HIKVISION - DS-KAW150-4N - 48 VDC 150 W Power Supply for 2-Wire HD Video Intercom Distributors

Hikvision DS-KAW150-4N — 48 VDC 150 W power supply for 2-wire HD distributors

The DS-KAW150-4N answers the question every 2-wire HD installer asks first: what powers the distributor? The DS-KAD7060EY takes 48 VDC and feeds up to six two-wire channels; Hikvision lists this 48 VDC, 3.2 A, 150 W supply in the same 2-wire HD product tree. With 150 W available it covers the distributor's rated channel loads (CH1–CH2 under 15 W each, CH3–CH6 under 110 W combined) with headroom. It is not for the 2-wire IP (Y series) DS-KAD706Y, which runs on 24 VDC.

This is part of Hikvision's IP video intercom range: door stations, indoor stations and accessories that connect over a standard network (PoE or 12 VDC) and are configured with the iVMS-4200 client or the Hik-Connect app. IP-series products are designed to be used together within that range. If you are adding to an existing system, tell us what is installed and we will confirm what fits before you order.

Electrical

Universal mains input from 100 to 240 VAC; regulated output of 48 VDC at up to 3.2 A (150 W) with noise and ripple below 150 mVpp at 25 °C. Cooling is by convection — no fan — so it can sit in a riser cupboard or enclosure without noise.

Environment and size

Operating -10 °C to +70 °C, storage -25 °C to +85 °C, humidity below 95% non-condensing. The unit measures 105 × 90 × 54.5 mm. One line of Hikvision's datasheet ("Voltage Adjustment Range 23 VDC to 25 VDC") contradicts the 48 VDC output and has been left out of our table rather than corrected — ask us if you need the adjustment range confirmed.

DS-KAW150-4N technical specification

What you'll need with it

• A DS-KAD7060EY or DS-KAD7060EY-S 2-wire HD distributor to power
• A mains outlet or fused spur in the enclosure
• For the 2-wire IP (Y series) DS-KAD706Y use a 24 VDC supply instead — ask us

Frequently asked questions

Which distributor is the DS-KAW150-4N for?

The 48 VDC 2-wire HD (EY series) distributors — DS-KAD7060EY and DS-KAD7060EY-S. Hikvision publishes it in the same 2-wire HD tree.

Can I use it with the DS-KAD706Y?

No — the DS-KAD706Y (2-wire IP, Y series) runs on 24 VDC. This is a 48 VDC supply.

Is it fan cooled?

No — convection cooled, so silent.

What input does it take?

100 to 240 VAC.

How much power does a DS-KAD7060EY need?

Its datasheet rates CH1–CH2 under 15 W each and CH3–CH6 under 110 W combined; 150 W covers that with margin.

Trade pricing

Zenith Security Co is an authorised Hikvision partner supplying genuine UK-specification stock. Prices shown are for trade account holders — contact us for account terms and stock, call 01902 902251, or collect from our Wolverhampton trade counter. Read our Hikvision video intercom buying guide, browse all intercoms, the wider access control range, or the full Hikvision range.