A Wi-Fi 6 AX3200 dual-band ceiling access point with 4x4 radios on both bands, rated 2401 Mbps on 5 GHz and 800 Mbps on 2.4 GHz, with a 2.5 Gbps uplink port. It draws up to 25.4 W, so it needs a PoE+ (802.3at) port or a 12 V DC adapter; no adapter is listed in the box.
The Ruijie Reyee RG-RAP2260(E) is a dual-radio Wi-Fi 6 ceiling access point with eight spatial streams, running 4x4 MU-MIMO on 5 GHz at up to 2401 Mbps and 4x4 MIMO on 2.4 GHz at up to 800 Mbps. A 2.5 Gbps Ethernet port carries the wired uplink.
Ruijie position the RG-RAP2260(E) for high-density environments. Its eight spatial streams are split four and four between the bands, with four built-in omnidirectional antennas for each, and the specification gives a hardware maximum of 256 associated clients (64 on 2.4 GHz, 256 on 5 GHz). That is a ceiling, not a design figure: active users share the radio rates of 2401 Mbps on 5 GHz and 800 Mbps on 2.4 GHz.
The uplink port is 10/100/1000/2500BASE-T, so on a multi-gigabit port of a network switch the wired side runs at 2.5 Gbps, and on an ordinary Gigabit switch it runs at 1 Gbps. A second 10/100/1000 port is also fitted. Ruijie list Reyee Mesh technology and free cloud management for this model.
It is an indoor unit, rated IP41 for 0°C to 40°C, for ceiling or wall mounting. If 4x4 radios are more than the site needs, the RG-RAP2260 is the 2x2 AX3000 model and draws up to 18 W rather than 25.4 W.
| Product Type | Ceiling AP |
| Radio design | Dual-radio; 8 spatial streams; 2.4 GHz: 4 x 4, MIMO; 5 GHz: 4 x 4, MU-MIMO |
| Maximum wireless data rate | 3201 Mbps |
| 5 GHz wireless data rate | 2401 Mbps |
| 2.4 GHz wireless data rate | 800 Mbps |
| Antenna | 2.4 GHz: 4 built-in omnidirectional antennas; 5 GHz: 4 built-in omnidirectional antennas |
| Product dimensions (W x D x H) | 220 mm x 220 mm x 35 mm (8.66 in. x 8.66 in. x 1.38 in.) (excluding the mounting bracket) |
| Color | White |
| Weight | ≤ 0.55 kg (1.21 lbs.) (without packaging materials) |
| Number of 10/100/1000BASE-T ports | 1 |
| Number of 10/100/1000/2500BASE-T ports | 1 |
| Power supply | DC power adapter; PoE+; Note: If both the DC power adapter and PoE/PoE+ are available for power supply, the DC power adapter is preferred. |
| Local power supply | Yes, one DC power connector (12 V, 2.5 A) |
| Dimensions of the DC connector | Outer diameter: 5.5 mm (0.22 in.); Inner diameter: 2.1 mm (0.08 in.); Depth: 10 mm (0.39 in.) |
| Maximum power consumption | 25.4 W |
| Operating temperature | 0°C to 40°C (32°F to 104°F) |
| Mounting options | Ceiling/Wall |
| IP rating | IP41 |
| Maximum number of associated wireless clients | 64 (2.4 GHz); 256 (5 GHz); 256 (2.4 GHz and 5 GHz enabled) |
| Maximum number of devices that can be managed | 300 |
| IPv6 | Yes |
| In the box | 1 x Mounting Bracket, 2 x Cross Pan Head Screw, 2 x Expansion Anchor, 1 x Quick Start Guide, 1 x Warranty Card |
| Package dimensions (W x D x H) | 290 mm x 290 mm x 71 mm |
| Package weight | 1.43kg |
PoE+ is the key requirement. The RG-RAP2260(E) draws up to 25.4 W, well above the 15.4 W of a standard 802.3af port, and Ruijie specify PoE+ for it, so check that your PoE switch or PoE injector supplies 802.3at on the port you plan to use and that the switch's total PoE budget covers every powered device. The alternative is a 12 V, 2.5 A DC adapter (5.5 mm x 2.1 mm connector), which is not listed in the box; Ruijie's packing list shows the mounting bracket, screws, expansion anchors and guide. A 2.5G switch port is needed to run the uplink above 1 Gbps.
We are a supplier, not an installer. We will go through the RG-RAP2260(E) with you before you buy — the PoE+ budget on your switch, whether it has 2.5G ports and how this model compares with the RG-RAP2260 — and depending on your requirements and your area we can recommend a qualified trade installer. We have been operating since 2012 and you can visit our trade counter in Wolverhampton.
PoE+ (802.3at). Its maximum power consumption is 25.4 W, which a standard 802.3af port, at up to 15.4 W, cannot supply. It can alternatively run from a 12 V, 2.5 A DC adapter, which takes priority if both are connected.
The specification gives a hardware maximum of 256 associated wireless clients, with up to 64 on 2.4 GHz and 256 on 5 GHz.
The RG-RAP2260(E) has eight spatial streams (4x4 on each band), rated 2401 Mbps on 5 GHz and 800 Mbps on 2.4 GHz, and draws up to 25.4 W. The RG-RAP2260 is a 2x2 design rated 2401 Mbps and 573 Mbps, drawing up to 18 W. Both have one 2.5 Gbps and one Gigabit Ethernet port.
Ruijie's packing list shows a mounting bracket, two screws, two expansion anchors and a quick start guide, with no power adapter. Use a PoE+ port or injector, or buy a 12 V, 2.5 A adapter with a 5.5 mm x 2.1 mm connector separately.
Yes. Ruijie list ceiling and wall mounting, and a mounting bracket, screws and expansion anchors are in the box. It is rated IP41 with an operating range of 0°C to 40°C, so it is for indoor use.
Delivery is within 1–3 working days to England, Scotland and Wales. We do not ship to Northern Ireland.
Yes. Our trade counter is at Unit 3, Park View Centre, 243 Dudley Road, Wolverhampton WV2 3JU. Call first so we can confirm the item is there for you.
Questions on specification or compatibility: call 01902 902251, see our FAQ and support pages, or contact us. Trade accounts are available — see trade customers. Browse the full Ruijie Reyee range.
| Product Code | RG-RAP2260(E) |
|---|---|
| Dimensions | 220 mm x 220 mm x 35 mm (excluding the mounting bracket) |
| Manufacturer | Ruijie Reyee |
| Colour | White |
| Power Features | DC power adapter or PoE+, max 25.4 W |
| Connection Type | Wireless |
We provide tailored support for you and your CCTV system.
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
As cheap as £10, we will deliver your order 3 to 5 working days!
