Bell System VRP Vandal Resistant Audio Door Entry Panel

Bell System VRP Vandal Resistant Audio Door Entry Panel

The Bell System VRP is a vandal resistant audio door entry panel for entrances that may see high traffic or the chance of vandalism. Bell says these panels are preferred by local authority and public housing. Bell says no panel can withstand extreme acts of vandalism, and that the VRP is designed to resist all but the most determined vandals. It is also the front door panel Bell supplies in its VRK kits.

Each panel is 2.5mm 316 marine grade stainless steel, or solid brass on the VRP1-B. Flush panels come with a zintec back-box, and surface panels with a stainless steel cowling. Tamper proof bolts fix the panel to its back-box, and a special 1/4 inch hex bit is supplied. Each station has one stainless steel vandal resistant push-button, or a brass button on the brass panel, attached by a nut on the rear of the panel.

Key features

• 2.5mm 316 marine grade stainless steel, or solid brass
• Flush mounting with a zintec back-box, or surface fitting with a stainless steel cowling
• Tamper proof bolts, with a special 1/4 inch hex bit supplied
• Stainless steel vandal resistant push-button per station, brass on the brass panel
• A number or letter can be engraved by each push-button for permanent identification
• Engraving of flat numbers included in the price
• Custom layouts can include extra text, a trades facility, a CCD camera cut out, a proximity reader cut out or a keypad
• Can be manufactured to custom dimensions

Choosing the right option

Choose one push-button for each station, and add one more if you need a Tradesmen or Services button. Pick flush to set the panel into the wall in a zintec back-box, or surface, coded -S, to fit it on the wall with a stainless steel cowling. The finish is 316 stainless steel across the range, and solid brass is offered here as a 1 button panel, the VRP1-B.

• 316 stainless steel: Panel in 2.5mm 316 marine grade stainless steel with stainless steel vandal resistant push-buttons.
• Solid brass: Panel in solid brass with brass push-buttons, offered on this price list as a 1 button panel, the VRP1-B.

Options and prices

73 options, from £109.79 to £1088.79 including VAT. Pick yours from the boxes above; each stock code below is the Bell System order code.

Specifications

You may also need

• Bell System VRK Vandal Resistant Audio Door Entry Kit
• Bell System LCP Laser Cut Vandal Resistant Audio Door Entry Panel
• Bell System Custom Engraving and Panel Options
• Bell System Door Entry Panel Back Boxes
• Bell System 801 Audio Door Entry Telephone
• Bell System XL5 Audio Door Entry Telephone
• All Bell System door entry

Common questions

Does a VRP panel come with engraving?

Yes. A number or letter can be engraved by each push-button for permanent identification, and engraving of flat numbers is included in the price. Further engraving, such as building names or instructions, costs extra.

How do I order a trades button on a VRP panel?

Include one extra push-button in the size you choose. Bell's ordering advice is to order VRP followed by the number of push-buttons, with an extra one should a Tradesmen or Services button be required. A four button flush panel is a VRP4, and the surface version a VRP4-S.

Will a stainless steel VRP panel tarnish?

Bell uses 316 marine grade stainless steel, but says panels can still be prone to tarnishing in some coastal locations or in areas of industrial pollution. If the building is near the coast or in an industrial area, check that the panel suits the site before ordering.

What is the difference between the VRP and the LCP?

Both are Bell System vandal resistant panels in 2.5mm 316 marine grade stainless steel. Bell says the LCP offers even greater protection. Its removable plate sits in an overlapping bezel cut from the same sheet, leaving a gap of just 0.3mm, which Bell says rejects implements that could be used to force the panel from its box.

How long will my Bell System order take?

Many Bell panels and kits are engraved and built to order, so lead times vary by model. Call 01902 902251 or email sales@zenithsecurityco.co.uk before ordering and we will confirm the current lead time. We ship nationally to England, Scotland and Wales.

Can I get trade prices or advice on the right kit?

Yes. Installers can apply for a Zenith trade account, and our team can help you match panels, telephones and power supplies for your building. Call 01902 902251 or email sales@zenithsecurityco.co.uk.

Supplied by Zenith Security Co, Wolverhampton. Website zenithsecurityco.co.uk, call 01902 902251 or email sales@zenithsecurityco.co.uk. We ship nationally to England, Scotland and Wales; delivery is charged at checkout. Browse all Bell System door entry or our intercoms and door entry range.