How to stop CCTV and network kit overheating in summer

Heat shortens the life of CCTV and network equipment, from cameras on sun-baked walls to recorders and switches packed into hot cupboards. The fix is a mix of choosing kit with a suitable operating temperature range and installing it so heat can escape. Here is how to protect a system before the next hot spell.

Two ways heat causes problems

Outside: direct sun

A camera on a south-facing wall can get far hotter than the air temperature suggests. Hikvision notes that prolonged heat can reduce image quality, speed up wear and, at worst, cause a device to fail completely, leaving a site unprotected.

Inside: crowded cabinets

Recorders, PoE switches, power supplies and batteries all produce heat. Put them together in a small cabinet, cupboard or loft and the temperature climbs, especially in summer. Hikvision highlights batteries as needing particular care, and warns that overheating equipment can create fire risks and power instability.

Check the operating temperature on the datasheet

Hikvision says typical security cameras are rated to around 40°C, while many of its own models go further. Figures it quotes include:

  • Some standard cameras rated from -30°C to 60°C, or up to 65°C.
  • Thermal cameras that keep working at up to 70°C.
  • Specialist high-temperature cameras rated to 250°C, using water or air cooling.
  • Outdoor access points rated to 55°C.
  • Outdoor wireless bridges rated to 70°C.
  • Industrial switches rated to 75°C.

Ratings vary model by model, so check the specific datasheet rather than assuming every product in a range is the same.

Displays and monitoring

For outdoor LED displays, Hikvision says its flip-chip COB technology uses up to 45% less energy and runs 5–10°C cooler. On larger sites, its thermography products can watch equipment temperatures, alert operators to hot spots and track trends so parts are replaced before they fail.

Power protection

Hot weather can bring heavier demand on the electricity supply. A UPS keeps recorders and switches running through brief outages and helps smooth out voltage dips.

Installation tips that keep kit cool

  • Use shade. Mount cameras under eaves or soffits where possible, and avoid positions that sit in full sun all afternoon.
  • Add a sunshield or housing. Many outdoor cameras accept a hood, and exposed sites benefit from a proper enclosure.
  • Leave space around equipment. Recorders and switches need clear air around their vents, so do not stack them tightly or bury them in insulation.
  • Choose a ventilated cabinet. A wall cabinet with fans or vents is far better than a sealed cupboard.
  • Think about lofts. Roof spaces can get very hot in summer, so a cooler location for the NVR is worth the extra cable.

Maintenance that prevents failures

  • Monitor temperatures. Many recorders and switches report internal or drive temperatures, so check them during hot weather.
  • Keep things clean. Dust clogs vents and fans, so clean equipment and filters during service visits.
  • Inspect cooling. Make sure cabinet fans are spinning and vents are clear on every visit.
  • Watch the hard drives. Drives are sensitive to heat, and a cool, ventilated recorder will be more reliable.

Buying Hikvision from Zenith

Zenith Security Co. is an authorised Hikvision partner with a Wolverhampton trade counter, and orders are dispatched within 1–2 working days. Browse Hikvision IP cameras and compare operating temperatures on each datasheet, pick up housings and brackets from CCTV accessories, and keep recorders and switches cool in a ventilated unit from our data cabinets range. For switches and outdoor wireless, see data networking. Hikvision prices are shown to signed-in trade customers.

Frequently asked questions

What temperature can CCTV cameras handle?

It depends on the model. Hikvision says typical cameras are rated to about 40°C, while many of its models are rated to 60°C or 65°C. Always check the datasheet.

Can I put my NVR in the loft?

It is best avoided, as lofts can get very hot in summer. Choose a cooler, ventilated spot or a cabinet with fans.

Do sunshields really help?

Yes. Shading the camera body reduces heat build-up from direct sun, which is one of the simplest ways to keep a camera within its rated range.

Why does my recorder keep restarting in hot weather?

Overheating is a common cause. Check the vents are clear, the fans are working and there is space around the unit.

Source: Hikvision, Heat dissipation and overheating protection: How Hikvision keeps security systems running in extreme conditions. Product details are correct at the time of writing; always check the latest Hikvision datasheet before installation.

Published at: 15-11-2026 / 3 Views
  • Ajax logo
  • AV:Link logo
  • Adastra logo
  • AudioCodes logo
  • Brackenheath logo
  • C.K Tools logo
  • Cisco logo
  • Citronic logo
  • Coast logo
  • Cürv logo
  • Dahua logo
  • EPOS logo
  • Eagle CCTV logo
  • Excel Networking logo
  • Fike logo
  • Gigaset logo
  • Grandstream logo
  • HP Poly logo
  • HiLook by Hikvision logo
  • Hikvision logo
  • Honeywell logo
  • Jabra logo
  • Lexstar logo
  • Mercury logo
  • Mercusys logo
  • Mitel logo
  • Panasonic logo
  • Paxton logo
  • Pyronix logo
  • Ring logo
  • Ruijie Reyee logo
  • SPRO logo
  • Samsung logo
  • Shokz logo
  • TP-Link logo
  • TP-Link Omada logo
  • TP-Link VIGI logo
  • Tenda logo
  • Texecom logo
  • Toshiba logo
  • Ubiquiti logo
  • Unify logo
  • Union logo
  • Uniview logo
  • Valcom logo
  • Visonic logo
  • Western Digital logo
  • Yale logo
  • Yealink logo
  • Yeastar logo
  • Yuasa logo
  • Zenith Security Co. logo
  • Zinc logo