We supply fire alarm equipment to installers, electricians and businesses in England, Scotland and Wales. Our wired fire alarm systems are from Fike and are built around the Twinflex Pro system: control panels, ready-made kits, detectors, sounders, call points and the spare parts that go with them. We also stock Ajax wireless fire alarms, and wireless smoke, heat and carbon monoxide detectors from Hikvision, HiLook, Dahua, Texecom, Pyronix, Visonic, Honeywell and Yale. Use the Manufacturer filter to see one brand at a time. We are a fire alarm supplier based in Wolverhampton, in the West Midlands, and we send orders out from there.
Fire alarm equipment in this range
- Panels and kits – Twinflex Pro panels in 2, 4 and 8 zone sizes, a kit for each size, a 4–8 zone expander and a conventional expansion card. See fire alarm panels and kits.
- Detectors – Twinflex Multipoint detectors (with or without a built-in sounder), SITA Multipoint detectors and mounting bases. See fire alarm panel detectors.
- Sounders and call points – Twinflex Hatari (red or white), Multipoint, HiPoint IP65 and Flashpoint sounders, plus standard and weatherproof manual call points, covers and test keys.
- Extinguishing control – the Twinflex SRP panel, remote status indicator, modules, manual release units and connecting leads. See extinguishing equipment.
- Wireless fire alarms – the Ajax EN54 Fire Hub, Fire ReX range extender, FireProtect smoke, heat and CO detectors, sounders and visual alarm devices.
- Detectors for alarm panels – wireless smoke, heat and carbon monoxide detectors for Hikvision AX PRO, Texecom Ricochet, Pyronix Enforcer and Visonic PowerG systems, Texecom Exodus wired heat detectors, plus smoke alarms from HiLook, Dahua, Honeywell and Yale.
- Spares and accessories – head removal tools, spare panel keys, a battery kit, a remote indicator and an input/output module.
What “two-wire” means
On a Twinflex Pro system, each zone uses one circuit for both the detectors and the sounders. In plain terms, you run one pair of wires around each zone instead of separate circuits for detection and for the alarm. The Twinflex Pro panel is listed as working with earlier Twinflex devices, which helps if you are extending or updating an existing Twinflex system.
Choosing detectors
Smoke detectors are not right for every room. A kitchen normally needs a heat detector, because cooking can set off a smoke sensor. Hallways and escape routes usually need smoke or multi-sensor detection. The building’s fire risk assessment, and the person designing the system, should set the final specification.
Looking for a single smoke alarm for a home rather than a panel system? Our standalone wireless smoke alarms, such as the HiLook HL-S3E, are listed here and with our alarm detectors.
Buying fire alarm equipment from us
We supply equipment; we do not install it. We can go through the products with you before you buy and, depending on your requirements and area, recommend a qualified trade installer. Installers and trade buyers can open a trade account.
Orders placed before 2:30pm are normally dispatched for delivery within 1–2 working days to England, Scotland and Wales. We do not ship to Northern Ireland. If you are near Wolverhampton and would rather collect or see equipment at our trade counter, see fire alarm equipment in Wolverhampton.
Common questions
Do you deliver fire alarm equipment across the UK?
We deliver to England, Scotland and Wales. Orders placed before 2:30pm are normally dispatched for delivery within 1–2 working days. We do not ship to Northern Ireland.
Can I buy Twinflex parts to extend an existing system?
Yes. Panels, expanders, detectors, sounders, call points and spares are sold individually, so you can add to a system without buying a full kit.
Can I get trade prices on fire alarm equipment?
Yes. Installers and businesses can register for a trade account to see trade pricing.
More from Zenith Security Co.
Fire Alarms
We supply fire alarm equipment to installers, electricians and businesses in England, Scotland and Wales. Our wired fire alarm systems are from Fike and are built around the Twinflex Pro system: control panels, ready-made kits, detectors, sounders, call points and the spare parts that go with them. We also stock Ajax wireless fire alarms, and wireless smoke, heat and carbon monoxide detectors from Hikvision, HiLook, Dahua, Texecom, Pyronix, Visonic, Honeywell and Yale. Use the Manufacturer filter to see one brand at a time. We are a fire alarm supplier based in Wolverhampton, in the West Midlands, and we send orders out from there.
Fire alarm equipment in this range
- Panels and kits – Twinflex Pro panels in 2, 4 and 8 zone sizes, a kit for each size, a 4–8 zone expander and a conventional expansion card. See fire alarm panels and kits.
- Detectors – Twinflex Multipoint detectors (with or without a built-in sounder), SITA Multipoint detectors and mounting bases. See fire alarm panel detectors.
- Sounders and call points – Twinflex Hatari (red or white), Multipoint, HiPoint IP65 and Flashpoint sounders, plus standard and weatherproof manual call points, covers and test keys.
- Extinguishing control – the Twinflex SRP panel, remote status indicator, modules, manual release units and connecting leads. See extinguishing equipment.
- Wireless fire alarms – the Ajax EN54 Fire Hub, Fire ReX range extender, FireProtect smoke, heat and CO detectors, sounders and visual alarm devices.
- Detectors for alarm panels – wireless smoke, heat and carbon monoxide detectors for Hikvision AX PRO, Texecom Ricochet, Pyronix Enforcer and Visonic PowerG systems, Texecom Exodus wired heat detectors, plus smoke alarms from HiLook, Dahua, Honeywell and Yale.
- Spares and accessories – head removal tools, spare panel keys, a battery kit, a remote indicator and an input/output module.
What “two-wire” means
On a Twinflex Pro system, each zone uses one circuit for both the detectors and the sounders. In plain terms, you run one pair of wires around each zone instead of separate circuits for detection and for the alarm. The Twinflex Pro panel is listed as working with earlier Twinflex devices, which helps if you are extending or updating an existing Twinflex system.
Choosing detectors
Smoke detectors are not right for every room. A kitchen normally needs a heat detector, because cooking can set off a smoke sensor. Hallways and escape routes usually need smoke or multi-sensor detection. The building’s fire risk assessment, and the person designing the system, should set the final specification.
Looking for a single smoke alarm for a home rather than a panel system? Our standalone wireless smoke alarms, such as the HiLook HL-S3E, are listed here and with our alarm detectors.
Buying fire alarm equipment from us
We supply equipment; we do not install it. We can go through the products with you before you buy and, depending on your requirements and area, recommend a qualified trade installer. Installers and trade buyers can open a trade account.
Orders placed before 2:30pm are normally dispatched for delivery within 1–2 working days to England, Scotland and Wales. We do not ship to Northern Ireland. If you are near Wolverhampton and would rather collect or see equipment at our trade counter, see fire alarm equipment in Wolverhampton.
Common questions
Do you deliver fire alarm equipment across the UK?
We deliver to England, Scotland and Wales. Orders placed before 2:30pm are normally dispatched for delivery within 1–2 working days. We do not ship to Northern Ireland.
Can I buy Twinflex parts to extend an existing system?
Yes. Panels, expanders, detectors, sounders, call points and spares are sold individually, so you can add to a system without buying a full kit.
Can I get trade prices on fire alarm equipment?
Yes. Installers and businesses can register for a trade account to see trade pricing.
More from Zenith Security Co.
- Sold OutFike
- Fike
- Sold OutFike
- Fike
- Fike
