OODPCVS is the seven-level image detail scale in IEC 62676-4:2025, and it replaces the four-level DORI scale used since 2014. The biggest practical change is that identifying a person or reading a number plate now calls for 500 pixels per metre at the target, double the 250 px/m DORI asked for. If you specify, quote or install CCTV, it is worth updating your design habits now.
IEC 62676-4 is the part of the international video surveillance standard that deals with application guidelines, including how much detail a camera needs to deliver for a given job. The 2014 edition gave the industry DORI: Detection, Observation, Recognition and Identification. It was easy to remember and ended up on almost every camera datasheet.
The 2025 edition swaps DORI for a finer scale called OODPCVS. The seven levels are:
The level names keep the standard's own spelling, so you will see them written this way on datasheets and design tools.
Hikvision points to three drivers. Cameras have moved on a long way since 2014, with high-resolution and multi-sensor models now routine. AI analytics such as person and vehicle classification, face matching and plate reading each need their own level of detail, and four broad bands could not describe them well. And CCTV now covers far more varied sites, from logistics yards to energy plants, where vague requirements lead to disappointing results.
Pixel density is simply the number of horizontal image pixels that land on each metre of scene width at the distance you care about. Hikvision gives these example pairings of task, OODPCVS level and density:
The headline for most installers is the Validate figure. Under DORI, 250 px/m counted as Identification. Under OODPCVS the equivalent job needs 500 px/m, which gives more margin in poor light and when subjects are moving.
To estimate the widest scene a camera can cover at a given level, divide its horizontal pixel count by the target density:
The scene width is measured at the target distance, so a varifocal lens set tighter, or a camera mounted closer to the doorway, is often a better fix than simply buying more megapixels.
Rather than saying "cover the car park", agree a level for each zone with the customer. A shop entrance might need Validate so faces are usable as evidence, the car park might need Characterize for vehicles, and a rear fence might only need Discern for alerts. That makes the brief clearer and stops arguments after handover.
Detection and classification features work best when the scene delivers the density the algorithm expects. If you are relying on AI alerts or face matching, plan the field of view around the level that feature needs, not around how wide a view looks on the screen.
Hikvision says it is updating product specifications and its system design tools to reflect the new standard, while still supporting legacy DORI-based projects. Expect to see both scales side by side for a while, and make sure everyone on the job is quoting the same one.
Zenith Security Co. is an authorised Hikvision partner with a trade counter in Wolverhampton, and orders are dispatched within 1–2 working days. You can browse our full range of Hikvision IP cameras, or look at Hikvision 8MP (4K) cameras when you need more pixels across a wide doorway or forecourt. The CCTV kit builder helps you put a full system together, and if you would like help working out pixel density for a site, contact our team. Hikvision prices are shown to signed-in trade customers.
The 2025 edition of IEC 62676-4 replaces DORI with OODPCVS, but you will still see DORI figures on many existing datasheets and older specifications while the industry catches up.
Under OODPCVS, Hikvision maps facial recognition to the Validate level at 500 px/m, compared with 250 px/m for DORI Identification.
No. Density depends on resolution, lens angle and distance together. A 4K camera viewing a very wide scene can still fall short, so always check density at the target position.
Not automatically. Existing systems built to DORI will keep working, but if a customer wants identification-grade evidence, it is worth reviewing key views against the new 500 px/m target.
Source: Hikvision, Understanding OODPCVS, the new image detail classification framework in IEC 62676-4:2025. Product details are correct at the time of writing; always check the latest Hikvision datasheet before installation.





















































