The RG-RAP72 is a dual-band Wi-Fi 7 BE3600 ceiling access point with up to 2882 Mbps on 5 GHz and 688 Mbps on 2.4 GHz and a single 2.5GbE port. It draws up to 14 W, so a standard 802.3af PoE port will power it, or it can run from a 12 V DC adapter.
The Ruijie Reyee RG-RAP72 brings Wi-Fi 7 features such as Multi-Link Operation and 4K QAM to a round ceiling access point 195 mm across. Its one Ethernet port runs at up to 2.5 Gbps, so the link back to the switch can carry more than a Gigabit port allows.
Ruijie pitch the RG-RAP72 at smart homes, hotels and offices. It is a dual-band design, 2.4 GHz and 5 GHz with no 6 GHz radio, and both radios are 2x2 MU-MIMO. Ruijie rate its 5 GHz coverage at 140 m², against 110 m² for the traditional Wi-Fi 6 devices they compare it with, and quote a lab-measured speed of 2,714 Mbps.
The Wi-Fi 7 features Ruijie list are Multi-Link Operation, which bonds the 2.4 GHz and 5 GHz bands to reduce lag, 4K QAM for up to 20% faster data speeds, preamble puncturing to make use of bandwidth in crowded environments by bypassing interference-prone channels, and Multiple Resource Units for efficiency when many devices are connected. Client devices must support Wi-Fi 7 themselves to use them.
To run the 2.5GbE port at full speed the switch port at the other end must also support 2.5 Gbps; on a Gigabit switch the link runs at 1 Gbps. The hardware maximum is 511 associated wireless clients with both bands enabled (64 on 2.4 GHz, 511 on 5 GHz). Ruijie also list Reyee Mesh to reduce cabling costs, WIO 3 AI-powered optimisation, a standalone AP portal and an installation heatmap. It is an indoor unit rated IP41 for 0°C to 40°C.
| Product Type | Ceiling AP |
| Radio design | Dual-radio; 4 spatial streams; 2.4 GHz: 2 x 2, MU-MIMO; 5 GHz: 2 x 2, MU-MIMO |
| Maximum wireless data rate | 3570 Mbps |
| 5 GHz wireless data rate | 2882 Mbps |
| 2.4 GHz wireless data rate | 688 Mbps |
| Antenna | 2.4 GHz: 2 built-in omnidirectional antennas; 5 GHz: 3 built-in omnidirectional antennas |
| Product dimensions (diameter x height) | Ø195 mm x 41 mm (Ø7.68 in. x 1.61 in.) (excluding the mounting bracket) |
| Color | White |
| Weight | ≤ 0.6 kg (1.32 lbs.) (without packaging materials) |
| Number of 10/100/1000/2500BASE-T ports | 1 |
| Power supply | DC power adapter; PoE/PoE+; Note: If both the DC power adapter and PoE/PoE+ are available for power supply, the DC power adapter is preferred. |
| Local power supply | Yes, one DC power connector (12 V, 1.5 A) |
| Dimensions of the DC connector | Outer diameter: 5.5 mm (0.22 in.); Inner diameter: 2.1 mm (0.08 in.); Depth: 10 mm (0.39 in.) |
| Maximum power consumption | 14 W |
| Operating temperature | 0°C to 40°C (32°F to 104°F) |
| Mounting options | Ceiling/Wall |
| IP rating | IP41 |
| Maximum number of associated wireless clients | 64 (2.4 GHz); 511 (5 GHz); 511 (2.4 GHz and 5 GHz enabled) |
| Maximum number of devices that can be managed | 300 |
| IPv6 | Yes |
A switch port and power. For the full 2.5 Gbps wired link choose a multi-gigabit port on your network switch; a Gigabit port will link at 1 Gbps. Maximum consumption is 14 W, so a standard 802.3af port on a PoE switch or a PoE injector is enough, though an injector must itself pass 2.5 Gbps if you want that speed. The alternative is a 12 V, 1.5 A DC adapter; Ruijie's page does not list box contents, so ask us whether one is supplied. Use Cat5e or better network cable for the run.
We are a supplier, not an installer. We will go through the RG-RAP72 with you before you buy — whether your switch has 2.5G PoE ports, how many access points you need and where they mount — and depending on your requirements and your area we can recommend a qualified trade installer. We have been operating since 2012 and you can visit our trade counter in Wolverhampton.
No. Its maximum consumption is 14 W, within the 15.4 W of a standard 802.3af port, and Ruijie list both PoE and PoE+ as supported. A 12 V DC adapter can be used instead.
Not to make it work: the port is 10/100/1000/2500BASE-T, so it will link to a Gigabit switch at 1 Gbps. A 2.5G switch port is needed only if you want the wired link to run faster than 1 Gbps.
No. It is dual-band, with up to 688 Mbps on 2.4 GHz and 2882 Mbps on 5 GHz, and Ruijie's specification shows no 6 GHz radio. For 6 GHz see the tri-band RG-RAP73Pro.
Ruijie rate its 5 GHz coverage at 140 m². Walls, ceilings and interference reduce that in practice, so treat it as a guide and ask us if you want help working out how many units a building needs.
The hardware maximum is 511 associated wireless clients with both bands enabled (64 on 2.4 GHz, 511 on 5 GHz). Ruijie's own office example refers to 100+ concurrent connections.
Delivery is within 1–3 working days to England, Scotland and Wales. We do not ship to Northern Ireland.
Yes. Our trade counter is at Unit 3, Park View Centre, 243 Dudley Road, Wolverhampton WV2 3JU. Call first so we can confirm the item is there for you.
Questions on specification or compatibility: call 01902 902251, see our FAQ and support pages, or contact us. Trade accounts are available — see trade customers. Browse the full Ruijie Reyee range.
| Product Code | RG-RAP72 |
|---|---|
| Dimensions | Ø195 mm x 41 mm (excluding the mounting bracket) |
| Manufacturer | Ruijie Reyee |
| Colour | White |
| Power Features | DC power adapter or PoE/PoE+, max 14 W |
| Connection Type | Wireless |
We provide tailored support for you and your CCTV system.
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
As cheap as £10, we will deliver your order 3 to 5 working days!
