HIKVISION - DS-KD-KK/S - 6-Button Nametag Module for KD8 Modular Door Station, IP65 IK07, Stainless Steel (/S)

Hikvision DS-KD-KK/S — 6-button nametag module, stainless-steel finish, IP65 IK07

The DS-KD-KK/S is the /S-finish version of the DS-KD-KK six-button nametag module for Hikvision's KD8 modular door station. Six labelled call buttons in one module, powered and addressed over RS-485 from the main unit, rated IP65 and IK07 for -40 °C to 55 °C outdoors. The /S suffix is the finish Hikvision uses across the KD8 range for its stainless-steel-fronted units — the DS-KD8005-IME1/S main unit, the DS-KD-K12/S twelve-button module and the DS-KABD8003-RS2/S rain shield — so specify it when the panel is built in stainless. For six flats or fewer it is the smaller alternative to the twelve-button module.

Hikvision's KD8 modular door station is built from a main unit (camera, microphone, speaker and one call button) plus sub-modules that clip into a common frame: nametag buttons, card reader, keypad, display, indicator and induction loop. Modules connect to the main unit over RS-485 and take their 12 VDC from it, so a panel for a block of flats is specified module by module. Tell us the flat count and the entrance and we will draw up the frame, modules and rain shield.

This is part of Hikvision's IP video intercom range: door stations, indoor stations and accessories that connect over a standard network (PoE or 12 VDC) and are configured with the iVMS-4200 client or the Hik-Connect app. IP-series products are designed to be used together within that range. If you are adding to an existing system, tell us what is installed and we will confirm what fits before you order.

Building the panel

Count the flats, subtract the one button on the main unit, and choose six- or twelve-button modules to cover the rest; then a frame and rain shield to suit. Modules take 12 VDC and RS-485 from the main unit through the supplied cables, so there is no wiring beyond the frame. Each button is mapped to a flat's indoor station (or Hik-Connect account) during commissioning.

Outdoor rated

IP65 sealing and IK07 impact resistance, -40 °C to 55 °C, 10% to 95% humidity. The module measures 98.5 × 100 × 34.2 mm and mounts flush or on the surface within the KD8 frame. Consumption is 0.8 W.

DS-KD-KK/S technical specification

What you'll need with it

• A KD8 main unit — DS-KD8005-IME1/S for a stainless panel, or the DS-KD8005-IME1
• A frame and rain shield for the module count — 2-module DS-KABD8003-RS2/S or 3-module DS-KABD8003-RS3/S
• The module-connecting cables supplied with the frame; RS-485 and 12 VDC come from the main unit
• An indoor station or Hik-Connect account per flat

Frequently asked questions

How many flats can a DS-KD-KK/S serve?

Six per module. The main unit adds one more button, and modules chain — a main unit plus one six-button module covers seven flats.

What is the difference from the DS-KD-KK?

The finish: /S is Hikvision's stainless-steel version, to match the DS-KD8005-IME1/S main unit. The published specification is otherwise the same module.

Does each button need wiring?

No — the module connects to the main unit over RS-485 and 12 VDC through the module cable; buttons are assigned in software.

Is it weatherproof?

IP65 and IK07, -40 °C to 55 °C, listed by Hikvision for outdoor use.

Can I mix it with a keypad or card-reader module?

Yes — the DS-KD-KP/S keypad and DS-KD-E reader use the same frame and bus.

Trade pricing

Zenith Security Co is an authorised Hikvision partner supplying genuine UK-specification stock. Prices shown are for trade account holders — contact us for account terms and stock, call 01902 902251, or collect from our Wolverhampton trade counter. Browse all intercoms, the wider access control range, or the full Hikvision range.