RUIJIE - RG-AP880-L - Wi-Fi 6E Tri-Radio Indoor Access Point, 7.780 Gbps
Product Features
Ruijie RG-AP880-L is a tri-radio Wi-Fi 6E indoor access point with 2.4, 5 and 6 GHz radios and a combined peak of 7.780 Gbps. Ruijie state a DC power adapter is delivered with the unit.
RG-AP880-L — Wi-Fi 6E Tri-Radio Indoor Access Point, 7.780 Gbps
The Ruijie RG-AP880-L is a tri-radio Wi-Fi 6E indoor access point. It has 2x2 radios on 2.4 GHz and 5 GHz and a 4x4 radio on 6 GHz, with a 5GBASE-T port, a 5GE SFP/RJ45 combo port whose SFP slot is shared with an RJ45 port, and a Gigabit port.
What the RG-AP880-L is for
Ruijie recommend the RG-AP880-L for indoor scenarios covering higher education, government, general education, finance and business. The radios reach up to 574 Mbps on 2.4 GHz, 2.402 Gbps on 5 GHz and 4.804 Gbps on 6 GHz, for a combined peak of 7.780 Gbps across up to eight spatial streams. The 6 GHz radio is 802.11ax only, so older devices will use the 2.4 or 5 GHz radios.
It supports up to 1536 associated clients, varying with the environment, with a recommended maximum of 300 active devices and up to 45 BSSIDs. Fat, Fit and Cloud modes are available, with management through Ruijie Cloud or Eweb.
On 802.3bt PoE++ it operates with optimal performance (40 W). On 802.3at it draws 23 W, and on 802.3af each radio works in one spatial stream mode.
Key features
- 2x2 MU-MIMO on 2.4 GHz and 5 GHz plus 4x4 MU-MIMO on 6 GHz, for up to eight spatial streams
- Up to 574 Mbps on 2.4 GHz, 2.402 Gbps on 5 GHz and 4.804 Gbps on 6 GHz, 7.780 Gbps combined
- Ports: 1 x 100/1000/2.5G/5GBASE-T, 1 x 5GE SFP/RJ45 combo (1GE and 2.5GE modules) and 1 x 10/100/1000BASE-T
- Powered by 802.3af/at/bt PoE or the supplied DC adapter, with optimal performance on 802.3bt PoE++
- When fed by 802.3bt PoE++, the LAN 2 port can power an IoT unit at 48 V/12.95 W
- Switchable Fat, Fit and Cloud modes, with Ruijie Cloud and web-based (Eweb) management
Full specification
| Unit dimensions (W x D x H) | 230 mm x 230 mm x 51 mm (9.06 in. x 9.06 in. x 2.01 in.) |
| Unit weight | Main unit: 1.0 kg (2.20 lbs); Mounting bracket: 0.1 kg (0.22 lbs) |
| Mounting | Wall/Ceiling-mount (a mounting bracket is delivered with the main unit) |
| Lock option | Kensington lock and securing latch |
| Radio design | Tri-radio and up to eight spatial streams: Radio 1: 2.4GHz: Two spatial streams, 2x2 MU-MIMO; Radio 2: 5GHz: Two spatial streams, 2x2 MU-MIMO; Radio 3: 6GHz: Four spatial streams, 4x4 MU-MIMO |
| Data rates | Combined peak data rate: 7.780 Gbps; Radio 1: 2.4 GHz, 574 Mbps; Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to 2SS HE40 802.11ax client devices (maximum); Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to 2SS HE20 802.11ax client devices (typical); Radio 2: 5 GHz, 2.402 Gbps; Two spatial stream Single User (SU) MIMO for up to 2.402 Gbps wireless data rate to individual 4SS HE160 802.11ax client devices (maximum); Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical); Radio 3: 6 GHz, 4.804 Gbps; Four spatial stream Single User (SU) MIMO for up to 4.804 Gbps wireless data rate to individual 4SS HE160 802.11ax client devices (maximum); Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical); Four spatial stream Multi User (MU) MIMO for up to 4.804 Gbps wireless data rate to up to four 1SS or two 2SS HE160 802.11ax DL-MU-MIMO capable client devices simultaneously (maximum); Four spatial stream Multi User (MU) MIMO for up to 2.402 Gbps wireless data rate to up to four 1SS or two 2SS HE80 802.11ax DL-MU-MIMO capable client devices simultaneously (typical) |
| Antenna type | Built-in omnidirectional antennas (two 2.4 GHz antennas, two 5 GHz antennas and four 6 GHz antennas) |
| Antenna gain | 2.4 GHz: 5 dBi; 5 GHz: 5 dBi; 6 GHz: 5 dBi |
| Maximum transmit power | 2.4 GHz: 27 dBm (24dBm per chain); 5 GHz: 26 dBm (23dBm per chain); 6 GHz: 26 dBm (23dBm per chain); Note: The transmit power is limited by local regulatory requirements. For details, see WLAN Country or Region Codes and Channel Compliance.; Thailand; 2.400 GHz to 2.4835 GHz, EIRP ≤ 20 dBm; 5.150 GHz to 5.350 GHz, EIRP ≤ 23 dBm; 5.470 GHz to 5.725 GHz, EIRP ≤ 30 dBm; 5.725 GHz to 5.825 GHz, EIRP ≤ 30 dBm; 5.945 GHz to 6.425 GHz, EIRP ≤ 23 dBm; Vietnam:; 2400-2483.5 MHz, EIRP ≤ 23 dBm; 5150-5350 MHZ, EIRP ≤ 23 dBm; 5470-5725 MHz, EIRP ≤ 30 dBm; 5725-5850 MHz, EIRP ≤ 30 dBm |
| Power increment | Configurable in increments of 1 dBm |
| Bluetooth | Bluetooth 5.1 |
| Antenna type | Integrated vertically polarized omnidirectional antenna |
| Maximum antenna gain | 4.6 dBi, with roughly 30 degrees downtilt |
| Maximum transmit power | 10 dBm (Class 1) |
| Fixed service port | 1 x 100/1000/2.5G/5GBASE-T port; Auto MDI/MDIX crossover; NBASE-T/IEEE802.3bz-compliant 5 Gbps; PoE-PD: 54 V DC (nominal) 802.3af/at/bt(Class 3 or higher); 802.3az EEE; 1 x 5GE SFP/RJ45 combo port, compatibility with 1GE and 2.5GE modules; 1 x 10/100/1000BASE-T port; Supplying 48 V/12.95 W power to an IoT unit; Auto MDI/MDIX crossover; 802.3az EEE |
| Fixed management port | 1 x RJ45 console port (serial console port) |
| USB | USB 3.0 (Type-A connector) |
| Button | 1 x Reset button; Press the button for shorter than 2 seconds. Then the device restarts.; Press the button for longer than 5 seconds. Then the device restores to factory settings. |
| Input power supply | The AP supports the following two power supply modes: 54 V DC/1.1 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter is delivered with the main unit.; PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af/at/bt standard (PoE/PoE+/PoE++).; Note: If both DC power and PoE are available, DC power is preferred.; When powered by 802.3bt (PoE++), the AP operates with the optimal performance.; When powered by 802.3at (PoE+), the AP starts up normally. LAN 2 and USB port cannot supply power to external devices.; When powered by 802.3af (PoE), the AP starts up normally. 2.4 GHz, 5 GHz and 6 GHz radio cards can work only in one spatial stream mode. LAN 2 and USB port cannot supply power to external devices. |
| PoE port | When powered by 802.3bt (PoE++), the LAN 2 port can source 48 V/12.95 W power to an IoT unit. |
| USB port | When powered by 802.3bt (PoE++), the USB port can source 1 A/5 W power to an attached device. |
| Overall power consumption | Maximum power consumption: 40 W; DC powered: 40 W; PoE powered (802.3af): 12.95 W; PoE+ powered (802.3at): 23 W; PoE++ powered (802.3bt): 40 W; Idle mode: 10.3 W |
| Temperature | Operating temperature: –10°C to 50°C (14°F to 122°F); Storage temperature: –40°C to 70°C (–40°F to +158°F); Note: At an altitude in the range of 3,000–5,000 m (9,842.52–16,404.20 ft.), every time the altitude increases by 220 m (722 ft.), the maximum temperature decreases by 1°C (1.8°F). |
| Humidity | Operating humidity: 5% to 95% (non-condensing); Storage humidity: 5% to 95% (non-condensing) |
| Mean Time Between Failure (MTBF) | 394,941 hours (45 years) at the operating temperature of 25°C (77°F) |
| Recommended maximum number of active devices per AP | 300 |
| Maximum number of associated clients | 1536; Note; The number of associated clients varies according to the environment. |
| Maximum number of BSSIDs | 45 (up to 15 BSSIDs per radio) |
| STA management | SSID hiding; Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently.; Remote intelligent perception technology (RIPT); Intelligent client identification technology; Intelligent load balancing based on the STA quantity or traffic |
| STA limiting | SSID-based STA limiting; Radio-based STA limiting |
| Bandwidth limiting | STA/SSID/AP-based rate limiting |
| Wireless roaming | Layer 2 and Layer 3 roaming |
The table shows the hardware specification. Ruijie publish the full software feature list on the datasheet; ask us if you need a particular protocol or feature confirmed.
What you will need
Ruijie state a 54 V DC/1.1 A power adapter is delivered with the main unit, so you can power it from that, or from 802.3af/at/bt PoE switches; 802.3bt gives full performance. If you plan to use the SFP side of the combo port you need a 1GE or 2.5GE SFP module. Ruijie note each AP occupies one wireless controller licence; see access controllers.
Buying from Zenith Security Co.
We are a supplier, not an installer. We will go through the RG-AP880-L with you before you buy — the PoE class you will power it from, your 6 GHz client devices and the switch ports it will connect to — and depending on your requirements and your area we can recommend a qualified trade installer. We have been operating since 2012 and you can visit our trade counter in Wolverhampton.
Is a power adapter included with the RG-AP880-L?
Ruijie state a DC power adapter is delivered with the main unit. It can also be powered by 802.3af/at/bt PoE, with DC power preferred if both are connected.
What ports does the RG-AP880-L have?
One 100/1000/2.5G/5GBASE-T port, one 5GE SFP/RJ45 combo port that takes 1GE and 2.5GE modules (the SFP slot is shared with an RJ45 port), one 10/100/1000BASE-T port, a USB 3.0 port and an RJ45 console port.
What is the maximum power draw of the RG-AP880-L?
40 W maximum. That is 12.95 W on 802.3af, 23 W on 802.3at and 40 W on 802.3bt or DC.
How many clients does the RG-AP880-L support?
Up to 1536 associated clients depending on the environment, with a recommended maximum of 300 active devices.
How quickly can I get it?
Delivery is within 1–3 working days to England, Scotland and Wales. We do not ship to Northern Ireland.
Can I collect or see one before buying?
Yes. Our trade counter is at Unit 3, Park View Centre, 243 Dudley Road, Wolverhampton WV2 3JU. Call first so we can confirm the item is there for you.
Questions on specification or compatibility: call 01902 902251, see our FAQ and support pages, or contact us. Trade accounts are available — see trade customers. Browse the full Ruijie Reyee range.
| Product Code | RG-AP880-L |
|---|---|
| Dimensions | 230 mm x 230 mm x 51 mm |
| Manufacturer | Ruijie Reyee |
| Colour | White |
| Connection Type | Wireless |
TECHNICAL SUPPORT
We provide tailored support for you and your CCTV system.
3 YEAR WARRANTY
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
COME & VISIT US
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
FREE DELIVERY OVER £ 149.99
As cheap as £10, we will deliver your order 3 to 5 working days!
