RUIJIE - RG-AP820-L(V3) - Wi-Fi 6 AX3000 Dual-Radio Indoor Access Point, 2.5GE SFP
Product Features
Ruijie RG-AP820-L(V3) is a Wi-Fi 6 AX3000 dual-radio indoor access point with a Gigabit port taking 802.3af PoE and a 2.5GE SFP port. The 48 V DC adapter is bought separately; a PoE switch or injector is needed to use PoE.
RG-AP820-L(V3) — Wi-Fi 6 AX3000 Dual-Radio Indoor Access Point, 2.5GE SFP
The Ruijie RG-AP820-L(V3) is a Wi-Fi 6 AX3000 indoor access point with a 2.4 GHz radio and a 5 GHz radio. It adds a 2.5GE SFP port beside the Gigabit port and carries an IP41 rating.
What the RG-AP820-L(V3) is for
Ruijie position the RG-AP820-L(V3) for indoor scenarios in higher education, government, general education, finance and business. The 2.4 GHz radio reaches up to 574 Mbps and the 5 GHz radio up to 2.402 Gbps on a 160 MHz channel, for a combined peak of 2.976 Gbps.
It supports up to 256 associated clients, varying with the environment, with a recommended maximum of 120 active devices. Fat, Fit and Cloud modes are available, managed through Ruijie Cloud or Eweb, and WDS and bridge VLAN are listed as supported. It sits well among other access points on a wired network.
The SFP port is a 2.5GE port that takes 1GE modules. Ruijie list no module with the product, so an SFP module is a separate purchase if you want to use that port.
Key features
- Up to 574 Mbps on 2.4 GHz and 2.402 Gbps on 5 GHz, for a combined peak of 2.976 Gbps
- Gigabit port with PoE input plus a 2.5GE SFP port that is compatible with 1GE modules
- IP41 rating with an operating temperature range of –10°C to +50°C
- Runs from 802.3af PoE or 48 V DC, with a maximum power consumption of 12.95 W
- Wall or ceiling mounting with bracket included, plus Kensington lock and securing latch
- Fat, Fit and Cloud modes, with management through Ruijie Cloud or the Eweb interface
Full specification
| Unit dimensions (W x D x H) | 220 mm x 220 mm x 49 mm (8.66 in. x 8.66 in. x 1.93 in.) |
| Unit weight | Main unit: 0.6 kg (1.32 lbs); Mounting bracket: 0.2 kg (0.44 lbs) |
| Mounting | Wall/Ceiling-mount (a mounting bracket is delivered with the main unit) |
| Lock option | Kensington lock and securing latch |
| Radio design | Dual-radio and up to four spatial streams: Radio 1: 2.4 GHz, two spatial streams, 2x2 MIMO; Radio 2: 5 GHz, two spatial streams, 2x2 MIMO |
| Data rates | Combined peak data rate: 2.976 Gbps; 2.4 GHz radio; Two spatial stream Single User (SU) MIMO for up to 574 Mbps wireless data rate to individual 2SS HE40 802.11ax client devices (maximum); Two spatial stream Single User (SU) MIMO for up to 287 Mbps wireless data rate to individual 2SS HE20 802.11ax client devices (typical); 5 GHz radio; Two spatial stream Single User (SU) MIMO for up to 2.402 Gbps wireless data rate to individual 2SS HE160 802.11ax client devices (maximum); Two spatial stream Single User (SU) MIMO for up to 1.201 Gbps wireless data rate to individual 2SS HE80 802.11ax client devices (typical) |
| Antenna type | Built-in omnidirectional antennas (two 2.4 GHz antennas and two 5 GHz antennas) |
| Antenna gain | 2.4 GHz: 5 dBi; 5 GHz: 5 dBi |
| Maximum transmit power | 2.4 GHz radio: 26 dBm (23 dBm per chain); 5 GHz radio: 26 dBm (23 dBm per chain); Note: The transmit power is limited by local regulatory requirements. For details, see WLAN Country or Region Codes and Channel Compliance.; Thailand; 2.400 GHz to 2.4835 GHz, EIRP ≤ 20 dBm; 5.150 GHz to 5.350 GHz, EIRP ≤ 23 dBm; 5.470 GHz to 5.725 GHz, EIRP ≤ 30 dBm; 5.725 GHz to 5.825 GHz, EIRP ≤ 30 dBm; Egypt; 2.400 GHz to 2.4835 GHz, EIRP ≤ 20 dBm; 5.150 GHz to 5.350 GHz, EIRP ≤ 23 dBm; Vietnam:; 2400-2483.5 MHz, EIRP ≤ 23 dBm; 5150-5350 MHZ, EIRP ≤ 23 dBm; 5470-5725 MHz, EIRP ≤ 30 dBm; 5725-5850 MHz, EIRP ≤ 30 dBm |
| Power increment | Configurable in increments of 1 dBm |
| Bluetooth | Bluetooth 5.1 |
| Antenna type | Onboard omnidirectional antenna |
| Maximum antenna gain | 2.4 dBi, with a downtilt angle of roughly 30 degrees |
| Maximum transmit power | 17 dBm (GFSK); 14 dBm (π/4-DQPSK, 8-DPSK) |
| Fixed service port | 1 x 10/100/1000BASE-T port; In compliance with IEEE 802.3af standard (PoE); Auto MDI/MDIX crossover; PoE-PD: 54 V DC (nominal) 802.3af/at/bt (Class 3 or higher); 802.3az EEE; 1 x 2.5GE SFP port, compatibility with 1GE module |
| Fixed management port | 1 x RJ45 console port (serial console port) |
| Button | 1 x Reset button; Press the button for shorter than 2 seconds. Then the device restarts.; Press the button for longer than 5 seconds. Then the device restores to factory settings. |
| Input power supply | The AP supports the following two power supply modes: 48 V DC/0.6 A power input over DC connector: The DC connector accepts 2.1 mm/5.5 mm center-positive circular plug. A DC power adapter needs to be purchased separately.; PoE input over LAN 1: The power source equipment (PSE) complies with IEEE 802.3af standard (PoE).; Note: If both DC power and PoE are available, DC power is preferred. |
| Overall power consumption | Maximum power consumption: 12.95 W; DC powered: 12.95 W; PoE powered (802.3af): 12.95 W; PoE+ powered (802.3at): 12.95 W; PoE++ powered (802.3bt): 12.95 W; Idle mode: 6 W |
| Temperature | Operating temperature: –10°C to +50°C (14°F to +122°F); Storage temperature: –40°C to +70°C (–40°F to +158°F); Note: At an altitude in the range of 3,000–5,000 m (9,842.52–16,404.20 ft.), every time the altitude increases by 220 m (722 ft), the maximum temperature decreases by 1°C (1.8°F). |
| IP rating | IP41 |
| Humidity | Operating humidity: 0% RH to 95% RH (non-condensing); Storage humidity: 0% RH to 95% RH (non-condensing) |
| Mean Time Between Failure (MTBF) | 200,000 hours (22 years) at the operating temperature of 25°C (77°F) |
| Recommended maximum number of active devices per AP | 120 |
| Maximum number of associated clients | 256; Note; The number of associated clients varies according to the environment. |
| Maximum number of BSSIDs | 32 (up to 16 BSSIDs per radio) |
| STA management | SSID hiding; Each SSID can be configured with the authentication mode, encryption mechanism, and VLAN attributes independently.; Remote intelligent perception technology (RIPT); Intelligent client identification technology; Intelligent load balancing based on the STA quantity or traffic |
| STA limiting | SSID-based STA limiting; Radio-based STA limiting |
| Bandwidth limiting | STA/SSID/AP-based rate limiting |
| Wireless roaming | Layer 2 and Layer 3 roaming |
| Bridge Vlan | Supported |
| Wireless Distribution System (WDS) | Supported |
The table shows the hardware specification. Ruijie publish the full software feature list on the datasheet; ask us if you need a particular protocol or feature confirmed.
What you will need
You need a power source: an 802.3af (or higher) PoE switch port or PoE injector on the Gigabit port, or a 48 V DC/0.6 A adapter, which Ruijie state is purchased separately. Maximum draw is 12.95 W, so standard PoE is enough. If you want to use the SFP port you need an SFP module. Fit mode works with a wireless access controller.
Buying from Zenith Security Co.
We are a supplier, not an installer. We will go through the RG-AP820-L(V3) with you before you buy — how you will power it, whether you need the SFP port and how many clients each access point will carry — and depending on your requirements and your area we can recommend a qualified trade installer. We have been operating since 2012 and you can visit our trade counter in Wolverhampton.
What ports does the RG-AP820-L(V3) have?
One 10/100/1000BASE-T port with 802.3af PoE input, one 2.5GE SFP port that takes 1GE modules, and an RJ45 console port.
Does the RG-AP820-L(V3) have an IP rating?
Yes, Ruijie list IP41 with an operating range of -10°C to +50°C. Ruijie position it for indoor scenarios.
How is the RG-AP820-L(V3) powered?
By 802.3af PoE on the Gigabit port or a 48 V DC/0.6 A adapter, which is bought separately. Maximum power consumption is 12.95 W, and if both are connected DC power is preferred.
How many clients does the RG-AP820-L(V3) support?
Up to 256 associated clients depending on the environment, with a recommended maximum of 120 active devices.
How quickly can I get it?
Delivery is within 1–3 working days to England, Scotland and Wales. We do not ship to Northern Ireland.
Can I collect or see one before buying?
Yes. Our trade counter is at Unit 3, Park View Centre, 243 Dudley Road, Wolverhampton WV2 3JU. Call first so we can confirm the item is there for you.
Questions on specification or compatibility: call 01902 902251, see our FAQ and support pages, or contact us. Trade accounts are available — see trade customers. Browse the full Ruijie Reyee range.
| Product Code | RG-AP820-L(V3) |
|---|---|
| Dimensions | 220 mm x 220 mm x 49 mm |
| Manufacturer | Ruijie Reyee |
| Colour | White |
| Connection Type | Wireless |
TECHNICAL SUPPORT
We provide tailored support for you and your CCTV system.
3 YEAR WARRANTY
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
COME & VISIT US
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
FREE DELIVERY OVER £ 149.99
As cheap as £10, we will deliver your order 3 to 5 working days!
