A Wi-Fi 6 AX3000 dual-band ceiling access point rated 2401 Mbps on 5 GHz and 573 Mbps on 2.4 GHz, with a 2.5 Gbps uplink port and free cloud management. It draws up to 18 W, so use a PoE+ (802.3at) port or a 12 V DC adapter; no adapter is listed in the box.
The Ruijie Reyee RG-RAP2260 is a dual-radio Wi-Fi 6 access point for ceiling or wall mounting, with 2x2 MU-MIMO on both bands. Ruijie rate it at 2401 Mbps on 5 GHz and 573 Mbps on 2.4 GHz, and fit a 2.5 Gbps Ethernet uplink port alongside a standard Gigabit port.
Ruijie position the RG-RAP2260 for high-density scenarios and quote 500+ client connections; the specification gives a hardware maximum of 512 associated clients (64 on 2.4 GHz, 512 on 5 GHz). Treat that as a ceiling rather than a design figure, because every active client shares the radio rates of 2401 Mbps on 5 GHz and 573 Mbps on 2.4 GHz.
The uplink port is 10/100/1000/2500BASE-T. Connected to a multi-gigabit port on a network switch, the wired side is not held to 1 Gbps; on an ordinary Gigabit switch the same port links at 1 Gbps. The second port is 10/100/1000 only. Of the related models, the RG-RAP2260(E) has 4x4 radios on each band and the RG-RAP2260(H) is the AX6000 model with two 2.5 Gbps ports.
Ruijie's page lists free cloud management with self-organising network (SON), centralised network management, scenario-based configuration, cloud portal authentication and remote monitoring, plus Reyee Mesh for adding an extra access point without cabling. It is an indoor unit, rated IP41, for 0°C to 40°C.
| Product Type | Ceiling AP |
| Radio design | Dual-radio; 4 spatial streams; 2.4 GHz: 2 x 2, MU-MIMO; 5 GHz: 2 x 2, MU-MIMO |
| Maximum wireless data rate | 2974 Mbps |
| 5 GHz wireless data rate | 2401 Mbps |
| 2.4 GHz wireless data rate | 573 Mbps |
| Antenna | 2.4 GHz: 2 built-in omnidirectional antennas; 5 GHz: 3 built-in omnidirectional antennas |
| Product dimensions (W x D x H) | 194 mm x 194 mm x 45.1 mm (7.64 in. x 7.64 in. x 1.78 in.) (excluding the mounting bracket) |
| Color | White |
| Weight | ≤ 0.65 kg (1.43 lbs.) (without packaging materials) |
| Number of 10/100/1000BASE-T ports | 1 |
| Number of 10/100/1000/2500BASE-T ports | 1 |
| Power supply | DC power adapter; PoE/PoE+; Note: If both the DC power adapter and PoE/PoE+ are available for power supply, the DC power adapter is preferred. |
| Local power supply | Yes, one DC power connector (12 V, 2 A) |
| Dimensions of the DC connector | Outer diameter: 5.5 mm (0.22 in.); Inner diameter: 2.1 mm (0.08 in.); Depth: 10 mm (0.39 in.) |
| Maximum power consumption | 18 W |
| Operating temperature | 0°C to 40°C (32°F to 104°F) |
| Mounting options | Ceiling/Wall |
| IP rating | IP41 |
| Maximum number of associated wireless clients | 64 (2.4 GHz); 512 (5 GHz); 512 (2.4 GHz and 5 GHz enabled) |
| Maximum number of devices that can be managed | 300 |
| IPv6 | Yes |
| In the box | 1 x Access Point, 1 x Mounting Bracket, 2 x Cross Pan Head Screw, 2 x Expansion Anchor, 1 x Quick Start Guide, 1 x Warranty Card |
| Package dimensions (W x D x H) | 222 mm x 220 mm x 68 mm |
| Package weight | 0.85 kg |
A power source of the right class comes first. The RG-RAP2260 draws up to 18 W, more than the 15.4 W a standard 802.3af port supplies, so although Ruijie list PoE and PoE+, plan on a PoE+ (802.3at) port on a PoE switch or a PoE+ injector. The alternative is a 12 V, 2 A DC adapter (5.5 mm x 2.1 mm connector); none is listed in the box, which holds the access point, mounting bracket, screws, expansion anchors and guide. To use the 2.5 Gbps uplink you need a switch with a 2.5G port and a sound network cable run to it; otherwise the link runs at 1 Gbps.
We are a supplier, not an installer. We will go through the RG-RAP2260 with you before you buy — the PoE+ power it needs, whether your switch has 2.5G ports and how many access points the site needs — and depending on your requirements and your area we can recommend a qualified trade installer. We have been operating since 2012 and you can visit our trade counter in Wolverhampton.
Ruijie list PoE and PoE+ as power options, but the maximum consumption is 18 W and a standard 802.3af port supplies up to 15.4 W. Use a PoE+ (802.3at) port or injector, or a 12 V DC adapter, so the access point has its full power available.
No, but you need one to benefit from the 2.5 Gbps uplink. The uplink port is 10/100/1000/2500BASE-T, so it also links at 1 Gbps to an ordinary Gigabit switch.
The hardware maximum is 512 associated wireless clients, with up to 64 on 2.4 GHz and 512 on 5 GHz. Ruijie quote 500+ client connections; the practical number per access point depends on what those clients are doing.
Ruijie's packing list shows the access point, a mounting bracket, two screws, two expansion anchors and a quick start guide. No power adapter is listed, so use PoE+ or buy a 12 V, 2 A adapter separately.
Ruijie's page lists free cloud management through Ruijie Cloud, with self-organising network (SON), centralised network management, scenario-based configuration, cloud portal authentication and remote monitoring.
Delivery is within 1–3 working days to England, Scotland and Wales. We do not ship to Northern Ireland.
Yes. Our trade counter is at Unit 3, Park View Centre, 243 Dudley Road, Wolverhampton WV2 3JU. Call first so we can confirm the item is there for you.
Questions on specification or compatibility: call 01902 902251, see our FAQ and support pages, or contact us. Trade accounts are available — see trade customers. Browse the full Ruijie Reyee range.
| Product Code | RG-RAP2260 |
|---|---|
| Dimensions | 194 mm x 194 mm x 45.1 mm (excluding the mounting bracket) |
| Manufacturer | Ruijie Reyee |
| Colour | White |
| Power Features | DC power adapter or PoE/PoE+, max 18 W |
| Connection Type | Wireless |
We provide tailored support for you and your CCTV system.
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
As cheap as £10, we will deliver your order 3 to 5 working days!
