HIKVISION - DS-KD-K12/S - 12-Button Nametag Module for KD8 Modular Door Station, IP65, Stainless Steel (/S)

Hikvision DS-KD-K12/S — 12-button nametag module, stainless-steel finish

The DS-KD-K12/S is the /S-finish version of the DS-KD-K12. Hikvision publishes matching datasheets for the two; the /S suffix is the finish Hikvision uses across the KD8 range for its stainless-steel-fronted units (the DS-KD8005-IME1/S main unit), so specify this module when the panel is built around an /S main unit and stainless rain shield.

Hikvision's KD8 modular door station is built from a main unit (camera, microphone, speaker and one call button) plus sub-modules that clip into a common frame: nametag buttons, card reader, keypad, display, indicator and induction loop. Modules connect to the main unit over RS-485 and take their 12 VDC from it, so a panel for a block of flats is specified module by module. Tell us the flat count and the entrance and we will draw up the frame, modules and rain shield.

This is part of Hikvision's IP video intercom range: door stations, indoor stations and accessories that connect over a standard network (PoE or 12 VDC) and are configured with the iVMS-4200 client or the Hik-Connect app. IP-series products are designed to be used together within that range. If you are adding to an existing system, tell us what is installed and we will confirm what fits before you order.

Building the panel

Count the flats, subtract the one button on the main unit, and divide by twelve to get the module count; then choose a frame and rain shield to suit. Modules take 12 VDC and RS-485 from the main unit through the supplied cables, so there is no wiring beyond the frame. Each button is mapped to a flat's indoor station (or Hik-Connect account) during commissioning.

Outdoor rated

IP65 sealing with a -30 °C to 55 °C operating range and 10% to 90% humidity. The module measures 98.2 × 100.2 × 33.7 mm and mounts flush or on the surface within the KD8 frame. Consumption is ≤ 2 W.

DS-KD-K12 technical specification

What you'll need with it

• A KD8 main unit — DS-KD8005-IME1 (5 MP) or the DS-KD8003-IME1 already on the site
• A mounting frame and rain shield for the module count — 1-, 2- or 3-module DS-KABD8003-RS3 series
• The module-connecting cables supplied with the frame; RS-485 and 12 VDC come from the main unit
• An indoor station or Hik-Connect account per flat

Frequently asked questions

How many flats can a DS-KD-K12 serve?

Twelve per module. The main unit adds one more button, and modules chain — two modules give 25 flats in total.

Does each button need wiring?

No — the module connects to the main unit over RS-485 and 12 VDC through the module cable; buttons are assigned in software.

What is the /S version?

This is the /S version — Hikvision's stainless-steel finish, to match the DS-KD8005-IME1/S main unit.

Is it weatherproof?

IP65, -30 °C to 55 °C.

Can I mix it with a card reader or indicator module?

Yes — the DS-KD-E reader and DS-KD-IN indicator use the same frame and bus.

Trade pricing

Zenith Security Co is an authorised Hikvision partner supplying genuine UK-specification stock. Prices shown are for trade account holders — contact us for account terms and stock, call 01902 902251, or collect from our Wolverhampton trade counter. Read our Hikvision video intercom buying guide, browse all intercoms, the wider access control range, or the full Hikvision range.