TP-LINK OMADA - SM321B-2 - Gigabit Single-Mode WDM Bi-Directional SFP Module, 2 km

SM321B-2 — Gigabit Single-Mode WDM Bi-Directional SFP Module, 2 km

The TP-Link Omada SM321B-2 is a gigabit bi-directional WDM SFP module (TX 1310 nm, RX 1550 nm) for a single strand of single-mode fibre, up to 2 km. Use it with the SM321A-2. It plugs into an SFP slot on a switch, router or media converter to add a fibre link.

What the SM321B-2 is for

An SFP module like the SM321B-2 lets you choose the link type per port on an Omada network switch. Typical jobs are linking a switch in an outbuilding, a second floor or a CCTV cabinet back to the core switch, where a copper run would be too long.

TP-Link list DDM, hot-swap support and SFP-MSA compliance for the SM321B-2, so it can be fitted or replaced without powering the switch down. The module at the other end must be its BiDi partner, the SM321A-2.

Key features

• 1.25 Gbps gigabit WDM bi-directional SFP, IEEE 802.3z
• TX 1310 nm / RX 1550 nm over 9/125 μm single-mode fibre
• Uses one fibre strand, LC simplex connector
• Up to 2 km maximum cable length
• Pairs with the SM321A-2 at the far end
• DDM, SFP-MSA compliant and hot-swappable

Full specification

What you will need

You need a free SFP slot on your switch or media converter, an SM321A-2 at the far end, and the right cable: 9/125 μm single-mode fibre (single strand), LC simplex connectors. See our data networking range for switches and cabling.

Buying from Zenith Security Co.

We are a supplier, not an installer. We will go through the SM321B-2 with you before you buy (the slot type on your switch, the fibre or cable you have and the distance) and depending on your requirements and your area we can recommend a qualified trade installer. We have been operating since 2012 and you can visit our trade counter in Wolverhampton.

What fibre or cable does the SM321B-2 use?

TP-Link list it for 9/125 μm single-mode fibre (single strand) with an LC simplex connector, at TX 1310 nm / RX 1550 nm.

How far can the SM321B-2 reach?

TP-Link quote a maximum cable length of 2 km.

Which TP-Link switches is the SM321B-2 compatible with?

It fits a 1G SFP slot, for example the SFP slots on the Omada SG2428P switch, or the SFP slot on the MC220L media converter. TP-Link publish an Omada compatibility list, or send us your switch model and we will check.

Is the SM321B-2 hot-swappable and does it support DDM?

Yes. TP-Link list it as hot-swappable, with DDM (digital diagnostic monitoring) and SFP-MSA compliance.

Do I need a pair of SM321B-2 modules?

No. The SM321B-2 is one half of a bi-directional (BiDi) WDM pair. It must be used with the SM321A-2 at the other end, over a single strand of single-mode fibre up to 2 km.

How quickly can I get it?

We ship nationally from our multi-million pound warehouse, with orders leaving daily. Orders placed before 2:30pm are normally dispatched for delivery within 1–2 working days to England, Scotland and Wales. You can also collect in store from our trade counter. Call first so we can confirm your order is ready. We do not ship to Northern Ireland.

Can I collect or see one before buying?

Yes. Our trade counter is at Unit 3, Park View Centre, 243 Dudley Road, Wolverhampton WV2 3JU. Call first so we can confirm the item is there for you.

Questions on specification or compatibility: call 01902 902251, see our FAQ and support pages, or contact us. Trade accounts are available, see trade customers. Browse the full TP-Link range.

Official TP-Link VAR Partner: Zenith Security Co is listed on TP-Link's UK where-to-buy page as a VAR Partner, so this is genuine UK-supplied TP-Link equipment. See our full TP-Link range.