HIKVISION - DS-KD7003EY-IME2/Aluminum - 2-Wire HD Modular Door Station, Aluminium Finish, 2 MP, IP65 IK08
Product Features
Main unit of Hikvision's 2-wire HD (EY series) modular door station. A 2 MP camera with a 133° horizontal view and IR illumination, two-way audio with echo cancellation, and 0–2 call buttons in an IP65 / IK08 housing rated from -40 °C to 60 °C. Powered at 48 V over the two-wire bus from a DS-KAD7060EY distributor, or from 12 VDC.
- 2 MP camera, horizontal 133° / vertical 82°, WDR, IR supplement light
- Two lock outputs: 1 relay (30 VDC, 2 A) and 1 DC pulse output
- 2 alarm inputs (exit button / door contact), tamper, 2 × RS-485 for sub-modules
- Up to 400 indoor stations, 16 sub door stations, 2000 users
- IP65, IK08; surface or flush mount; 99.5 × 98.5 × 35 mm
Hikvision DS-KD7003EY-IME2/Aluminum — 2-wire HD modular door station, aluminium finish
The DS-KD7003EY-IME2/Aluminum is the aluminium-finish version of the DS-KD7003EY-IME2 2-wire HD door station. Hikvision publishes one datasheet for the model, which the finish does not change; the specification below is that datasheet, and it is the same door station supplied in the DS-KIS704EY/Aluminum kit.
The DS-KD7003EY-IME2 is the camera-and-call main module of Hikvision's 2-wire HD (EY series) door entry system. It puts a 2 MP wide-angle camera, IR night illumination, two-way audio and up to two call buttons at the entrance, and it connects to the building over a single two-core cable from the DS-KAD7060EY distributor, which also powers it at 48 V. A 12 VDC input is provided as an alternative.
Hikvision's current 2-wire range comes in two families that use different buses: the 2-wire IP (Y) series and the 2-wire HD (EY) series. Distributors, door stations and indoor stations are designed to be used within their own family. If you are extending an existing 2-wire system, tell us what is installed and we will confirm what fits.
Picture and sound at the door
The 2 MP sensor covers 133° horizontally and 82° vertically — wide enough to see a visitor standing to the side of the panel, or a parcel left on the step. WDR keeps faces readable against a bright sky behind them, and the IR supplement light takes over after dark. The microphone and loudspeaker are built in, with noise suppression and echo cancellation so the conversation is clear on a busy street. Video is H.264 over the 2-wire HD link.
Two ways to release the door
Unusually for a door station, this unit has two independent lock outputs: a relay rated to 30 VDC 2 A for a conventional strike or maglock supply, and a DC pulse output (20 V 4 A impulsive, 300 mA holding, 30 Ω max) that can drive a suitable electric strike directly. Two alarm inputs take an exit button and a door contact, and a tamper switch reports if the panel is removed. Note that the datasheet lists no separate alarm output.
Modular and scalable
Two RS-485 ports — one for Hikvision sub-modules such as extra call buttons or a keypad, one reserved — let the panel grow into a multi-button or code-entry station. Capacity is generous: up to 400 linked indoor stations, 16 sub door stations and 2000 users, with a six-decimal DIP switch for addressing. The 4 GB ROM / 256 MB RAM platform runs embedded Linux with a 19-language interface.
Built for outside
IP65 against rain and dust, IK08 against impact, and a working range of -40 °C to 60 °C. Four LEDs (door open, calling, intercom, in use) give the visitor feedback. Surface or flush mounting; 99.5 × 98.5 × 35 mm; consumption ≤ 6 W. Wi-Fi is present only as an access point for configuration, not for the intercom link.
DS-KD7003EY-IME2 technical specification
| Camera and video | |
|---|---|
| Camera | 2 MP, 1 lens |
| Field of view | Horizontal 133°, vertical 82° |
| WDR | Supported |
| Supplement light | Low illumination, IR supplement lights |
| Video standard | H.264 |
| Audio | |
| Audio | Built-in omnidirectional microphone and loudspeaker; G.711 U/A at 64 Kbps; noise suppression and echo cancellation; adjustable volume |
| Capacity | |
| User capacity | 2000 |
| Linked indoor stations | Max. 400 |
| Sub door stations | 16 |
| Network | |
| Wired network | 10/100 Mbps self-adaptive through the 2-wire interface |
| Wi-Fi | AP mode for configuration only |
| Two-wire IP interface | 1 |
| Interfaces | |
| Alarm inputs | 2 (exit button or door contact) |
| Tamper | 1 |
| Exit button | 1 |
| Door contact input | 1 |
| RS-485 | 2 (1 for Hikvision sub-module communication, 1 reserved) |
| DIP switch | 6-decimal |
| Lock control | 2 — 1 relay (max 30 VDC, 2 A) and 1 DC pulse output (20 V 4 A impulsive, 300 mA holding, 30 Ω max) |
| Buttons | 0–2 (flexible) |
| Indicators | 4 LEDs (door open, calling, intercom, in use) |
| General | |
| Power | 48 V from DS-KAD7060EY distributor, or 12 VDC |
| Power consumption | ≤ 6 W |
| Installation | Surface or flush mounting |
| Protection | IP65, IK08 |
| Working temperature | -40 °C to 60 °C |
| Working humidity | 10% to 90% |
| Dimensions | 99.5 × 98.5 × 35 mm |
| System | Embedded Linux; 4 GB ROM, 256 MB RAM |
| Application | Outdoor |
| Model | DS-KD7003EY-IME2/Aluminum |
What you'll need with it
- A DS-KAD7060EY distributor to power it at 48 V over the two-wire bus (or a 12 VDC supply at the door)
- EY-series indoor stations — DS-KH7300EY-TE2 or DS-KH7300EY-WTE2
- An electric strike or maglock on the relay or DC pulse output
- A surface or flush mounting frame, and Hikvision sub-modules if more buttons or a keypad are wanted
The standard-finish unit is listed as the DS-KD7003EY-IME2. For a single dwelling the DS-KIS704EY kit bundles the EY components.
Frequently asked questions
What is different about the /Aluminum version?
The front finish only — aluminium rather than the standard finish. Camera, audio, lock outputs, capacity and the 48 V EY-series bus are identical to the DS-KD7003EY-IME2.
Is this the same as the DS-KD8003Y-IME2?
No. The DS-KD8003Y-IME2 is the 2-wire IP (Y series) door station powered from a DS-KAD706Y. This DS-KD7003EY-IME2 is the 2-wire HD (EY series) unit powered from a DS-KAD7060EY. Pick the family first.
How is it powered?
At 48 V over the two-wire bus from the DS-KAD7060EY distributor, or from a local 12 VDC supply. Consumption is ≤ 6 W.
Can it release two doors?
It has two lock outputs — one relay (max 30 VDC, 2 A) and one DC pulse output — so it can drive two locks or give you a choice of lock type.
How many buttons does it have?
0 to 2 call buttons on the main unit. More buttons or a keypad are added as Hikvision sub-modules over RS-485.
Trade pricing
Zenith Security Co is an authorised Hikvision partner supplying genuine UK-specification stock. Prices shown are for trade account holders — contact us for account terms and stock, call 01902 902251, or collect from our Wolverhampton trade counter. Browse all intercoms, the wider access control range, or the full Hikvision range.
| Product Code | DS-KD7003EY-IME2/Aluminum |
|---|---|
| Manufacturer | Hikvision |
| Video Compression | H.264 |
| Audio I/O | Built-in omnidirectional microphone and loudspeaker; G.711 U/A |
| Alarm I/O | 2 alarm inputs (exit button / door contact); tamper |
| Interface | 1 two-wire IP interface; 2 × RS-485; 6-decimal DIP switch |
| Protection Level, Ingress Protection | IP65, IK08 |
| Power | 48 V from DS-KAD7060EY distributor, or 12 VDC; ≤ 6 W |
| Operating Temperature | -40 °C to 60 °C |
| Humidity | 10% to 90% |
RELATED PRODUCTS
TECHNICAL SUPPORT
We provide tailored support for you and your CCTV system.
3 YEAR WARRANTY
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
COME & VISIT US
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
FREE DELIVERY OVER £ 149.99
As cheap as £10, we will deliver your order 3 to 5 working days!