HIKVISION - DS-KH7300EY-TE2/White - 7" Touch Screen 2-Wire HD Video Intercom Indoor Station, White
Product Features
7-inch touch-screen indoor station for Hikvision's 2-wire HD (EY series) door entry. Answers the door with live video and two-way audio, releases the lock from the screen, and stores call snapshots to microSD. Only 20 mm deep. Powered over the two-wire bus from a DS-KAD7060EY distributor or DS-KAD7061EY splitter — no network cable, no Wi-Fi.
- 7-inch colour TFT capacitive touch screen, 1024 × 600
- Two-way audio with noise suppression and echo cancellation
- Three touch buttons (Answer, Unlock, Hang up); 1 alarm input
- microSD (TF) card slot to 128 GB; 200 call snapshots
- Two-wire in and out ports for daisy-chaining; up to 3 linked extensions
- 190.2 × 138.2 × 20 mm; ≤ 4 W
Hikvision DS-KH7300EY-TE2 — 7-inch 2-wire HD indoor station — white
DS-KH7300EY-TE2/White is the white version of the DS-KH7300EY-TE2. The specification below is Hikvision's datasheet for the DS-KH7300EY-TE2, which the finish does not change. Hikvision publishes one product image for the family, showing the black unit.
The DS-KH7300EY-TE2 is the wired indoor monitor for Hikvision's 2-wire HD (EY series) intercom. A 7-inch capacitive touch screen at 1024 × 600, two-way audio and a microSD slot in a panel just 20 mm deep, fed with power and video over a single two-core cable from the DS-KAD7060EY distributor or a DS-KAD7061EY splitter. It has no Wi-Fi: for a station that also joins the home network, choose the DS-KH7300EY-WTE2.
Hikvision's current 2-wire range comes in two families that use different buses: the 2-wire IP (Y) series and the 2-wire HD (EY) series. Distributors, door stations and indoor stations are designed to be used within their own family. If you are extending an existing 2-wire system, tell us what is installed and we will confirm what fits.
What the resident gets
A press at the door station wakes the screen with live video and rings the built-in speaker. The resident answers with the touch button, talks to the visitor and releases the door with a second touch. Missed calls leave a snapshot — up to 200 on a fitted TF card. Three indicators (power, mute, in use) and a physical reset button complete the front.
Slim, wired, simple
At 190.2 × 138.2 × 20 mm it sits almost flush to the wall on its surface mount. The two-wire interface has an input and an output, so stations in the same flat can be daisy-chained rather than home-run, and up to three indoor extensions can ring together. A single alarm input takes a door contact or panic button. There is also a 12 V DC input on the unit.
Power and consumption
The datasheet specifies power at 48 V from the DS-KAD7060EY distributor or the DS-KAD7061EY splitter, drawing ≤ 4 W in use and ≤ 1 W on standby — the low standby figure matters when several stations share one distributor channel.
TE2 or WTE2?
Same screen, same audio, same bus. The WTE2 adds 2.4 GHz Wi-Fi so the station can reach the router for Hik-Connect app forwarding; this TE2 stays purely on the two-wire bus, which suits blocks where residents' Wi-Fi is not part of the system. The standard-finish unit is listed as the DS-KH7300EY-TE2.
DS-KH7300EY-TE2 technical specification
| Display | |
|---|---|
| Screen | 7-inch colour TFT, capacitive touch |
| Resolution | 1024 × 600 |
| Audio | |
| Audio | 1 built-in omnidirectional microphone, 1 built-in loudspeaker; G.711 U/A at 64 Kbps; noise suppression and echo cancellation; adjustable volume |
| Capacity | |
| Event capacity | 200 captured pictures (with TF card) |
| Linked indoor extensions | 3 |
| Network | |
| Protocols | TCP/IP, RTSP |
| Wired network | 10/100 Mbps self-adaptive through the 2-wire interface |
| Wi-Fi | None |
| Two-wire IP interface | 2 (1 input, 1 output) |
| Interfaces | |
| Alarm input | 1 |
| TF card | Up to 128 GB (SD 2.0 or lower) |
| Power supply input | 12 V DC |
| Buttons | 3 touch buttons (Answer, Unlock, Hang up) + 1 physical reset button |
| Indicators | 3 (Power, Mute, In use) |
| General | |
| Power | 48 V, powered by DS-KAD7060EY or DS-KAD7061EY |
| Power consumption | ≤ 4 W (standby ≤ 1 W) |
| Installation | Surface mounting |
| Working temperature | -10 °C to 50 °C |
| Working humidity | 10% to 90% (non-condensing) |
| Dimensions | 190.2 × 138.2 × 20 mm |
| System | Embedded Linux; 32 MB ROM, 128 MB RAM |
| Application | Indoor |
| Model | DS-KH7300EY-TE2/White(O-STD) |
What you'll need with it
- A DS-KAD7060EY distributor (or a DS-KAD7061EY splitter off one of its channels) to power it
- An EY-series door station — the DS-KD7003EY-IME2
- Two-core cable to the station position
- A microSD card if snapshots are to be kept on the unit
For a single dwelling the DS-KIS704EY kit bundles the EY components together.
Frequently asked questions
What is different about the /White version?
The finish only. It is the same DS-KH7300EY-TE2 indoor station with a white front. Hikvision's model code for it is DS-KH7300EY-TE2/White(O-STD).
Does it need a network cable or Wi-Fi?
Neither. It is powered and connected over the two-wire bus. It has no Wi-Fi radio — the DS-KH7300EY-WTE2 is the Wi-Fi version.
What powers it?
48 V over the two-wire bus from a DS-KAD7060EY distributor or DS-KAD7061EY splitter, per the datasheet. It also has a 12 V DC input. Consumption is ≤ 4 W.
Can it release the door?
Yes — the Unlock touch button releases the lock controlled by the door station.
How many stations can I have in one flat?
Up to three linked indoor extensions; the two-wire in/out ports let them be chained.
Trade pricing
Zenith Security Co is an authorised Hikvision partner supplying genuine UK-specification stock. Prices shown are for trade account holders — contact us for account terms and stock, call 01902 902251, or collect from our Wolverhampton trade counter. Browse all intercoms, the wider access control range, or the full Hikvision range.
| Product Code | DS-KH7300EY-TE2/White(O-STD) |
|---|---|
| Manufacturer | Hikvision |
| Audio I/O | Built-in omnidirectional microphone and loudspeaker; G.711 U/A |
| Alarm I/O | 1 alarm input |
| Interface | 2 two-wire IP interfaces (1 in, 1 out); 12 V DC input |
| Power | 48 V from DS-KAD7060EY or DS-KAD7061EY; ≤ 4 W (standby ≤ 1 W) |
| Operating Temperature | -10 °C to 50 °C |
| Humidity | 10% to 90% (non-condensing) |
RELATED PRODUCTS
TECHNICAL SUPPORT
We provide tailored support for you and your CCTV system.
3 YEAR WARRANTY
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
COME & VISIT US
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
FREE DELIVERY OVER £ 149.99
As cheap as £10, we will deliver your order 3 to 5 working days!