Dahua VTM116-01 - Flush Mounted Back Box for Dahua VTO Video Intercom Door Station

Dahua VTM116-01 - Flush Mounted Back Box for Dahua VTO Video Intercom Door Station

The Dahua VTM116-01 is a flush mounted box (back box) for installing a compatible Dahua VTO video intercom door station recessed into a wall rather than surface mounted. It is built from ADC12 die-cast aluminium for a rigid, durable housing.

Who is it for?

This back box is for installers fitting a Dahua VTO video door station where a neat, flush-to-wall finish is wanted instead of a surface-mount bracket. It is a passive mounting accessory rather than a door station in its own right: it has no camera, speaker or call button of its own, so it must be paired with a compatible Dahua VTO unit and a wall opening cut to size before fitting.

Key features

• Flush mounted box for Dahua VTO video door stations
• ADC12 die-cast aluminium
• Front dimensions 138.0 x 240.0 x 35.0mm (5.43 x 9.45 x 1.38 inch)
• Rear dimensions 120.8 x 222.7 x 33.0mm (4.76 x 8.77 x 1.30 inch)
• Wall opening required 120.8 x 222.7 x 33.0mm (4.76 x 8.77 x 1.30 inch)

Technical specification

What you will need

• A compatible Dahua VTO video door station to fit inside the box
• A wall opening cut to the box's rear dimensions before installation
• Power and network cabling run to the opening, to suit the chosen VTO door station

Related products

Dahua VTM117 surface mounted box, Dahua DHI-VTO6631QB-WP touchscreen video door station and Dahua DHI-VTO3222E-P outdoor keypad station. Dahua's datasheet for the VTM116-01 does not list door station models, so check your door station before ordering.

Common questions

Is the VTM116-01 a complete door station?

No. It is a mounting back box only. You need a compatible Dahua VTO video door station to install into it.

What is the VTM116-01 made from?

ADC12 die-cast aluminium, for a rigid housing suitable for flush wall installation.

What size wall opening do I need?

The rear of the box measures 120.8 x 222.7 x 33.0mm, and Dahua gives the wall opening dimensions as the same, 120.8 x 222.7 x 33.0mm.

How is the VTM116-01 installed?

Dahua's steps are: cut an opening in the wall the size of the mounting box; pull the cables through the cable hole and fix the box in the wall with cement; connect the cables to the ports on the door station rear panel through the enclosure; fix the door station in the enclosure with M3 screws and put sealant between them; then fix the door station and enclosure in the mounting box with ST4x25 screws.

Which door stations fit the VTM116-01?

Dahua's datasheet describes it as a flush mounted box for the VTO and does not list models. Tell us your exact door station model and we will confirm before you order.

Full manufacturer specification: Dahua product page

Browse the full Dahua range, our Access control category, or contact us on 01902 902251. Trade customers are welcome at our Wolverhampton trade counter.

Supplied by Zenith Security Co, Wolverhampton. We deliver to England, Scotland and Wales, or you can collect from our Wolverhampton trade counter (please call first).

Browse the range: Dahua video intercom · Dahua cameras.