (DDM/DOM), draws 1.5 W or less and is rated for 0°C to 70°C operating temperatures. It is a 10G module and needs a 10G SFP+ port; it will not run in a 1G-only SFP port.

Key features

• 10 km reach over single-mode fibre (SMF) at a 1310 nm wavelength
• 10GBASE-LR module in SFP+ form factor with a 10.3125 Gbps data rate
• Duplex LC connector with Ultra Physical Contact (UPC) fibre end-face finish
• DDM/DOM data diagnosis capability supported
• Power consumption of 1.5 W or less per module
• Operating temperature range of 0°C to 70°C (32°F to 158°F)

Full specification

What you will need

You need a switch or device with a free 10G SFP+ port and a compatible module at the other end of the link. The link runs over single-mode fibre (SMF) terminated with duplex LC connectors. Tell us the network switch model and we will check the fit before you order.

Buying from Zenith Security Co.

We are a supplier, not an installer. We will go through the XG-SFP-LR-SM1310 with you before you buy — the fibre type and distance, the SFP+ ports at each end and whether a 10 km module suits the link — and depending on your requirements and your area we can recommend a qualified trade installer. We have been operating since 2012 and you can visit our trade counter in Wolverhampton.

What reach does the XG-SFP-LR-SM1310 have?

Ruijie rate it at 10 km over single-mode fibre (SMF), at a wavelength of 1310 nm, using a duplex LC connector.

Will the XG-SFP-LR-SM1310 run in a 1G SFP port?

No. It is a 10G SFP+ module with a 10.3125 Gbps data rate, so it needs a 10G SFP+ port. A 1G-only SFP port will not run it at 10G.

Is the XG-SFP-LR-SM1310 for single-mode or multimode fibre?

Single-mode. Ruijie list the cable type as SMF, so it is not intended for multimode cabling.

Does the XG-SFP-LR-SM1310 report diagnostic data?

Yes. Ruijie list it as data diagnosis-capable (DDM/DOM).

How quickly can I get it?

Delivery is within 1–3 working days to England, Scotland and Wales. We do not ship to Northern Ireland.

Can I collect or see one before buying?

Yes. Our trade counter is at Unit 3, Park View Centre, 243 Dudley Road, Wolverhampton WV2 3JU. Call first so we can confirm the item is there for you.

Questions on specification or compatibility: call 01902 902251, see our FAQ and support pages, or contact us. Trade accounts are available — see trade customers. Browse the full Ruijie Reyee range.