Ajax Superior MultiTransmitter IO 4X4 Fibra Wired Input and Output Module (117739)
Product Features
- Superior MultiTransmitter IO (4X4) Fibra wired input and output module (117739).
- 4 inputs for third-party devices: NO, NC, EOL, 2EOL or 3EOL.
- 4 outputs two dry-contact relays and two logic outputs.
- Fibra wired bus on 4-core cable, up to 2,000 m per line.
- Security Grade 3 board only; Ajax Case sold separately. Indoor use.
Ajax Superior MultiTransmitter IO (4X4) Fibra - Wired Input and Output Module (117739)
Superior MultiTransmitter IO (4X4) Fibra is a wired module with 4 inputs and 4 outputs for bringing third-party devices into an Ajax system. The four input zones take detectors and contacts wired as NO, NC, EOL, 2EOL or 3EOL, and the four outputs (two relays and two logic outputs) can control relays, blocking elements and electric locks. It sits on a Fibra line from a hybrid hub, on a 4-core cable that can run up to 2,000 m. It is supplied as a board without a case; Ajax recommends fitting it in an Ajax Case, which is sold separately. Security Grade 3.
Also listed as 117739. Ajax model ID MTR.IO.F.
Key features
- 4 input zones for third-party wired devices: NO, NC, EOL, 2EOL, 3EOL or roller shutter, with automatic EOL resistance measurement.
- 4 outputs: 2 relays with dry contacts (up to 1 A each) and 2 logic outputs (up to 25 mA each).
- Input modes for alarm detection and KeyArm arming switches, in pulse or bistable operation.
- Output modes for relay control, blocking elements and electric locks, with automation scenarios in the Ajax apps.
- Wired devices up to 400 m away; powers connected devices at 12 V DC, up to 500 mA in total.
- Instant detection of cut wires, short circuits and faults on 2EOL and 3EOL zones.
- Fibra wired connection on a 4-core cable, up to 2,000 m, with device authentication.
- Security Grade 3. For indoor use only; sold as a board, with Ajax Case sold separately.
Technical specification
| Model number | 117739; Ajax model ID MTR.IO.F |
|---|---|
| Type | Wired module with 4 inputs and 4 outputs for third-party devices, Ajax Superior range |
| Connection | Fibra wired bus on a 4-core cable, to any point of the Fibra line; line length up to 2,000 m; encrypted communication |
| Inputs | 4 input lines for third-party devices (Z1-Z4 and COM) |
| Input connection types | NO, NC, EOL, 2EOL, 3EOL, roller shutter; EOL total resistance from 1 kΩ to 15 kΩ in 100 Ω steps |
| Input modes | Alarm detection; arming mode switching (KeyArm); pulse or bistable operation |
| Cable length to wired devices | Up to 400 m (EOL connection) |
| Outputs | 4: 2 relays with dry contacts (maximum switching current 1 A) and 2 logic outputs (up to 25 mA) |
| Output modes | Relay, blocking element, electric lock |
| Operating time | From 1 s to 3 min (pulse mode, each relay) |
| Relay state stability | Optional: relay state kept if power from the hub fails |
| Anti-tamper | Connector for a tamper board; device authentication; connection loss detected after 36 s |
| Power from the Fibra line | 12-28 V DC, up to 330 mA at 24 V DC nominal |
| Power for connected devices | 12 V DC, up to 500 mA in total |
| Operating environment | -10 °C to +55 °C, humidity up to 75% non-condensing, indoors only |
| Dimensions | 93 × 55 × 27 mm |
| Weight | 46 g |
| In the box | Superior MultiTransmitter IO (4X4) Fibra, quick start guide |
| Security grade and certifications | Security Grade 3, environmental class II; EN 50131-1, EN 50131-3; PD 6662:2017 |
Works with
Ajax hubs with Fibra lines: Superior Hub Hybrid (2G), Superior Hub Hybrid (4G), Superior Hub Hybrid 2 and Superior MegaHub. On the wired side it accepts third-party detectors and contacts, and its outputs can control relays, blocking elements and electric locks. Fit it in an Ajax Case, sold separately.
Common questions
What can I connect to the inputs?
Third-party wired devices such as door contacts, shock sensors, glass-break detectors and gas or water leak sensors, wired as NO, NC, EOL, 2EOL, 3EOL or roller shutter.
What do the outputs do?
There are 2 relay outputs with dry contacts (up to 1 A) and 2 logic outputs (up to 25 mA). They can be set to relay, blocking element or electric lock modes.
Can it power the connected devices?
Yes, at 12 V DC and up to 500 mA in total.
Does it come with a case?
No. It is supplied as a board with a quick start guide. Ajax recommends fitting it in an Ajax Case, which is sold separately.
Which hub does it need?
An Ajax hub with Fibra lines, such as Superior Hub Hybrid (2G), Superior Hub Hybrid (4G), Superior Hub Hybrid 2 or Superior MegaHub.
Full manufacturer specification: Ajax Superior MultiTransmitter IO (4X4) Fibra product page
Supplied by Zenith Security Co, Wolverhampton. Orders placed before 2:30pm are normally dispatched for delivery within 1-2 working days to England, Scotland and Wales, or collect from our Wolverhampton trade counter (please call first).
Browse the full Ajax range, more Ajax accessories, or contact us on 01902 902251 for advice.
| Product Code | 117739 |
|---|---|
| Brand | AJAX |
| Device Type | Input/Relay Module |
| Product Type | Intruder & Smoke Alarm |
| Technology | Fibra (wired) |
| Security Grade | Grade 3 |
| Ajax Range | Superior |
| Connection Type | Wired |
| Indoor/Outdoor | Indoor Only |
TECHNICAL SUPPORT
We provide tailored support for you and your CCTV system.
3 YEAR WARRANTY
Many of our Cameras and Recorders come with a comprehensive 3 year warranty.
COME & VISIT US
We've got a fully functioning show room and IP suite to show you exactly how our CCTV equipment works
FREE DELIVERY OVER £ 499
As cheap as £10, orders placed before 2:30pm are dispatched for delivery within 1–2 working days!
